SmallRig Snap-on Quick Lock NATO Top Handle 4175B
- Snap-on standard NATO clamp locks within one second, faster and safer.
- An 80mm forward-to-back adjustment helps balance the camera rig for more stability.
- Multiple accessory mounts for use in various scenarios, such as 1/4″-20 threaded hole, 1/4″-20 locating hole, ARRI 3/8″ -16 locating hole, and cold shoe mount.
- Built-in magnetic Allen Wrench for easy mounting and release.
- Comes with NATO Rail (length: 50.0mm / 2.0in).
$99.90
SmallRig Snap-on Quick Lock NATO Top Handle 4175B is designed to help camera movement, stabilize low-angle shots, and carry the camera rig around while providing a variety of accessory mounts. Compatible with standard NATO rail, the handle snaps on or releases a NATO rail within one second without first removing other accessories, saving shooting time. It can be further tightened by a wrench. The 134mm long handle leaves enough room for grip even after installing accessories; 80mm forward-to-back adjustment provides a balanced gripping point for your camera. The item also features such accessory mounts as a 1/4″-20 threaded hole, 1/4″-20 locating hole, ARRI 3/8″ -16 locating hole, cold shoe mount that supports Monitor Mount 2905, 2903, Ball Head Magic Arm 3875, LED video light, microphone, etc. Besides, a built-in magnetic Allen Wrench is included for easy accessory mounting and release. Comes with NATO Rail(50.0mm / 2.0in), which can be installed in 9mm or 18mm spacing through two 1/4″-20 screws.
Related products
-
-
Camera rig attachments, brackets and components
Wooden Camera Top Plate (Sony FX9)
Top plate specifically for the Sony FX9. Arrays of various mounting points. Can be used with original Sony handle. Sony XDCA-FX9 Extension Unit can also be attached to the rear of the camera without obstruction.
SKU: WOO-54.275100 -
Camera rig attachments, brackets and components
Manfrotto Rods 300mm for Camera Cage Fits MVCCS, MVCCM, MVCCL paired with MVCCBP
Camera rig attachments, brackets and componentsManfrotto Rods 300mm for Camera Cage Fits MVCCS, MVCCM, MVCCL paired with MVCCBP
These 300mm (11.8”) long Rods are one of the basic building blocks of all SYMPLA rigs, and are always used in parallel pairs to create a track which allows components to be mounted and positioned correctly.
Rods can be united to make longer tracks (using the included screw junctions), joined at different heights using the V-Offset component, or shifted laterally using the H-Offset component. Although the possible uses are numerous, these long Rods primarily serve as the track for SYMPLA Fixed or Variable Plates, since the extra length allows a wide range of camera and lens (and viewfinder) combinations to be correctly positioned for the operator and for other SYMPLA components, such as the Flexible Mattebox.
Made in 15mm (0.59”) diameter tubular aluminum for strength and reduced weight, 300mm Rods are the longer of SYMPLA’s two sizes. Supplied as a pair, with two 1/2”-13UNC screw junctions included.
SKU: MAN-MVA520W
