The Hasselblad Battery Charging Hub for X System supports the current 3400mAh batteries. It charges a single battery in two hours and 18 minutes and two cells charge in two hours and 48 minutes. The charging hub is also compatible with first-generation X System 3200mAh batteries that will charge in approximately three hours. When the cells are fully charged, the hub will announce an audible chime. Additionally, the charger supplies power to the batteries from power banks through its USB Type-C connector or via its included power supply. During the charging process, the front LEDs indicate the status and capacity of the batteries.
Hasselblad Battery Charging Hub Set
2-Bay Charger with USB Type-C Connector
LED Indicators Show Status & Capacity
For Current X System 3400mAh Batteries
Charges First Gen X System Batteries
Audible Chime Announces Charge Complete
Includes Power Supply
$270.00
Related products
-
Battery adapters and DC couplers
Blackmagic Design Blackmagic Pocket Camera Battery Grip
0 out of 5(0)The optional Blackmagic Pocket Battery Grip lets you replace the camera’s standard LP‑E6 battery with two L‑series batteries so you can shoot for over 2 hours on a single charge! That’s a massive battery life, in a design that integrates with the camera itself and can be used as a single unit. Featuring a unique carbon fiber design, non‑slip hand grips, and a slide out tray that holds 2 L‑series batteries, the Pocket Battery Grip also makes it easier to hold the camera on longer shoots because it increases the grip area of the handle. You can also charge the batteries in the grip via the camera’s 12V DC power connection in between takes!
SKU: BLA-CINECAMPOCHDXBT -
Battery adapters and DC couplers
Dynacore D-TS Hot-Swap Adapter V-Lock
0 out of 5(0)Dynacore D-TS Hot Swap system.
The D-TS is a Universal Hot-Swap battery mount, it allows the user to hot-swap a fresh battery while still operating equipment, so you can remove the depleted battery while the leaving the other battery connected so that there is no downtime.
Utilising the V-Lock mounting system, it can be attached to any portable device with an existing battery bracket.SKU: DYN-D-TS -
Battery adapters and DC couplers
Nanlite BH-FZ60 Battery handle NPF
0 out of 5(0)A handheld grip, battery buckle, and low mount stand all-in-one.
This clever Nanlite battery mount holds two Sony NP-F (L series) batteries to power the Nanlite Forza 60. The battery handle also doubles as a low-mount light stand.
The BH-FZ60 handle also makes it easy to handhold the Foza 60 for lighting moving subjects, for light painting, and for creating a ‘wash of light’ effect in your video.
The battery handle grip can be mounted on a light stand when you wish to power your Nanlite Forza 60 from NP-F batteries.
The BH-FZ60 battery handle includes a 5.5mm DC-out cable to connect to the DC-in port on the Nanlite Forza 60 or Forza 60B.
SKU: NAN-NNBHFZ60 -
Battery adapters and DC couplers
Dynacore D-HB26 Safety Adapter V-Lock 26V
0 out of 5(0)Dynacore D-HB26 is a safety adaptor for 26 Volt V-Lock products
This adaptor allows the wiring of your 26 volt batteries to not work if accidentally installed on a 14.4 volt system.
Installing a 26 volt battery accidentally on a 14.4 Volt product will potentially overpower these items causing failure. Using these adaptors mean that you are protected from this happening. Please contact us for further details.
SKU: DYN-D-HB26