Wooden Camera D-Tap to Sony FX6 / FX9
Converts battery voltage to 19.5v. Purpose built for the Sony FX9. Purpose built for the Sony FX6.
$224.00
D-tap to Sony FX6, FX9 allows you to power the camera using any V-Mount or Gold Mount battery with a D-Tap plug. The cable regulates power from the D-Tap to the proper 19.5V required by the camera.Cable length: 20 inches (508mm)Specifications:Weight: 90.72 g (0.2 lbs)Dimensions: 571.5 x 34.8 x 19 mm (22.5 x 1.37 x .75 in)
Related products
-
Battery adapters and DC couplers
Tether Tools Case Relay Camera Power System
- Continually power your camera with USB battery packs
- Hot swap batteries mid-shooting with no downtime
- No need to purchase multiple camera batteries
- Compatible with most camera brands
- Can be adapted to work with D-Tap batteries; use D-Tap to USB Converter
- More cost effective than purchasing multiple proprietary camera batteries
- Power sources are non-proprietary. Power your camera with the same 5V battery you use to charge phones or tablets.
- Never need to charge camera batteries again. And never run out power.
- A Relay Camera Coupler (sold separately) is required to use Case Relay External Power System.
SKU: TET-30.CRUPS110 -
Battery adapters and DC couplers
Dynacore D-C Multi-Voltage Splitter V-Lock for camera rigs
Dynacore D-C Voltage splitter allows for connection of Multiple devices requiring different voltages on a camera rig.Multi-output adapter designed for DSLR cameras and accessories.
Output Voltage: 5V/7.2V/12V/15V(11V to 17V).
Built-in HDMI distributor, one standard signal input and two standard signal output.
V-Mount ENG batteries are required for the power.SKU: DYN-D-C Mount(With out HDMI) -
Battery adapters and DC couplers
Dynacore D-2BS-24 Converter V-Lock 14.8V input to 24V output
D-2BS/A-24 is a power station designed to utilise two 14.4 volt V-Lock batteries creating a power source outputing power for any device needing 24Volts, such as an LED panel.
It can supply up to 240Watt output (24V, 10A).
Designed to work with equal power batteries where a larger capacity is preferredLCD Display indicates Output Voltage
The unit has a Low Voltage Indicator LED to warn of potential problems shown here:
Color Red=Under/Over Voltage
Color Green=Good
Green Blinking=Battery LowOutput is via 3 Pin Female XLR Output
24V, 10A, 240W(Max)A Hexagon connector can be mounted to a stand using a super clamp or convi clamp.
SKU: DYN-D-2BS-24 -
Battery adapters and DC couplers
Dynacore D-TS Hot-Swap Adapter V-Lock
Dynacore D-TS Hot Swap system.
The D-TS is a Universal Hot-Swap battery mount, it allows the user to hot-swap a fresh battery while still operating equipment, so you can remove the depleted battery while the leaving the other battery connected so that there is no downtime.
Utilising the V-Lock mounting system, it can be attached to any portable device with an existing battery bracket.SKU: DYN-D-TS -
