Matthews C-Clamp 2X Pin 4.0”
Matthews C Clamps are available in 4″, 6″, 8″, 10″ and 12″ with or without 5/8″ mounting pins or Junior Receivers. Each clamp has a steel channel welded to both sides of the opening for better and safer locking. Clamps made for mounting Baby fixtures have two separate pins at different angles so that the light fixtures may fit with minimal clearance. Junior Receivers are made in two fixed versions. Horizontal and Vertical and a Universal Mounting Junior Receiver which can be used in any one of eight different positions.
Matthews C Clamps are manufactured from premium drop forged steel. It should be noted however, that since the Matthews clamp is an adaptation of a standard C Clamp, there is no effective warranty on the part.
$126.00
Related products
-
Clamps Half Coupler, Barrel, Grab, C-Clamp and Piper
Avenger C150 C-Clamp Swivelling TUV Cert 28-78mm Range 10Kg on 16mm. 75Kg on 28mm
Clamps Half Coupler, Barrel, Grab, C-Clamp and PiperAvenger C150 C-Clamp Swivelling TUV Cert 28-78mm Range 10Kg on 16mm. 75Kg on 28mm
The Avenger C150 Swiveling ”C” Clamp is an extremely robust Gravity Cast clamp that is designed to clamp on to truss, pipe grids or round tubes. It is rated to hold from 10-75 kg/22 lbs-165.3 lbs. (Up to 10KG on the 16 mm/ 5/8 inch retractable spigot and up to 75KG on the Junior 28 mm/1 1/8 inch receiver.) The clamping range on this clamp is 28-78 mm/1.1-3.1 inches. The added swiveling feature allows for easy aiming of any light. The clamp includes a safety cable with pin for the junior pin and an additional thumb screw to securely lock the pin when needed. TÜV SÜD certified. Recommended Accessories: C155, E200, E390, 158, E390, 014-14, 014-38, D200, C888UH, C500, C150.
SKU: AVN-C150 -
Clamps Half Coupler, Barrel, Grab, C-Clamp and Piper
Avenger C465-1 Coupler LP Eye 28mm Bushing 220kg payload Aluminum
Clamps Half Coupler, Barrel, Grab, C-Clamp and PiperAvenger C465-1 Coupler LP Eye 28mm Bushing 220kg payload Aluminum
The Avenger C465-1 LP Eye Coupler grid clamp comes supplied with a 28 mm (1 1/8”) junior receiver. This popular clamp is ideal for many rigging systems, truss and entertainment configurations. The LP Eye Coupler uses a wing nut with washer locking design and is able to clamp down on round tubes, truss or grids ranging from 48 mm (1.9”) to 52 mm (2.04”) and is 50 mm (1.96”) wide. Capable of holding up to 300 kg/661.4 lb loads this clamp will perform in many demanding environments. TÜV and SÜD certified. Recommended Accessories: E390, C155, C460-1, C461-1, C463-1, C4460-1, C464-1, E200, C4465-1.
SKU: AVN-C465-1
