Radius Urchin Lavalier Windshield (Black, 2-Pack)

Radius Urchin Lavalier Windshield (Black, 2-Pack) - Image 2

Radius Urchin Lavalier Windshield (Black, 2-Pack) - Image 3

Radius Urchin Lavalier Windshield (Black, 2-Pack) - Image 4

Radius Urchin Lavalier Windshield (Black, 2-Pack) - Image 5

Radius Urchin Lavalier Windshield (Black, 2-Pack) - Image 6

Microphone Accessories

Radius Urchin Lavalier Windshield (Black, 2-Pack)

For Small Lavalier Microphones
Built-In Foam Core
Short-Length Synthetic Fur

$63.00

Description

Protect your audio capture from wind noise with the Urchin Lavalier Windshield by Radius. This windshield, available here in a 2-pack, fits most small lavalier microphones. A foam core and short-length synthetic fur provide two layers of wind protection.

SKU: RAD-URC-00148 Category: Microphone Accessories Brand: Radius

Related products

Microphone Accessories
Rycote Neumann Tlm 103 Foam (Single)
Microphone Accessories
Rycote Neumann Tlm 103 Foam (Single)

0 out of 5
(0)
Neumann TLM 103 Foam

Product Code: 104423

Foam Windshield for Neumann TLM 103

Main Benefits:

Up to 10 dB wind and pop noise attenuation with minimal high-frequency loss from this discreet, slip-on windshield

Excellent resistance to moisture and UV light from the durable, high quality open-cell acoustic foam

The Large Diaphragm Mic Foam is a discreet, slip-on foam windshield, designed to protect large-diaphragm shotgun microphones against light wind and pop noise. Made of durable, high quality open-cell acoustic foam, our foam windshields offer up to 20 dB wind noise attenuation, whilst keeping high frequency loss to a minimum.

Engineered exclusively for Rycote, this high quality foam also provides excellent resistance against the damaging effects of moisture and UV light.

Compatibility – https://mymic.rycote.com/products/neumann-tlm-103-foam/#compatibility

MyMic – https://mymic.rycote.com/products/neumann-tlm-103-foam/
SKU: RYC-RY104423
$35.00
Add to cart
Microphone Accessories
Shure AP98WS Windscreen for PGA98H and PGA98D
Microphone Accessories
Shure AP98WS Windscreen for PGA98H and PGA98D

0 out of 5
(0)

Shure AP98WS
The AP98WS is a custom foam windscreen designed for use with the PG98 microphones. Perfect for reducing unwanted breath and wind noise.

SKU: SHR-AP98WS
$17.00
Add to cart
Microphone Accessories
Rycote Single Square White Mic Flag
Microphone Accessories
Rycote Single Square White Mic Flag

0 out of 5
(0)
Square White Mic Flag

Product Code: 107307

A four-sided, white, square, mic flag, suitable for microphones with 19 to 38 mm diameters.

Main Benefits:

Fits A Wide Range Of Microphones

Lightweight But Tough

Rycote’s Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber ‘vanes’ secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.

Customising your mic flag in Australia & New Zealand

We suggest that you have your custom designs & logos printed on high-quality, hard-wearing, UV-resistant vinyl stickers, this helps to reduce glare and to be fixed directly onto the flag. Each square flag requires a minimum of four stickers, opposed to the triangular flags that require three stickers per flag. It’s also a good idea to get a few additional stickers printed at the same time.

Typically, we suggest for a quick and effective method of printing, you contact your printing company directly with the details above, that said if the stickers are required urgently most (just-in-time) franchised printing companies across Australia can assist with quick printing solutions. As always, please feel free to reach out if you have any further questions.

Fits A Wide Range Of Microphones

With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag.

Lightweight But Tough

Lightweight and extremely hard-wearing, Rycote’s Mic Flags provide a large printable area for sponsors’ logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm.

MIC FLAG BROCHURE – CLICK HERE

Compatibility – https://www.mymic.rycote.com/products/square-white-mic-flag/#compatibility

MyMic – https://www.mymic.rycote.com/products/square-white-mic-flag/
SKU: RYC-RY107307
$37.00
Add to cart
Microphone Accessories
Rycote Triangular Black Mic Flag
Microphone Accessories
Rycote Triangular Black Mic Flag

0 out of 5
(0)
Triangular Black Mic Flag

Product Code: 107302

A three-sided, black, triangular mic flag, suitable for microphone with 19 to 38 mm diameters.

Main Benefits:

Fits A Wide Range Of Microphones

Lightweight But Tough

Rycote’s Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber ‘vanes’ secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.

Customising your mic flag in Australia & New Zealand

We suggest that you have your custom designs & logos printed on high-quality, hard-wearing, UV-resistant vinyl stickers, this helps to reduce glare and to be fixed directly onto the flag. Each triangular flag requires a minimum of three stickers, opposed to the square flags that require four stickers per flag. It’s also a good idea to get a few additional stickers printed at the same time.

Typically, we suggest for a quick and effective method of printing, you contact your printing company directly with the details above, that said if the stickers are required urgently most (just-in-time) franchised printing companies across Australia can assist with quick printing solutions. As always, please feel free to reach out if you have any further questions.

Fits A Wide Range Of Microphones

With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag.

Lightweight But Tough

Lightweight and extremely hard-wearing, Rycote’s Mic Flags provide a large printable area for sponsors’ logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm.

MIC FLAG BROCHURE – CLICK HERE

Compatibility – https://www.mymic.rycote.com/products/triangular-black-mic-flag/#compatibility

MyMic – https://www.mymic.rycote.com/products/triangular-black-mic-flag/
SKU: RYC-RY107302
$35.00
Add to cart
Microphone Accessories
Shure A53M Shock Mount Microphone Clip for SM59 SM62 SM63 SM81 SM87
Microphone Accessories
Shure A53M Shock Mount Microphone Clip for SM59 SM62 SM63 SM81 SM87

0 out of 5
(0)

The Shure A53M shock mount microphone clip consists of an isolation mount and adapter. Attaching to a microphone with a shaft diameter of 20 mm to microphone stands. Shure models with a 20 mm shaft diameter include SM, KSM, Microflex and more. Suited for SM59 SM62 SM63 SM81 SM87

SKU: SHR-A53M
$79.00
Add to cart

Radius Urchin Lavalier Windshield (Black, 2-Pack)

Related products

Rycote Neumann Tlm 103 Foam (Single)

Rycote Neumann Tlm 103 Foam (Single)

Neumann TLM 103 Foam

Shure AP98WS Windscreen for PGA98H and PGA98D

Shure AP98WS Windscreen for PGA98H and PGA98D

Rycote Single Square White Mic Flag

Rycote Single Square White Mic Flag

Square White Mic Flag

Rycote Triangular Black Mic Flag

Rycote Triangular Black Mic Flag

Triangular Black Mic Flag

Shure A53M Shock Mount Microphone Clip for SM59 SM62 SM63 SM81 SM87

Shure A53M Shock Mount Microphone Clip for SM59 SM62 SM63 SM81 SM87