SmallRig 4” Suction Cup Camera Mounting Support for Vehicle Shooting 4122B
- Powerful suction force that lasts 24 hours; load capacity of 50 kg.
- Multiple accessory mounting points, including 1/4″-20 threaded holes and ARRI 3/8″-16 locating holes.
$89.90
SmallRig 4” Suction Cup Camera Mounting Support for Vehicle Shooting 4122B consists of a suction cup mount, sucker, hand pump and dust cover. The suction cup camera mount, made mostly of robust and wear-resistant NBR, can work at -40degC to 60degC. It is not easily deformed and features great airtightness, suitable for clean, dry, and smooth surfaces. With powerful suction force, it has a maximum horizontal suction of 50 kg and a maximum vertical suction of 35 kg. The aluminum-alloy suction cup camera mount comes with such accessory mounting points as 1/4″-20 threaded holes, 3/8″-16 threaded holes, and ARRI 3/8″-16 locating holes for attaching 3757B, 3873, 3874, 3875, 2906B, 2070B, 2115C, etc. It is manually pumped and locked, with a safety-line indicator to ensure safety and reliability. When not in use, put on the dust cover to prevent dust for a longer service life.
Related products
-
Camera rig attachments, brackets and components
SmallRig 3206 Sunhood for Sony Alpha 7S III/Alpha 7C/ZV-1/FX3 Camera
Camera rig attachments, brackets and componentsSmallRig 3206 Sunhood for Sony Alpha 7S III/Alpha 7C/ZV-1/FX3 Camera
1. Dedicated Shading Hood for Sony Alpha 7 IV / A7S III / A7C / ZV-E1 / ZV-E10 / ZV-1F / ZV-1 II / ZV-1 / FX3.
2. Reduces reflections during shooting and shades the screen.
3. Slide-in mounting, fastened by hook & loop.
4. Raised internal edges for stability and to prevent twists.
5. Folded flat for transport and storage.SKU: SRI-3206 -
Camera rig attachments, brackets and components
Wooden Camera Top Plate (Sony FX9)
Top plate specifically for the Sony FX9. Arrays of various mounting points. Can be used with original Sony handle. Sony XDCA-FX9 Extension Unit can also be attached to the rear of the camera without obstruction.
SKU: WOO-54.275100 -
-
Camera rig attachments, brackets and components
Manfrotto Rods 300mm for Camera Cage Fits MVCCS, MVCCM, MVCCL paired with MVCCBP
Camera rig attachments, brackets and componentsManfrotto Rods 300mm for Camera Cage Fits MVCCS, MVCCM, MVCCL paired with MVCCBP
These 300mm (11.8”) long Rods are one of the basic building blocks of all SYMPLA rigs, and are always used in parallel pairs to create a track which allows components to be mounted and positioned correctly.
Rods can be united to make longer tracks (using the included screw junctions), joined at different heights using the V-Offset component, or shifted laterally using the H-Offset component. Although the possible uses are numerous, these long Rods primarily serve as the track for SYMPLA Fixed or Variable Plates, since the extra length allows a wide range of camera and lens (and viewfinder) combinations to be correctly positioned for the operator and for other SYMPLA components, such as the Flexible Mattebox.
Made in 15mm (0.59”) diameter tubular aluminum for strength and reduced weight, 300mm Rods are the longer of SYMPLA’s two sizes. Supplied as a pair, with two 1/2”-13UNC screw junctions included.
SKU: MAN-MVA520W
