Rycote Cyclone Cable, 260mm (Lemo)
Available on back-order
CYCLONE CABLE, 260MM (LEMO)
Product Code: 017033
$309.00
Available on back-order
Related products
-
Microphone Accessories
Rycote Single Square White Mic Flag
0 out of 5(0)Square White Mic Flag
Product Code: 107307
A four-sided, white, square, mic flag, suitable for microphones with 19 to 38 mm diameters.
Main Benefits:
- Fits A Wide Range Of Microphones
- Lightweight But Tough
Rycote’s Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber ‘vanes’ secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.
Customising your mic flag in Australia & New Zealand
We suggest that you have your custom designs & logos printed on high-quality, hard-wearing, UV-resistant vinyl stickers, this helps to reduce glare and to be fixed directly onto the flag. Each square flag requires a minimum of four stickers, opposed to the triangular flags that require three stickers per flag. It’s also a good idea to get a few additional stickers printed at the same time.
Typically, we suggest for a quick and effective method of printing, you contact your printing company directly with the details above, that said if the stickers are required urgently most (just-in-time) franchised printing companies across Australia can assist with quick printing solutions. As always, please feel free to reach out if you have any further questions.
Fits A Wide Range Of Microphones
With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag.
Lightweight But Tough
Lightweight and extremely hard-wearing, Rycote’s Mic Flags provide a large printable area for sponsors’ logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm.
MIC FLAG BROCHURE – CLICK HERE
Compatibility – https://www.mymic.rycote.com/products/square-white-mic-flag/#compatibility
MyMic – https://www.mymic.rycote.com/products/square-white-mic-flag/
SKU: RYC-RY107307 -
Microphone Accessories
Shure X2U XLR to USB Converter
0 out of 5(0)The Shure X2U is a compact XLR to USB converter that allows you to directly record any dynamic microphone into your PC or MAC. Ultra portable and easy to use with up to 48kHz sample rate. A must have for aspiring recording artists, presenters, and reporters.
SKU: SHR-X2U -
Microphone Accessories
Rycote 40/55 Reporter Mic Foam (Single)
0 out of 5(0)40/55 Reporter Mic Foam
Product Code: 104405
Suitable for reporter mics of 40 mm diameter, with slots no further than 55 mm from the front of the mic.
Main Benefits:
- Up to 10 dB wind and pop noise attenuation with minimal high-frequency loss from this discreet, slip-on windshield
- Excellent resistance to moisture and UV light from the durable, high quality open-cell acoustic foam
The Reporter Mic Foam is a discreet, slip-on foam windshield, designed to protect the microphone head against light wind and pop noise. Made of durable, high quality open-cell acoustic foam, these windshields offer up to 20 dB wind noise attenuation, whilst keeping high frequency loss to a minimum.
Engineered exclusively for Rycote, this high quality foam also provides excellent resistance against the damaging effects of moisture and UV light.
Additionally, you can now also benefit from a further 12 dB wind noise attenuation with Rycote’s Foam Windjammer, specifically designed to accommodate our range of Mic Foam windshields.
Compatibility – https://mymic.rycote.com/products/40_55-reporter-mic-foam/#compatibility
MyMic – https://mymic.rycote.com/products/40_55-reporter-mic-foam/
SKU: RYC-RY104405 -
Microphone Accessories
Shure A58WS-GN Foam Windscreen for SM58 / Beta58 (Green)
0 out of 5(0)Shure A58WS-GN
The Shure A58WS-GN is a high quality foam windshield designed for the Shure SM58 / PG48 / PG58 / Beta58 / and other similar shaped microphones. Perfect for helping to reduce wind and breath noise from entering the microphone. Available in 5 colours to help make identifying your microphone quick and easy.SKU: SHR-A58WS-GN -
Microphone Accessories
Rycote Overcovers Adv, Black (Pack)
0 out of 5(0)Overcovers Advanced Black (Pack)
Product Code: 066305
Contents: 25 x Stickies, 23mm Round. 5 x Fur Discs, 26mm Round
Overcovers utilise Rycote exclusive fur technology, providing excellent wind-noise protection for lavalier microphones. They consist of a discreet, fur covering and are supplied with Stickies. With a Stickie affixed to clothing or skin, a fur disc is affixed over the top of a lavalier microphone.
Key features
- Large size (26mm) ideal for DPA Concealers
- Supplied with Stickies Adv Round, at 23mm also bigger than ‘Originals’
MyMic – https://rycote.com/microphone-windshield-shock-mount/lavalier-solutions/
SKU: RYC-RY066305