Nanlite PavoTube 30C LED TWIN KIT LED Tube RGBWW 1.2m
Let your creativity run wild with these LED tubes. Put a splash of colour onto a background, or light up your subject with a specific hue. The PavoTubes feature 0 to 100% dimming with maximum illumination of 2850 lumens at 5600K, as well as a full spectrum RGB and pre-programmed special lighting effects. With the colour temperature adjustable from 6500-2700K, a CRI of 98 and a TLCI of 95 this RGB LED tube exceeds most studio lighting needs. It also features a choice of over 360 static light colours on the RGB spectrum and can cycle through the entire spectrum at a speed of your choice. With six pre-programmed special effects in a simple-to-use menu system, this NanLite RGB light tube makes it easy to create lighting scenes that can otherwise be difficult to replicate.
At the touch of a button, you can output the red and blue flash of a police car, a flickering flame (candlelight), the flash of a lightning storm, the Flicker of a TV screen, the flicker of a dying light bulb. and an SOS signal. Each of the special effects has many different settings to help you adjust it and create the exact effect you need, as well as a built-in LCD panel showing you exactly what settings you’re using, making it easy to fine-tune and then recreate them in future. With easy-to-use dials and buttons built into the light tube, as well as built-in 2.4GHz radio control and master/slave functions, this RGB tube light is versatile enough to fit right into your existing set up without needing a lot of extra preparation.
$975.00
This light’s master/slave mode also makes it easy to synchronize multiple lights by chaining them together using the included sync cable to create a powerful bank of lights performing synchronized effects. Perfect for use in the studio or on location, this lightweight tube is available in 2-foot and 4-foot lengths. Both length variants are 1.9 inches in diameter making them T12 compatible. It can be powered using the included AC adapter and also has two built-in 2200mAH batteries for use where no mains power supply is available. Supplied in a padded carrying case complete with all the accessories you need to get going, including mounting clips for adapting your light to a tripod or the wall.
The Pavotube has octagonal ends, allowing it to be placed on the floor or a surface at a specific angle to give you maximum control over the throw of the lighting. Both 2-foot and 4-foot variants are available as single lights as well as kits of two lights and four lights.
Studio Quality Lighting
An amazingly versatile studio lighting fixture that featuring 0-100% dimming, a max output of 2850 lumens, adjustable colour temperature from 6500-2700K as well as a full spectrum RGB and pre-programmed special lighting effects.
Full Creative Control
Easily achieve beautiful results without adding plastic filters or gels. The PavoTube Tubes’ easy-to-use dials and buttons enable you to dial temperature from warm to cold (6500K-2700K) or hue and saturation in RGB mode.
Power Anywhere
Perfect for use in the studio or on location, PavoTube RGB+W Tubes can run off either the included AC adapter or their internal Li-ion batteries for up to 2 hours at full brightness when no mains power is available.
Limitless Possibilities
Simply connect multiple PavoTube RGB+W Tubes together via the included sync cord to build and shape a powerful bank of lights with synchronized adjustments and effects.
Specifications:
Model: PavoTube 30C 2Kit
Dimensions:117cm x 48cm x 48cm
Weight: 1.2kg
Dimming: 0 to 100 % continuous
Color Temperature: 2700K-6500K
Power Consumption: 32W*5
Power Supply: DC15V/4A,100-240V AC
CRI/TLCI: 98/95
Control: Dimming with NNRC1 Remote, Wifi App control with with LGA30 Wifi Router, Synchro control with included Pavotube Sync cables
Battery Runtime:
At 10% Brightness: 20 Hours
At 50% Brightness: 4.4 Hours
100% Brightness: 2.2 Hours
Brightness:
2700K LED Bulb:1m-633Lux/59fc; 2m-194Lux/18fc; 3m-101Lux/9fc
6500K LED Bulb:1m-719Lux/67fc; 2m-209Lux/19fc;3m-111Lux/10fc
RED Flat LED:1m-251Lux/23fc; 2m-82Lux/8fc;3m-43Lux/4fc
GREEN Flat LED:1m-663Lux/62fc;2m-210Lux/20fc;3m-109Lux/20fc
BLUE Flat LED:1m-103Lux/10fc;2m-38Lux/6fc;3m-23Lux/2fc
What’s included:
2x Nanlite 30C Pavotube lights
2x Nanlite Mounting clips
1x Nanlite Power Supply
1x Nanlite Carry Bag
Related products
-
LED tubes and tape
LED Tape RGB 5m reel 24V
The LED Tape RGB is a film grade LED tape, featuring 60 RGB LEDs per metre. It can be mounted using the included double-sided adhesive. The tape comes in reels of 5m, with a power consumption of 96 watts per roll. When driven by a LED controller and desk, the user can control the brightness and hue of the tape.
SKU: n/a -
LED tubes and tape
Nanlite PavoTube 30C LED Tube RGBWW 1.2m
Let your creativity run wild with these LED tubes. Put a splash of colour onto a background, or light up your subject with a specific hue. The PavoTubes feature 0 to 100% dimming with maximum illumination of 2850 lumens at 5600K, as well as a full spectrum RGB and pre-programmed special lighting effects. With the colour temperature adjustable from 6500-2700K, a CRI of 98 and a TLCI of 95 this RGB LED tube exceeds most studio lighting needs. It also features a choice of over 360 static light colours on the RGB spectrum and can cycle through the entire spectrum at a speed of your choice. With six pre-programmed special effects in a simple-to-use menu system, this NanLite RGB light tube makes it easy to create lighting scenes that can otherwise be difficult to replicate.
At the touch of a button, you can output the red and blue flash of a police car, a flickering flame (candlelight), the flash of a lightning storm, the Flicker of a TV screen, the flicker of a dying light bulb. and an SOS signal. Each of the special effects has many different settings to help you adjust it and create the exact effect you need, as well as a built-in LCD panel showing you exactly what settings you’re using, making it easy to fine-tune and then recreate them in future. With easy-to-use dials and buttons built into the light tube, as well as built-in 2.4GHz radio control and master/slave functions, this RGB tube light is versatile enough to fit right into your existing set up without needing a lot of extra preparation.
SKU: NAN-NNPAV30C1KIT -
LED tubes and tape
Astera Titan LED Tube RGBAM 1m
Titan is the ultimate LED tube for filmmakers, TV studios and any creative person. It emits powerful, tunable white with ultra-high color rendering as well as colored light which can be applied to individual pixels or the whole tube. The tube offers unlimited range of usage; indoor or outdoor, AC-powered or on battery, on the go with the AsteraApp, with wired or wireless DMX. Includes stand, 2 eye bolts, 2 holders with locking pin. Charger sold seperately.
SKU: AST-FP1 -
LED tubes and tape
LED Tape Bicolour 5m reel 24V
The LED Tape Dual Colour is a film grade high CRI LED tape. The tape can be mounted using the included double-sided adhesive and comes in reels of 5m. When driven by a hybrid LED controller, the user can control both the brightness and white colour temperature of the tape.
SKU: n/a -
LED tubes and tape
Godox TL30 2 Light RGB Tube Light Kit 30cm
The TL30 RGB LED Tube Light is a lightweight LED light with a compact tube-shaped form factor, featuring a bi-color Kelvin range from 2700-6300K, with an incredibly high TLCI rating of 99 and CRI rating of 97, so colors will render with extremely high accuracy in still and video applications alike. It also features full RGB gamut output for an array of up to 36,000 available colors, with green/magenta adjustability, and 13 tunable effects.
For all its versatility, the TL30 is simple to set up and use. It is easily controlled using intuitive, built-in analog controls and an LED display, and also pairs with the free-to-download control App via Bluetooth from up to approximately 98 feet away. An integrated lithium-ion battery will power the TL30 for 60 minutes at full power, and it recharges or operates via a USB-C port from any 5V/2A USB source. Built-in magnets allow it to attach to any metal surface, and each end of the tube has a 1/4″-20 threaded female socket.
SKU: GOD-11.TL30-K2
