Rycote Miniature Lavalier Foams Black (1 Pack Of 10)
Available on back-order
Miniature Lavalier Foams Black (1 Pack of 10)
Product Code: 105514
Suitable for Lavalier mics of 2.8 mm in diameter and up to 15 mm length
Main Benefits:
- Up to 20 dB wind and pop noise attenuation with minimal high-frequency loss from this slip-on foam windshield
- Excellent resistance to moisture and UV light from the durable, high quality open-cell acoustic foam
- Available in Black, Beige and Brown for a low profile windshield solution (Miniature Lavalier Foams available in Black only)
The Lavalier Foam is a discreet, slip-on foam windshield, designed to protect personal microphones against light wind and pop noise.
Made of durable, high quality open-cell acoustic foam, Lavalier Foam windshields offer up to 20 dB pop and wind noise attenuation, whilst avoiding concurrent high frequency loss. Engineered exclusively for Rycote, this high quality foam also provides excellent resistance against the damaging effects of moisture and UV light.
An effective, low profile windshield solution for personal microphones, the Lavalier Foam is available in a range of Black, Beige and Brown colours.
Additionally, you can now also benefit from a further 12 dB wind noise attenuation with Rycote’s Lavalier Windjammer(Furry). Specifically designed for windier conditions, the Lavalier Windjammer™ fits on top of the Lavalier Foam and comes in a range of black, grey, and white as standard. Other colours are also available on request to allow you to select the right match for your chosen piece of clothing.
Tech Specs
Suitable for Lavalier mics of 2.8 mm in diameter and up to 15 mm length
Maximum Wind-noise Attenuation: 20 dB
Mini Lavalier Foams are suitable for the following microphones:
Audio-Technica: AT892 C
Beyerdynamic: MCE 7
Countryman: B6
Da-Cappo: DA04
Sanken: COS – 11
Sennheiser: MKE 1
Sony: ECM-88
Voice Technologies: VT500, VT506, VT910
Lavalier Foams are suitable for the following microphones: Audio-Technica: AT 899 Clockaudio: CL45 Countryman: B3, EMW DPA: 4060, 4061, 4062, 4063, 4065, 4066, 4067, 4088 Lectrosonics: M152 PSC: Millimic Tram: TR-50 Sennheiser: MKE-2 Shure: SM93, WL50, WL51 Sony: ECM-77B Sonotrim: STR Voice Technologies: VT500, VT506, VT910
Compatibility – https://mymic.rycote.com/products/miniature-lavalier-foams-black/#compatibility
MyMic – https://mymic.rycote.com/products/miniature-lavalier-foams-black/
$145.00
Available on back-order
Related products
-
Microphone Accessories
Shure A53M Shock Mount Microphone Clip for SM59 SM62 SM63 SM81 SM87
The Shure A53M shock mount microphone clip consists of an isolation mount and adapter. Attaching to a microphone with a shaft diameter of 20 mm to microphone stands. Shure models with a 20 mm shaft diameter include SM, KSM, Microflex and more. Suited for SM59 SM62 SM63 SM81 SM87
SKU: SHR-A53M -
Microphone Accessories
Shure A58WS-RD Foam Windscreen for SM58 / Beta58 (Red)
The Shure A58WS-RD is a high quality foam windshield designed for the Shure SM58 / PG48 / PG58 / Beta58 / and other similar shaped microphones. Perfect for helping to reduce wind and breath noise from entering the microphone. Available in 5 colours to help make identifying your microphone quick and easy.
SKU: SHR-A58WS-RD -
Microphone Accessories
Shure X2U XLR to USB Converter
The Shure X2U is a compact XLR to USB converter that allows you to directly record any dynamic microphone into your PC or MAC. Ultra portable and easy to use with up to 48kHz sample rate. A must have for aspiring recording artists, presenters, and reporters.
SKU: SHR-X2U -
Microphone Accessories
Rycote Triangular Black Mic Flag
Triangular Black Mic Flag
Product Code: 107302
A three-sided, black, triangular mic flag, suitable for microphone with 19 to 38 mm diameters.
Main Benefits:
- Fits A Wide Range Of Microphones
- Lightweight But Tough
Rycote’s Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber ‘vanes’ secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.
Customising your mic flag in Australia & New Zealand
We suggest that you have your custom designs & logos printed on high-quality, hard-wearing, UV-resistant vinyl stickers, this helps to reduce glare and to be fixed directly onto the flag. Each triangular flag requires a minimum of three stickers, opposed to the square flags that require four stickers per flag. It’s also a good idea to get a few additional stickers printed at the same time.
Typically, we suggest for a quick and effective method of printing, you contact your printing company directly with the details above, that said if the stickers are required urgently most (just-in-time) franchised printing companies across Australia can assist with quick printing solutions. As always, please feel free to reach out if you have any further questions.
Fits A Wide Range Of Microphones
With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag.
Lightweight But Tough
Lightweight and extremely hard-wearing, Rycote’s Mic Flags provide a large printable area for sponsors’ logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm.
MIC FLAG BROCHURE – CLICK HERE
Compatibility – https://www.mymic.rycote.com/products/triangular-black-mic-flag/#compatibility
MyMic – https://www.mymic.rycote.com/products/triangular-black-mic-flag/
SKU: RYC-RY107302
