Tilta Armor man 3.0 Universal Gimbal Ring Adapter Clamp(Pair)
If you have a ring-based gimbal, the Universal Gimbal Ring Adapter Clamps allow for an easy quick release solution to attach and detach your gimbal to the Armor Man 3.0’s mechanical arms when in the normal operating mode. The clamps attach to each side of the gimbal ring and then after the adapters are attached to each of the Armor Man’s arms, the operator can simply connect the arms to the clamps on the gimbal to start operating. When you want to detach the gimbal, push in the adapters’ quick release buttons to slide off of the clamps.
$70.95
Related products
-
Stabilisers
Manfrotto MVAQR MOVE Quick release system
MOVE is the first quick-release system to help increase your pace on set and make switching set-ups effortless.
It is designed to reduce downtime when switching between tripods, motion control gear, and stabilizers in fast paced, creative environments.
At the core of this revolutionary system is a flat base and plate set-up that creates a universal connector.
The flat base has a diameter of 60mm and mounts a standard 3/8” thread that is highly versatile, working with different support combinations (tripod, slider, monopods etc.).
The plate comes with a standard 3/8” and 1/4” top attachment screw to guarantee an easy connection with a huge range of products. It also features an anti-rotation pin to work safely and securely in all shooting configurations, and a 1/4” adapter seat.
By adding the bases to the various supports, and the plate to the camera systems, users can quickly switch their gear from one set-up to the next without having to stop to screw and unscrew different plates into position.MOVE is made of hard-anodized, machined aluminium, so it’s strong enough to cope with an impressive payload capacity of up to 20kg/44.09 lbs. With its slimline design and 220gr/0.49 lbs weight, it’s also the lightest quick release system on the market.
Manfrotto’s new X LOCK system increases the rigidity of the entire kit at the mounting point through its intuitive twist locking mechanism.
MOVE is not a simple universal connector, but an innovative product for everyone looking to improve their performance and creative range while also improving on-set or shoot efficiency.
SKU: MAN-MVAQR -
Stabilisers
Manfrotto MVG220 Professional 3-Axis Gimbal up to 2.2kg
The Manfrotto MVG220 is a Professional 3-Axis Stabilized Handheld Gimbal designed for mirrorless and DSLR cameras*. Designed for dynamic shooting, it can support up to 2.2 kg making it a perfect choice for photographers, videographers, vloggers and bloggers looking for a versatile device with various modes for supreme flexibility.
The Gimbal comes with a LCD touch screen that allows you to easily switch working mode and control the rotation and parameters with one hand. This includes control photo/video capture, focus, zoom, sensitivity adjustment, white balance, and exposure value*.
Modes include:
• Inception mode
• Portrait mode (for TikTok)
• Selfie mode
• Time-lapseTo control your device, adjust settings and perform various functions remotely, you can also download and use the Manfrotto Gimbal App.
To prevent shaking, the motor is equipped with independent locking for each axis.
It also features a unique quick installation system, designed with a secondary structure and compatible with the Manfrotto and the ARCA Swiss Type standard, which allows photographers to quickly change equipment.After levelling the camera, the camera can be quickly removed and installed without the need to level again.
The kit included also features a detachable, versatile arm that switches between a single handle and an underslung position to capture even the most extreme shooting angles.
This Manfrotto Gimbal can support up to 2.2 kg .*Please check the camera compatibility chart in the Downloads section.
SKU: MAN-MVG220 -
Stabilisers
Tilta Armor man 3.0 Support Cup(pair)
If you have a top bar-based gimbal, the Armor Man 3.0 Support Cups allow for an easy solution to attach and detach your gimbal to the Armor Man 3.0’s mechanical arms while they are in the lower operating position. When you want to attach the Armor Man to the gimbal, simply fit the side arms of the gimbal into the support cups and then re-grab the arms like normal to start operating. When you want to stop operating, simply dock the gimbal, grab onto the support cups and detach them from the handles.
SKU: TIL-ARM-T03-SC -
Stabilisers
Tilta Armor man 3.0 Arm (R)
This shock-absorbing stabilized right arm for the Armor Man 3.0 attaches to the back of the Armor Man 3.0 vest when in the normal operating mode and can also be attached to the top of the vest when operating in the overhead configuration. When engaged, the arm has two adjustable tension knobs to allow you to adjust for the weight of your gimbal/camera rig as well as your preferred operating style (whether you want the arms bowed out away from your body or tight and compact to your body).
You can attach a variety of gimbal supports to the end of the arm to allow you to use the Armorman with any kind of 3-axis gimbal, whether a top bar-based gimbal, a ring-based gimbal, or even if you want to use the Nucleus-M handles on your gimbal. Each of these supports attach to the arm on a sliding dovetail-based system so that you can adjust them for maximum comfort based on your operating preferences.
SKU: TIL-ARM-T03-A-R -
Stabilisers
Manfrotto MVGEXT Extension in carbon fibre for Manfrotto Gimbals
The Carbon Fiber extension is a 257mm/10 inches pole that can be attached to the base of your gimbal.
It is a compact, portable and lightweight accessory that improves your shooting experience, increasing flexibility and versatility. Quick and easy to attach, it allows you to explore a wider range of perspectives and creative angles.
It is compatible with most of the gimbals available on the market, thanks to ¼-inch threaded studs and threaded holes on the top and bottom of the handle.SKU: MAN-MVGEXT
