Tilta Armor man 3.0 Waterproof Safety Case
Protect and store your Armor Man 3.0 with this travel-sized waterproof rolling safety case. Custom foam cutouts tightly pack your vest and two shock-absorbing stabilized arms into the case for maximum protection and portability.
$499.00
Related products
-
Stabilisers
Tilta Armor man 3.0 Overhead Configuration Gimbal Ring Adapter Clamp(Pair)
0 out of 5(0)If you have a ring-based gimbal, the Overhead Configuration Gimbal Ring Adapter Clamps allow for an easy quick release solution to attach and detach your gimbal to the Armor Man 3.0’s mechanical arms when in the overhead operating mode. The clamps attach to the left and right sides of the top of the gimbal ring and then after the Overhead Configuration Cable Pulleys are attached to each of the Armor Man’s arms, the operator can simply use the carabiners of the extendable bungee cables to attach to the gimbal to then start operating. When you want to detach the gimbal, simply release the carabiners off of the clamps.
SKU: TIL-ARM-T03-ORAC -
Stabilisers
Tilta Armor man 3.0 Support Cup(pair)
0 out of 5(0)If you have a top bar-based gimbal, the Armor Man 3.0 Support Cups allow for an easy solution to attach and detach your gimbal to the Armor Man 3.0’s mechanical arms while they are in the lower operating position. When you want to attach the Armor Man to the gimbal, simply fit the side arms of the gimbal into the support cups and then re-grab the arms like normal to start operating. When you want to stop operating, simply dock the gimbal, grab onto the support cups and detach them from the handles.
SKU: TIL-ARM-T03-SC -
Stabilisers
Tilta Armor man 3.0 Overhead Configuration Cable Pulley
0 out of 5(0)This pulley attachment slides onto the Armorman 3.0’s mechanical arms when using the overhead configuration. It allows you to attach an extendable bungee cable to each arm so that you can grab onto and provide support for your gimbal from over the top of your camera setup.
SKU: TIL-ARM-T03-OCP -
Stabilisers
Cinekinetic Fasty Straps
0 out of 5(0)5′ long polyester seat belt webbing Cinesaddle Fasty Straps are designed to work with the Cinesaddle Stirrups or Anchors to secure your Cinesaddle to a moving or stationary platform. The Fasty Straps feature a buckle that allows you to secure the strap from loosening once you have cinched it tight.
You loop the Fasty strap around a Stirrup (not included) and put it under tension. Or when working with a Cinesaddle Anchor (not included), you can thread the end of the Anchor through the Fasty Strap’s buckle to hold it fast.
SKU: CKN-FASTYSTRAPS -
Stabilisers
Tilta Armor man 3.0 Arm (L)
0 out of 5(0)This shock-absorbing stabilized left arm for the Armor Man 3.0 attaches to the back of the Armor Man 3.0 vest when in the normal operating mode and can also be attached to the top of the vest when operating in the overhead configuration. When engaged, the arm has two adjustable tension knobs to allow you to adjust for the weight of your gimbal/camera rig as well as your preferred operating style (whether you want the arms bowed out away from your body or tight and compact to your body).
You can attach a variety of gimbal supports to the end of the arm to allow you to use the Armorman with any kind of 3-axis gimbal, whether a top bar-based gimbal, a ring-based gimbal, or even if you want to use the Nucleus-M handles on your gimbal. Each of these supports attach to the arm on a sliding dovetail-based system so that you can adjust them for maximum comfort based on your operating preferences.
SKU: TIL-ARM-T03-A-L