SmallHD 14V/26V Dual V-Mount Battery Bracket
This smart battery bracket slides right down the Arca Swiss SmartRail on the back of your 4K monitor and plugs directly in for power (no cable required). Both 14v and 26v batteries are supported and this plate allows for hot-swapping between the two battery plates AND between the plate and the 3-pin XLR power port on the monitor itself. Both Gold-Mount and V-Mount options are available. Can send battery data to monitor.
$695.00
Related products
-
Battery adapters and DC couplers
Tether Tools Case Relay Camera Power System
- Continually power your camera with USB battery packs
- Hot swap batteries mid-shooting with no downtime
- No need to purchase multiple camera batteries
- Compatible with most camera brands
- Can be adapted to work with D-Tap batteries; use D-Tap to USB Converter
- More cost effective than purchasing multiple proprietary camera batteries
- Power sources are non-proprietary. Power your camera with the same 5V battery you use to charge phones or tablets.
- Never need to charge camera batteries again. And never run out power.
- A Relay Camera Coupler (sold separately) is required to use Case Relay External Power System.
SKU: TET-30.CRUPS110 -
Battery adapters and DC couplers
Nanlite BH-FZ60V Battery handle V-Mount
Achieve long runtimes by powering the Forza 60 with a V-mount battery.
The Nanlite BH-FZ60V allows you to run a Forza 60 or Forza 60B from a V-Mount battery. The BH-FZ60V battery handle includes a 5.5mm DC-out cable to connect to the DC-in port on the Nanlite Forza 60 or Forza 60B, and a V-Mount buckle to mount the battery.
The Nanlite BH-FZ60V V-mount battery adaptor can be mounted on a light stand, and also includes a handle to enable the Forza 60 to be operated hand-held, ideal for run and gun filmmaking.
The Nanlite Forza 60 V-Mount battery handle is only compatible with 14.8V V-Mount batteries.
Forza 60 runtime from a 100Wh V-Mount battery is approximately 100 minutes.
SKU: NAN-NNBHFZ60V -
Battery adapters and DC couplers
Nanlite BH-FZ60 Battery handle NPF
A handheld grip, battery buckle, and low mount stand all-in-one.
This clever Nanlite battery mount holds two Sony NP-F (L series) batteries to power the Nanlite Forza 60. The battery handle also doubles as a low-mount light stand.
The BH-FZ60 handle also makes it easy to handhold the Foza 60 for lighting moving subjects, for light painting, and for creating a ‘wash of light’ effect in your video.
The battery handle grip can be mounted on a light stand when you wish to power your Nanlite Forza 60 from NP-F batteries.
The BH-FZ60 battery handle includes a 5.5mm DC-out cable to connect to the DC-in port on the Nanlite Forza 60 or Forza 60B.
SKU: NAN-NNBHFZ60 -
Battery adapters and DC couplers
Tether Tools Case Relay Camera Coupler CRN5B for Nikon
- More cost effective than purchasing multiple proprietary camera batteries
- Power sources are non-proprietary. Power your camera with the same 5V battery you use to charge phones or tablets.
- Never need to charge camera batteries again. And never run out power.
- Compatible with most Canon, Nikon, Sony, Panasonic, Fujifilm, and Olympus cameras. Check to confirm your camera model is supported.
- A Case Relay Camera Power System (sold separately) is required to use the Relay Camera Coupler.
SKU: TET-30.CRN5B -
Battery adapters and DC couplers
Dynacore D-2BS-24 Converter V-Lock 14.8V input to 24V output
D-2BS/A-24 is a power station designed to utilise two 14.4 volt V-Lock batteries creating a power source outputing power for any device needing 24Volts, such as an LED panel.
It can supply up to 240Watt output (24V, 10A).
Designed to work with equal power batteries where a larger capacity is preferredLCD Display indicates Output Voltage
The unit has a Low Voltage Indicator LED to warn of potential problems shown here:
Color Red=Under/Over Voltage
Color Green=Good
Green Blinking=Battery LowOutput is via 3 Pin Female XLR Output
24V, 10A, 240W(Max)A Hexagon connector can be mounted to a stand using a super clamp or convi clamp.
SKU: DYN-D-2BS-24
