Rycote Stereo Windshield Ws Ae Ortf Kit (Mzl)
Available on back-order
Stereo Windshield WS AE ORTF Kit (MZL)
Product Code: 080211
Stereo Windshield WS AE ORTF Kit (MZL) is suitable for ORTF configuration with compact condenser microphones including a Sennheiser MKH8000 series pair. (MZL Connbox included)
Main Benefits:
- Complete kit for ORTF for a pair of Sennheiser MKH 8020, 8040, or 8050 microphones
- MZL Connbox provides an additional level of isolation from cable-borne noise
- More robust: elastic bands have been replaced by the virtually unbreakable Lyre suspensions
- Light-weight system is fast and easy to set up
- Outstanding isolation from shocks and vibrations
The Stereo Windshield WS AE ORTF Kit (MZL) includes a Connbox with detachable 130mm Binder cables with MZL termination for use with Sennheiser MKH 8020, 8040, or 8050 mics and a Binder to 5-pin XLR output cable for additional protection from cable-borne noise. It also includes a Lyre suspension, a cable clamp, and a 145mm Stereo Windshield & Windjammer large enough to comfortably accommodate the microphones. A specially designed Rycote mounting adapter bar keeps the microphones at the correct spacing and angle for ORTF recording, and the Lyre suspension and shared windshield combine to provide a solution that is extremely resistant to wind noise and unwanted vibrations and handling noise.
The Rycote ORTF Kits are perfect for ORTF stereo recording which was pioneered by the engineers at the French state broadcaster in the 1960s, and is defined as using a stereo pair of microphones with the capsules spaced 17cm apart, and at an angle of 110 degrees to each other.
In addition to the MZL version, we offer two other variants of the ORTF kit:
Stereo Windshield WS AE ORTF Kit (LEMO) includes a Connbox with detachable 130mm Binder cables with Lemo termination for use with Schoeps CCMs and a Binder to 5-pin XLR output cable.
Stereo Windshield WS AE ORTF Kit (Connbox not included), suitable for a pair of Schoeps CCM or Sennheiser MKH 8000 mics.
The windshield body length is calculated by adding microphone length + XLR (5 cm or 2”) of the LONGEST microphone, in the M/S pair.
The suspension is determined by the diameter of the microphones. Any combination of the following can be made: 19 mm, 21 mm, 25 mm Round & 25 mm Square (for example for the MKH 416/MKH 30 the clips are 19/25Rd & 19/25Sq)
Compatibility – https://mymic.rycote.com/products/stereo-windshield-ws-ae-ortf-kit-mzl/#compatibility
MyMic – https://mymic.rycote.com/products/stereo-windshield-ws-ae-ortf-kit-mzl/
$1,366.00
Available on back-order
Related products
-
Microphone Accessories
Shure A58WS-GN Foam Windscreen for SM58 / Beta58 (Green)
Shure A58WS-GN
The Shure A58WS-GN is a high quality foam windshield designed for the Shure SM58 / PG48 / PG58 / Beta58 / and other similar shaped microphones. Perfect for helping to reduce wind and breath noise from entering the microphone. Available in 5 colours to help make identifying your microphone quick and easy.SKU: SHR-A58WS-GN -
Microphone Accessories
Rycote Triangular Black Mic Flag
Triangular Black Mic Flag
Product Code: 107302
A three-sided, black, triangular mic flag, suitable for microphone with 19 to 38 mm diameters.
Main Benefits:
- Fits A Wide Range Of Microphones
- Lightweight But Tough
Rycote’s Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber ‘vanes’ secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.
Customising your mic flag in Australia & New Zealand
We suggest that you have your custom designs & logos printed on high-quality, hard-wearing, UV-resistant vinyl stickers, this helps to reduce glare and to be fixed directly onto the flag. Each triangular flag requires a minimum of three stickers, opposed to the square flags that require four stickers per flag. It’s also a good idea to get a few additional stickers printed at the same time.
Typically, we suggest for a quick and effective method of printing, you contact your printing company directly with the details above, that said if the stickers are required urgently most (just-in-time) franchised printing companies across Australia can assist with quick printing solutions. As always, please feel free to reach out if you have any further questions.
Fits A Wide Range Of Microphones
With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag.
Lightweight But Tough
Lightweight and extremely hard-wearing, Rycote’s Mic Flags provide a large printable area for sponsors’ logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm.
MIC FLAG BROCHURE – CLICK HERE
Compatibility – https://www.mymic.rycote.com/products/triangular-black-mic-flag/#compatibility
MyMic – https://www.mymic.rycote.com/products/triangular-black-mic-flag/
SKU: RYC-RY107302 -
-
Microphone Accessories
Shure A57AWS Locking Windscreen for Beta57 Beta57 or Beta57A (Black)
The Shure A57AWS is a specially designed locking windshield to suit the popular Beta 57 and Beta 57A instrument microphones. The A57AWS helps to remove unwanted pops and wind noise from entering the microphone. A must have for live musicians, drums, and anyone wanting the best performance and sound from their mic.
SKU: SHR-A57AWS
