Miller Versa 4120 CXV10 Solo-Q 100 3-STG (Carbon Fibre) Tripod System With Bag

The 3768 CX10 Solo 100 3-stage (carbon fibre) tripod system with a robust 100mm ball levelling fluid head designed for users needing the stability that comes with 100mm tripods, cost effectively.
CX10 employs CB Plus technology providing 16 positions of counterbalance and 5+0 levels of pan and tilt settings of Miller’s fluid drag with 60mm of camera plate travel, enabling you to easily select the perfect settings to match your configuration for ultimate camera control.
The CX10 is matched with the 3 stage Solo (carbon fibre) tripod that results in range topping height range of 373-2023mm (14.7-79.6″), all terrain versatility in the lightest CX10 system package.

The Benro BV10 tripod kit supports up to 10kgs making it a perfect match for studio applications and larger fully rigged video cameras.

All of the main controls, other than counterbalance, are located on the left side of the head making it easy to make adjustments with a single hand while operating the camera. The 5-step counterbalance (steps 0-4) allows you to dial in the correct amount of counterbalance for your set-up. The 4 step pan & tilt movements make sure your movements are smooth and steady. One 3/8″ accessory mount come in handy when needing to add a simple audio recorder or monitor. For added versatility, the tie down stud is removable to convert the BV10 head to flat base mode for mounting to a slider. Excellent stability is achieved with the integrated 100mm metal ball. The eighth generation two stage aluminium tripod is a double tandem leg design that uses an adjustable, removable spreader, a metal 100mm bowl, oversized quick positive leg locks and dual spike feet with pads, making this kit perfect for heavy loads, ideal for supporting jibs and fully rigged cameras.

The tripod system extends to a maximum height of 164cm, while getting as low as 74cm. A carry case and shoulder strap are included.

The 3756 CX10 Toggle 2-stage (alloy) tripod system with a robust 100mm ball levelling fluid head designed for users needing the stability that comes with 100mm tripods, cost effectively.
CX10 employs CB PlusTM technology providing 16 positions of counterbalance and 5+0 levels of pan and tilt settings of Miller’s fluid drag with 60mm of camera plate travel, enabling you to easily select the perfect settings to match your configuration for ultimate camera control.
The CX10 is matched with the 2-stage Toggle (alloy) tripod and above-ground spreader to provide a large height range 543-1713mm (21.4-67.4″), positive leg toggle locks and the versatility of using the system across all terrains.