SmallRig Wrist Support for DJI RS Series 4248 secures the bottom of DJI RS 4 / RS 4 Pro / RS 3 / RS 3 Pro / RS 2 via one 1/4″-20 screw and features an ergonomic soft silicone support pad to facilitate shooting. With the rotating crankset, you can adjust the height of the wrist support tool-free. Easy to use with stabilizers of different heights. Suitable for people with different palm sizes. There are 1/4″-20 and 3/8″-16 threaded holes for tripods or other devices as well as two QD holes for Shoulder Straps 4118 / 4383.
SmallRig Wrist Support for DJI RS Series 4248
- Compatible with DJI RS 4 / RS 4 Pro / RS 3 / RS 3 Pro / RS 2, installed on the bottom of the stabilizer via 1/4″-20 screws.
- Ergonomic silicone support pad facilitates gimbal shooting.
- The rotating crankset helps adjust the height as needed; suitable for wrists of different sizes.
$61.90
Related products
-
Stabilisers
Tilta Armor man 3.0 Overhead Configuration Cable Pulley
0 out of 5(0)This pulley attachment slides onto the Armorman 3.0’s mechanical arms when using the overhead configuration. It allows you to attach an extendable bungee cable to each arm so that you can grab onto and provide support for your gimbal from over the top of your camera setup.
SKU: TIL-ARM-T03-OCP -
Stabilisers
Cinekinetic Fasty Straps
0 out of 5(0)5′ long polyester seat belt webbing Cinesaddle Fasty Straps are designed to work with the Cinesaddle Stirrups or Anchors to secure your Cinesaddle to a moving or stationary platform. The Fasty Straps feature a buckle that allows you to secure the strap from loosening once you have cinched it tight.
You loop the Fasty strap around a Stirrup (not included) and put it under tension. Or when working with a Cinesaddle Anchor (not included), you can thread the end of the Anchor through the Fasty Strap’s buckle to hold it fast.
SKU: CKN-FASTYSTRAPS -
Stabilisers
Manfrotto MVGBF-CF Fast GimBoom Carbon Fibre
0 out of 5(0)GimBoom is the revolutionary new FAST boom developed by Manfrotto with universal fitting for your Gimbal.
From ground level to overhead position (drone perspective), the new Manfrotto GimBoom allows you to get more versatile and flexible use from your Gimbal, raising your production values to the next level.
Thanks to its standard 3/8” and 1/4” top attachment screw, the GimBoom guarantees an easy connection with your Gimbal. It’s exceptionally compact (hand baggage size with 51cm minimum operating height) and lightweight (800g.) And, thanks to its carbon-fibre construction – capable of taking a payload of 6.5 kg at maximum extension – the GimBoom is also incredibly strong.
The unique FAST Twisting Lock makes it quick and simple to deploy and extend, allowing the user to control the entire boom with a single gesture. With two risers and three telescopic sections, the full extended length is more than double (1.15m/45.27in) the minimum operating length (0.51m/20.07in), while the intuitive graphic design means locking and unlocking the boom have never been easier.
Three thread connectors arranged at 120° on the top of the middle section enable the GimBoom to pair with dedicated GimBoom accessories, with a handy rubber cap to avoid damage when placing it on the ground.
SKU: MAN-MVGBF-CF -
Stabilisers
Manfrotto MVGBF-CFSSKIT Gim-Pod accessory
0 out of 5(0)Gim-Pod is specifically designed for the revolutionary Gimboom, the fast boom by Manfrotto, allowing users to instantly switch from a Gimboom to a tripod, creating the ultimate lightweight travel kit for dynamic users.
It’s dedicated to everyone who needs a multi-application photo and video solution in one piece of equipment, allowing you to shift from a boom to a tripod in a few seconds.
The Gim-Pod accessory includes a universal 3/8” thread connector for adding external accessories such as monitors or audio equipment to a Gim-Pod, and dependable, three-section aluminium legs made from anodized and CNC-machined aluminium for greater durability and a compact size. It can take a payload of up to 6.5kg/143.3lbs, and thanks to a dedicated knob, the one-hand attachment is easy to use, even when the stabilizer is mounted
With its twist-locking legs system and slimline design (only 7cm/2.76in), the Gim-Pod’s closed down length doesn’t exceed the Gimboom’s, making it super easy to store and carry with you anywhere you want to go.
This is a really fast solution that enables users to switch from a moving usage to static tripod-based shooting, allowing you to remotely control your Gimbal or mount a photographic head without having to detach the camera rig.
SKU: MAN-MVGBF-CFSSKIT -
Stabilisers
Tilta Armor man 3.0 Overhead Configuration Gimbal Ring Adapter Clamp(Pair)
0 out of 5(0)If you have a ring-based gimbal, the Overhead Configuration Gimbal Ring Adapter Clamps allow for an easy quick release solution to attach and detach your gimbal to the Armor Man 3.0’s mechanical arms when in the overhead operating mode. The clamps attach to the left and right sides of the top of the gimbal ring and then after the Overhead Configuration Cable Pulleys are attached to each of the Armor Man’s arms, the operator can simply use the carabiners of the extendable bungee cables to attach to the gimbal to then start operating. When you want to detach the gimbal, simply release the carabiners off of the clamps.
SKU: TIL-ARM-T03-ORAC