Jupio ProLine V-Mount Adapter plate for 2x Sony NP-F Series Batteries
- V-Mount Adapter plate allows you to use 2 x Sony NP-F series batteries
$44.00
The Jupio ProLine V-Mount Adapter plate allows you to use 2 x Sony NP-F series batteries instead of a V-Mount battery.
Equipped with a D-tap output interface and LED indication for the battery status.
Related products
-
Battery adapters and DC couplers
Dynacore D-HB26 Safety Adapter V-Lock 26V
Dynacore D-HB26 is a safety adaptor for 26 Volt V-Lock products
This adaptor allows the wiring of your 26 volt batteries to not work if accidentally installed on a 14.4 volt system.
Installing a 26 volt battery accidentally on a 14.4 Volt product will potentially overpower these items causing failure. Using these adaptors mean that you are protected from this happening. Please contact us for further details.
SKU: DYN-D-HB26 -
Battery adapters and DC couplers
Dynacore D-C Multi-Voltage Splitter V-Lock for camera rigs
Dynacore D-C Voltage splitter allows for connection of Multiple devices requiring different voltages on a camera rig.Multi-output adapter designed for DSLR cameras and accessories.
Output Voltage: 5V/7.2V/12V/15V(11V to 17V).
Built-in HDMI distributor, one standard signal input and two standard signal output.
V-Mount ENG batteries are required for the power.SKU: DYN-D-C Mount(With out HDMI) -
Battery adapters and DC couplers
Blackmagic Design Blackmagic Pocket Camera Battery Grip
The optional Blackmagic Pocket Battery Grip lets you replace the camera’s standard LP‑E6 battery with two L‑series batteries so you can shoot for over 2 hours on a single charge! That’s a massive battery life, in a design that integrates with the camera itself and can be used as a single unit. Featuring a unique carbon fiber design, non‑slip hand grips, and a slide out tray that holds 2 L‑series batteries, the Pocket Battery Grip also makes it easier to hold the camera on longer shoots because it increases the grip area of the handle. You can also charge the batteries in the grip via the camera’s 12V DC power connection in between takes!
SKU: BLA-CINECAMPOCHDXBT -
Battery adapters and DC couplers
Tether Tools Case Relay Camera Coupler CRN5B for Nikon
- More cost effective than purchasing multiple proprietary camera batteries
- Power sources are non-proprietary. Power your camera with the same 5V battery you use to charge phones or tablets.
- Never need to charge camera batteries again. And never run out power.
- Compatible with most Canon, Nikon, Sony, Panasonic, Fujifilm, and Olympus cameras. Check to confirm your camera model is supported.
- A Case Relay Camera Power System (sold separately) is required to use the Relay Camera Coupler.
SKU: TET-30.CRN5B -
Battery adapters and DC couplers
Dynacore D-2BS-24 Converter V-Lock 14.8V input to 24V output
D-2BS/A-24 is a power station designed to utilise two 14.4 volt V-Lock batteries creating a power source outputing power for any device needing 24Volts, such as an LED panel.
It can supply up to 240Watt output (24V, 10A).
Designed to work with equal power batteries where a larger capacity is preferredLCD Display indicates Output Voltage
The unit has a Low Voltage Indicator LED to warn of potential problems shown here:
Color Red=Under/Over Voltage
Color Green=Good
Green Blinking=Battery LowOutput is via 3 Pin Female XLR Output
24V, 10A, 240W(Max)A Hexagon connector can be mounted to a stand using a super clamp or convi clamp.
SKU: DYN-D-2BS-24
