Rycote Windjammer WJ 2
Available on back-order
Windjammer WJ 2
Product Code: 021502
Suitable for use with the Windshield 2
Main Benefits:
- Specially designed for the purpose – our Windjammer® give the most effective wind-noise protection available
- Secure and snug fitting, using a draw-string and toggle
- First introduced and invented by Rycote in 1987, we are the original makers of first-class Windjammer
The Windjammer first introduced by Rycote is a high quality synthetic fur-cover, which provides the highest possible protection against extreme wind-noise. When using a Windjammer fitted over a Windshield up to 50 dB of wind-noise attenuation can be achieved, producing excellent standard audio recordings.
Each Windjammer fits one size of windshield, and comes supplied in every Modular Windshield Kit. Windjammer is also available in sizes to fit Stereo Windshields, Softies & Baby Ballgags, please see their relevant product family for details.
The Windjammer is made from materials which are specially designed and manufactured for the purpose, and as a result has virtually no adverse effect on High-Frequency. To be totally effective it is important that the pile of the Windjammer remains in prime condition, so each is supplied with a fold flat hairbrush for ongoing maintenance. Click here for care instructions.
Standard Windjammer is fitted with a drawstring and toggle to allow snug and easy fitting, however some users prefer the zipped version which are available on request.
Tech Specs
Designed to fit the Modular Windshield 2 (010602).
Windjammer length: 380mm
Windjammer height: 125
Net Weight: 0.12 kg
Gross Weight: 0.18 kg
Fur colour: Grey
Fur length: 40mm
Maximum wind-noise attenuation: 50dB with Modular Windshield
Finding the correct Windjammer will depend on your Windshield. Each Windjammer is designed to fit over it’s corresponding Windshield, for example a Windjammer 1 will fit over a Windshield 1 etc.
Compatibility – https://mymic.rycote.com/products/windjammer-wj-2/#compatibility
$272.00
Available on back-order
Related products
-
Microphone Accessories
Rycote Neumann Tlm 103 Foam (Single)
Neumann TLM 103 Foam
Product Code: 104423
Foam Windshield for Neumann TLM 103
Main Benefits:
- Up to 10 dB wind and pop noise attenuation with minimal high-frequency loss from this discreet, slip-on windshield
- Excellent resistance to moisture and UV light from the durable, high quality open-cell acoustic foam
The Large Diaphragm Mic Foam is a discreet, slip-on foam windshield, designed to protect large-diaphragm shotgun microphones against light wind and pop noise. Made of durable, high quality open-cell acoustic foam, our foam windshields offer up to 20 dB wind noise attenuation, whilst keeping high frequency loss to a minimum.
Engineered exclusively for Rycote, this high quality foam also provides excellent resistance against the damaging effects of moisture and UV light.
Compatibility – https://mymic.rycote.com/products/neumann-tlm-103-foam/#compatibility
MyMic – https://mymic.rycote.com/products/neumann-tlm-103-foam/
SKU: RYC-RY104423 -
-
Microphone Accessories
Rycote Single Square White Mic Flag
Square White Mic Flag
Product Code: 107307
A four-sided, white, square, mic flag, suitable for microphones with 19 to 38 mm diameters.
Main Benefits:
- Fits A Wide Range Of Microphones
- Lightweight But Tough
Rycote’s Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber ‘vanes’ secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.
Customising your mic flag in Australia & New Zealand
We suggest that you have your custom designs & logos printed on high-quality, hard-wearing, UV-resistant vinyl stickers, this helps to reduce glare and to be fixed directly onto the flag. Each square flag requires a minimum of four stickers, opposed to the triangular flags that require three stickers per flag. It’s also a good idea to get a few additional stickers printed at the same time.
Typically, we suggest for a quick and effective method of printing, you contact your printing company directly with the details above, that said if the stickers are required urgently most (just-in-time) franchised printing companies across Australia can assist with quick printing solutions. As always, please feel free to reach out if you have any further questions.
Fits A Wide Range Of Microphones
With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag.
Lightweight But Tough
Lightweight and extremely hard-wearing, Rycote’s Mic Flags provide a large printable area for sponsors’ logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm.
MIC FLAG BROCHURE – CLICK HERE
Compatibility – https://www.mymic.rycote.com/products/square-white-mic-flag/#compatibility
MyMic – https://www.mymic.rycote.com/products/square-white-mic-flag/
SKU: RYC-RY107307 -
Microphone Accessories
Rycote Triangular Black Mic Flag
Triangular Black Mic Flag
Product Code: 107302
A three-sided, black, triangular mic flag, suitable for microphone with 19 to 38 mm diameters.
Main Benefits:
- Fits A Wide Range Of Microphones
- Lightweight But Tough
Rycote’s Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber ‘vanes’ secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.
Customising your mic flag in Australia & New Zealand
We suggest that you have your custom designs & logos printed on high-quality, hard-wearing, UV-resistant vinyl stickers, this helps to reduce glare and to be fixed directly onto the flag. Each triangular flag requires a minimum of three stickers, opposed to the square flags that require four stickers per flag. It’s also a good idea to get a few additional stickers printed at the same time.
Typically, we suggest for a quick and effective method of printing, you contact your printing company directly with the details above, that said if the stickers are required urgently most (just-in-time) franchised printing companies across Australia can assist with quick printing solutions. As always, please feel free to reach out if you have any further questions.
Fits A Wide Range Of Microphones
With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag.
Lightweight But Tough
Lightweight and extremely hard-wearing, Rycote’s Mic Flags provide a large printable area for sponsors’ logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm.
MIC FLAG BROCHURE – CLICK HERE
Compatibility – https://www.mymic.rycote.com/products/triangular-black-mic-flag/#compatibility
MyMic – https://www.mymic.rycote.com/products/triangular-black-mic-flag/
SKU: RYC-RY107302
