-
×
Bauhaus Photo Satin High White 44" 1120 x 30m
1 × $352.00 -
×
Canson Edition Etching Rag 310gsm A3 25 Pack
1 × $106.00
Subtotal: $458.00
Data and DMX distribution
TecArt Merger Rack Mount DMX 2 in 8 out
The TecArt Merger is a 19” rack mount unit with 2 into 1 merging.
The DMX512 Merger combines data from two separate DMX512 inputs and provides a single merged data output on a HTP (Highest-Takes-Precedence) basis.
The unit can also have the merged output split across 8 opto-isolated outputs with separate drivers and power supplies.
The units are available with a choice of 3 or 5 pin connectors.
Related products
-
Data and DMX distribution
TecArt ArtNode 1 – 1 Universe
The ArtNode 1 is a Wi-Fi ArtNet to dual-purpose DMX node for architectural and entertainment lighting control applications.
FEATURES
• Multi mode: ArtNet to DMX, DMX to ArtNet.
• External power supply 9-24VDC (supplied separately).
• Robust housing.
• 2 main indication LEDs.SPECIFICATIONS
• Input Voltage: 9–24VDC.
• Power: 6VA (at 24VDC).
• Dimensions (mm): 117 L x 115 W x 53 H.
• Mounting Options: Desk-mount.
• DMX Input/Output: 5-pin XLR.
• Operating Temperature: 0 – +40°C.SKU: n/a -
Data and DMX distribution
TecArt Splitter DIN Rail RDM 4 way
The TecArt range of data splitters are available as DIN Rail mountable units.
Each output has a separate driver and opto-isolator to ensure the highest possible level of protection.
The unit is available as a standard DMX splitter or with the option of RDM.
RDM compliant device “ANSI/ESTA E1.20 Entertainment Technology – Remote Device Management over USITT DMX512”.
RDM or Remote Device Management is a protocol enhancement to DMX512 that allows Bi-directional communications between light fixtures and lighting consoles or RDM specific software over a standard DMX line.
DMXS4DR can be supplied with an external 12 – 48VDC power supply.
FEATURES
• DMX-512 In/Out/Thru.
• External Power Supply 12 – 48VDC.
• Terminal Strip Output and Input Connector.
• 2 Main indication LEDs.SPECIFICATIONS
• Input voltage: 12 – 48VDC.
• Power supply: External.
• Total power: 6W @ 24VDC.
• Dimension: 105mm (L) 85mm (W) 60mm (H).
• Mounting method: DIN Rail.
• DMX signal input: Terminal block.
• DMX signal output: Terminal block.
• Outputs: 4 Opto isolated.
• Temperature: 0 – 40 degree Celsius.SKU: n/a -
Data and DMX distribution
Chauvet DJ DMX-RT4 DMX Recorder
- DMX recording and playback device with 4 independent triggers
- Each trigger can be programmed and triggered separately
- Copy, backup and transfer show files using the USB-C connector
- Standard headphone connector (3.5mm) connects to external audio systems for amplified playback
- Password protection ensures shows will not be altered
- Normally Open (N/O) or Normally Closed (N/C) triggers allow the use of most common sensors
- Supplies DC voltage through terminal block to power specific triggers
SKU: CDJ-DMX-RT4 -
Data and DMX distribution
Chauvet DJ DMX-AN2 ArtNET DMX Node
Chauvet DJ DMX-AN2
The Chauvet DJ DMX-AN2 is a multi-purpose Art-Net/sACN node that converts 1 Ethernet cable to 2 DMX universes. Its optical and electrical isolation is ready for any situation and the durable Neutrik® etherCON® in/through port ensures reliability. The built-in web-based GUI means no universe/subnet setup. DMX-AN2 automatically redirects the web page if the IP address is changed. The unit supports Power over Ethernet (POE) or an external power supply. Both outputs can be set to either Art-Net or sACN and DMX-AN2 functions as an Art-Net to DMX or DMX to Art-Net interface. Onboard LED indicators quickly inform status and the integrated mounting bracket is included to quickly install into any location.SKU: CDJ-DMXAN2 -
Data and DMX distribution
TecArt Splitter Rack Mount DMX 8 way
The TecArt range of data splitters are available as 19” rack mount units.
The units are available with a choice of 3 or 5 pin connectors. Each output has a separate driver, opto-isolator and power supply to ensure the highest possible level of protection.
SKU: n/a
