Manfrotto MVGEXT Extension in carbon fibre for Manfrotto Gimbals
The Carbon Fiber extension is a 257mm/10 inches pole that can be attached to the base of your gimbal.
It is a compact, portable and lightweight accessory that improves your shooting experience, increasing flexibility and versatility. Quick and easy to attach, it allows you to explore a wider range of perspectives and creative angles.
It is compatible with most of the gimbals available on the market, thanks to ¼-inch threaded studs and threaded holes on the top and bottom of the handle.
$55.00
Related products
-
Stabilisers
Tilta Armor man 3.0 Overhead Configuration Gimbal Ring Adapter Clamp(Pair)
If you have a ring-based gimbal, the Overhead Configuration Gimbal Ring Adapter Clamps allow for an easy quick release solution to attach and detach your gimbal to the Armor Man 3.0’s mechanical arms when in the overhead operating mode. The clamps attach to the left and right sides of the top of the gimbal ring and then after the Overhead Configuration Cable Pulleys are attached to each of the Armor Man’s arms, the operator can simply use the carabiners of the extendable bungee cables to attach to the gimbal to then start operating. When you want to detach the gimbal, simply release the carabiners off of the clamps.
SKU: TIL-ARM-T03-ORAC -
Stabilisers
Tilta Armor man 3.0 Support Vest
The Armorman 3.0 Support Vest is the main section of the support system. The mechanical arms attach to either the back of the vest for the normal configuration or over the top of the support for the overhead configuration. Release cables hang over the front of the vest to allow the operator to release the tension of the arms when they are in the locked position. Padding surrounds the vest for maximum comfort and adjustable straps allow for the vest to fit to any body type.
SKU: TIL-ARM-T03-SV -
Stabilisers
Manfrotto MVAQR-PLATE MOVE Quick release system – Plate
MOVE is the first quick-release system to help increase your pace on set and make switching set-ups effortless.
It is designed to reduce downtime when switching between tripods, motion control gear, and stabilizers in fast paced, creative environments.
At the core of this revolutionary system is a flat base and plate set-up that creates a universal connector.
The plate is made of hard anodized, machined aluminum and thanks to its standard 3/8”and 1/4” top attachment screw ensure a unique versatility to be mounted with a wide range of products.
This innovative plate combines practicality with high performance, it features a grub screw (antirotation pin) to guarantee a strong connection with any supports, stabilizers or motion control where mounted and a dedicated 1/4” adapter seat to always bring 1/4” adapter with you.
The Move plate’s design makes it extremely easy to set up and lock your camera in any configuration.
SKU: MAN-MVAQR-PLATE -
Stabilisers
Manfrotto MVGBF-CF Fast GimBoom Carbon Fibre
GimBoom is the revolutionary new FAST boom developed by Manfrotto with universal fitting for your Gimbal.
From ground level to overhead position (drone perspective), the new Manfrotto GimBoom allows you to get more versatile and flexible use from your Gimbal, raising your production values to the next level.
Thanks to its standard 3/8” and 1/4” top attachment screw, the GimBoom guarantees an easy connection with your Gimbal. It’s exceptionally compact (hand baggage size with 51cm minimum operating height) and lightweight (800g.) And, thanks to its carbon-fibre construction – capable of taking a payload of 6.5 kg at maximum extension – the GimBoom is also incredibly strong.
The unique FAST Twisting Lock makes it quick and simple to deploy and extend, allowing the user to control the entire boom with a single gesture. With two risers and three telescopic sections, the full extended length is more than double (1.15m/45.27in) the minimum operating length (0.51m/20.07in), while the intuitive graphic design means locking and unlocking the boom have never been easier.
Three thread connectors arranged at 120° on the top of the middle section enable the GimBoom to pair with dedicated GimBoom accessories, with a handy rubber cap to avoid damage when placing it on the ground.
SKU: MAN-MVGBF-CF -
Stabilisers
Tilta Armor man 3.0 Support Cup(pair)
If you have a top bar-based gimbal, the Armor Man 3.0 Support Cups allow for an easy solution to attach and detach your gimbal to the Armor Man 3.0’s mechanical arms while they are in the lower operating position. When you want to attach the Armor Man to the gimbal, simply fit the side arms of the gimbal into the support cups and then re-grab the arms like normal to start operating. When you want to stop operating, simply dock the gimbal, grab onto the support cups and detach them from the handles.
SKU: TIL-ARM-T03-SC
