The IDX IPL-150 V-Mount Stackable PowerLink Battery with D-Tap & USB Output – 143Wh features a V-mount and has a 143Wh capacity. This advanced battery features IDX’s Powerlink system that lets you piggyback and hot swap other IPL batteries onto this one when mounted on a camera, for virtually unlimited runtime. The Powerlink system draws power from the battery furthest from the camera or light fixture until that battery is drained, at which time it starts to pull power from the next furthest battery. You can also stack up to four batteries to charge them. The power link system works with IDX DUO-C batteries as well, as long as those are the last ones on the linking chain.
IDX IPL-150 V-Mount Stackable PowerLink Battery with D-Tap & USB Output – 143Wh
Power Linking for Extended Runtime
14.4V 143Wh V-Mount Battery
Data Information Displays in Viewfinder
Handles up to 11.3A Loads
1 x D-Tap Advanced Accessory Output
USB Port
Battery Circuit Protection
5-LED Battery Life Indicator
Retractable V-Mount Connector Cover
Compatible with IDX VL-2000 Chargers
$728.00
Related products
-
V-Lock and B-Mount batteries
Dynacore DS-150SI Battery V-Lock Regular 14.8V 150Wh with built in charger
V-Lock and B-Mount batteriesDynacore DS-150SI Battery V-Lock Regular 14.8V 150Wh with built in charger
0 out of 5(0)● Internal Charger Battery V-Mount.
● Lightweight, compact, high-performance Lithium-ion battery pack.
● It can be charged by itself without using an external charger. The LED indicator will light on from 1 LED to 5 LEDs during charging, and all off when fully charged.
● The five-step LED power status indicator shows accurately remaining battery capacity.
● Industry-standard Power Tap& USB output(5V, 2A) can fit on-board Camera Light and other accessories. Before using the USB output, long-press the LED check button for 3 seconds to activate it.
● Input Voltage AC90V~240V 50~60Hz, apply to the global power grid.
● Built-in intelligent IC circuit control, protection for over-charge, over-discharge, over-current, outside circuit short and non-equilibrium an unconventional situation.
● Non-memory effect.
● Environment-friendly: No poisonous elements
● Dynacore Batteries are manufactured according to CE, ROHS standardSKU: DYN-DS-150SI -
V-Lock and B-Mount batteries
RED REDVOLT NANO-V Mount 49Wh Battery
0 out of 5(0)The REDVOLT NANO-V battery is a small lightweight power solution for the KOMODO-X, weighing in at only 0.63lbs (288g), ideal for gimbals, drones, and other setups where form factor and weight matter. The batteries dimensions (66 x 88 x 44mm) ensure a completely flat surface on the top and sides of the camera allowing for various combinations of cages and plates to be attached uninterrupted.
Featuring a 49Wh capacity with a maximum output of 6A the battery can power the KOMODO-X and DSMC3 RED Touch 7.0 inch LCD for short durations when wanting to shoot as light weight as possible.
REDVOLT NANO-V was designed in partnership with Core SWX and is compatible with most cameras/modules that accept V-Lock batteries. For issues or troubleshooting, please visit https://coreswx.supportsystem.com.
SKU: RED-740-0059 -
V-Lock and B-Mount batteries
Fxlion Nano Three Battery V-Lock 14.8 150Wh
0 out of 5(0)High power tiny sizw V-mount battery. With 15Wh up to 10 Amps working current you can get a lot of power out of this little buddy. With one D-tap output and two USB outputs, So you’re never running out of possibilities to power your equipment.
The best thing about it is the regulated USB-C output, that can charge your MacBook or any other USB-C compatible device on the go.
At the moment there are three capacities available-a 50Watthours, a 98Watthours and a 150Watthours called NANO ONE, NANO TWO and NANO THREE.A LCD shows you the remaining canpacity and voltage as well as the voltage of USB and USB-C ports. These sockets are protected from dust and moisture by a rubber lid.
There anr some dedicated accessories around, like different plates-of course in the compact design of the NANO battery.
SKU: FXL-NANOTHREE -
V-Lock and B-Mount batteries
Dynacore DHB-150 Battery V-Lock 26V 150Wh
0 out of 5(0)To use these, you must also purchase a Dynacore D-HB26 Safety Adapter V-Lock 26V for each battery.
- Voltage: 26V
- 150Wh/5.8Ah capacity
- Max Output: 200W
- Max Output Current: 20A
- Max Input Current: 5A
- Operating Temp: -30C
SKU: DYN-DHB-150