Featured categories
Your Recently Viewed Products
Rycote Nano-Shield Kit Ns0-Aa
Nano Shield Kit NS0-AA
PRODUCT CODE: RYC086300
The Nano Shield is Rycote’s lightest, smallest and most advanced windshield kit yet. The Nano Shield has been designed to provide excellent wind protection and acoustic transparency for capturing clean audio. The entire kit incorporates many patented designs including improved Lyre shock mounts which are more compliant for lighter microphones and a mounting bar / swivel arm that requires no tools to make adjustments or replace Lyre mounts. The Nano-Shield kits are also extremely versatile with interchangeable basket halves that allow you to change the size of the blimps by swapping out baskets without the need to buy an entire new kit.
Each kit comes ready-to-use and complete with: two magnet lock windshield basket halves with gray wind socks, Windjammer® fur, “no tools needed” mic mounting bar with pair of Nano Shield Lyre® mounts, extra pair of Nano Shield Lyre® mounts, PCS swivel arm with friction brake, interchangeable 3/8” thread mount for swivel arm (for non-PCS usage on booms or stands), PCS ergonomic handle, low-profile XLR cable with built-in RF filter and switchable 80Hz low-cut, 360-adjustable and reversible XLR holder, extra pair of black wind socks and protective case.
FEATURES:
Rycote Invision Inv-1
InVision INV-1
Product Code: 041101
Suitable for the AKG C747, Audio-Technica ATM350, Sennheiser ME36, Schoeps CCM, amongst others.
Main Benefits:
A range of shock mounts and accessories intended for use in studio recording.
The Universal Studio Mount (USM) combines with a new Universal Pop Filter to make a complete vocal microphone suspension and pop filter system that will accommodate virtually any large side address microphone.
Rycote’s InVision models 1 to 3, are designed for discreet, low-profile use of compact microphones in broadcast studio environments where windshielding is not required.
Tech Specs
Width: 11cm
Height: 6cm
Length: 18cm
Fitted with:
– 2 x 9.5mm clips with InVision (43mm wide) Lyre, and a reducing sleeve
– Standard bar with 25mm (1″) centres
– Sleeve clips onto the microphone connector and the cable, leaving the microphone casing free to be fitted with a foam windscreen if required
Lyre Web: InVision
Front clip: 9.5 mm
Back clip: 9.5 mm
Sleeve: Yes
Bar size: Standard
* not suitable for Boom Pole used
Compatibility – https://mymic.rycote.com/products/invision-inv-1/#compatibility
Rycote Invision Inv-6 Heavy
InVision INV-6 Heavy
Product Code: 041117
The INV-6 Heavy is a heavier grade version of the INV-6 which feature firmer Single 82 (19/25) Lyres which will support microphones used with lightweight windshields in ‘run and gun’ scenarios.
Main Benefits:
Part of the larger InVision range of noise-reducing microphone shock-mounts, Rycote’s InVision Broadcast, are designed for discreet, low-profile on-camera use in broadcast studio environments where windshielding is not required.
The InVision Broadcast mounts feature Rycote’s latest Lyre suspension systems to offer broadcast professionals the cleanest possible sound, free from unwanted cable or stand-borne noise. They may be used with microphones mounted on desks, stands or boom poles, or suspended mics.
Tech Specs
Fitted with:
2 x 19-25mm universal clips, with Universal 82 Lyre (70mm wide)
Standard bar with 25mm (1″) centres
Maximum microphone length 120mm
An InVision set contains two Lyre, an appropriate length mounting bar, and in some cases, a reducing sleeve (InVision INV-4). The Lyre suspension webs of our InVision come in two sizes: – InVision Lyre width: 43 mm – Standard Lyre width: 70 mm Mounting bars come in two sizes: – Standard length: 25 mm – Large length: 70 mm The reducing sleeve allows for smaller microphones (e.g. Schoeps CCM series) to be held by the Lyre.
MyMic – https://mymic.rycote.com/products/invision-inv-6-heavy/
Rycote Neumann Tlm 103 Miniwindjammer
Neumann TLM 103 MiniWIndjammer
Product Code: 055456
Main Benefits:
The Mini Windjammer suitable for the Neumann TLM 103 provides excellent wind isolation for capturing audio in high-wind environments. Made from high-quality synthetic fur specifically designed for wind isolation, easy-to-fit slip-on fur covers for use when recording outside with the built-in microphones found on portable cameras, external camera mics and handheld reporter microphones.
Some of our Mini Windjammers have 10 mm fur, while others have 25 mm Softie fur for use in more unsettled conditions, and can be fitted to a wide variety of devices.
Note: This Mini Windjammer is specifically designed for the Neumann TLM 103.
Compatibility – https://mymic.rycote.com/products/neumann-tlm-103-miniwindjammer/#compatibility
MyMic – https://mymic.rycote.com/products/neumann-tlm-103-miniwindjammer/
Rycote Nano-Shield Windjammer Nw0-Aa
Nano-Shield Windjammer NW0-AA
Designed for a Nano Shield NSO-AA
Main Benefits:
The Windjammer was first introduced by Rycote is a high quality synthetic fur-cover, which provides the highest possible protection against extreme wind-noise. When using a Windjammer fitted over a Windshield up to 50 dB of wind-noise attenuation can be achieved, producing excellent standard audio recordings.
Each Nano-Shield Windjammer fits one specific sized Nano-Shield.
The Windjammer is made from materials which are specially designed and manufactured for the purpose, and as a result has virtually no adverse effect on High-Frequency.