Matthews C-Clamp 2X Jr Rec’R 6.0”
Matthews C Clamps are available in 4″, 6″, 8″, 10″ and 12″ with or without 5/8″ mounting pins or Junior Receivers. Each clamp has a steel channel welded to both sides of the opening for better and safer locking. Clamps made for mounting Baby fixtures have two separate pins at different angles so that the light fixtures may fit with minimal clearance. Junior Receivers are made in two fixed versions. Horizontal and Vertical and a Universal Mounting Junior Receiver which can be used in any one of eight different positions.
Matthews C Clamps are manufactured from premium drop forged steel. It should be noted however, that since the Matthews clamp is an adaptation of a standard C Clamp, there is no effective warranty on the part.
$196.20
Related products
-
Clamps Half Coupler, Barrel, Grab, C-Clamp and Piper
Avenger C4462-1 Clamp Eye Coupler 16mm Spigot 300kg Payload 42-52mm Wide TUV SUD Certified
Clamps Half Coupler, Barrel, Grab, C-Clamp and PiperAvenger C4462-1 Clamp Eye Coupler 16mm Spigot 300kg Payload 42-52mm Wide TUV SUD Certified
The Avenger C4462-1 MP Eye Coupler grid clamp comes supplied with a 16 mm(5/8”) baby male spigot. Commonly referred to as a Little Ben Clamp this popular clamp is ideal for many rigging systems, truss and entertainment configurations. This popular MP cheeseboro clamp has a wider clamp range than the LP clamp and is ideal for many rigging systems, truss and entertainment configurations. The lower jaw has a special flattened shape which helps in the sizing of this clamp and the increased flexibility to clamp down on different types of tubing. Capable of holding up to 300 kg loads this clamp will perform in many demanding environments. The MP Eye Coupler uses a wing nut with washer locking design and is able to clamp down on round tubes, truss or grids ranging from 42 mm(1.65”) to 52 mm(2.04”) and is 50 mm(1.96”) wide. TÜV and SÜD certified. Recommended Accessories: C155, C155-01, E390, C460-1, C463-1, C4460-1, C464-1, E200, C4465-1.
SKU: AVN-C4462-1 -
Clamps Half Coupler, Barrel, Grab, C-Clamp and Piper
Avenger C210 Clamp Baby Pipe w/ Tommy Bar 10mm to 55mm Range 100Kg Payload Alu
Clamps Half Coupler, Barrel, Grab, C-Clamp and PiperAvenger C210 Clamp Baby Pipe w/ Tommy Bar 10mm to 55mm Range 100Kg Payload Alu
Avenger C210 Clamp Baby Pipe w/ Tommy Bar 10mm to 55mm Range 100Kg Payload
Works on diameters from 10mm to 55mm. It has a 5/8″ mounting stud and a load capacity of 220.46 lb (100 kg). Made of aluminum.
SKU: AVN-C210 -
Clamps Half Coupler, Barrel, Grab, C-Clamp and Piper
Avenger C460-1 Clamp Lp Eye Coupler TUV 220Kg Payload 42-52mm Wide 13mm Unthreaded Hole
Clamps Half Coupler, Barrel, Grab, C-Clamp and PiperAvenger C460-1 Clamp Lp Eye Coupler TUV 220Kg Payload 42-52mm Wide 13mm Unthreaded Hole
Avenger C460-1 Clamp Lp Eye Coupler TUV 220Kg Payload 42-52mm Wide 13mm Unthreaded Hole.
The base model of LP eye coupler is a regular clamp to use on pipes or trusses. Made from aluminium alloy, it can be tightened with a wingnut and has a 13mm hole for mounting lights and other accessories. It can support a payload up to 500kg and works on pipes ranging from 48mm to 52mm
SKU: AVN-C460-1
