Hama Mounting Shoe with Insulating Plate
The Hama Mounting Shoe with Insulating Plate is a simple but very versatile little photographic accessory. Firstly, it allows traditional hot shoe flashguns to be mounted onto new SLR and DSLR cameras which are fitted with multi-pole accessory shoes, for their dedicated flash units. By mounting this in between the flash gun and the camera shoe, it acts as an insulator, stops the flash being triggered accidentally and protects the hot shoe against short circuiting as a result of the multi point contacts on the camera shoe base. The flash in this case will need to be triggered by means of a cable between the flashgun and the sync socket on the camera.
A second use is to mount shoe flashguns onto tripods or other stands that have a 6.4mm, ¼” thread on them as part of a studio or macro setup. The 6.4mm, ¼” socket on the base of the adapter is simply screwed onto the tripod or stand and the flash slid into the shoe to be securely mounted, it will again need to be triggered with a sync cable or using one of Hama’s extension cables or flash remote slave triggers if the distance to the camera is too great.
$32.00
Related products
-
Camera rig attachments, brackets and components
Wooden Camera Top Plate (Sony FX9)
Top plate specifically for the Sony FX9. Arrays of various mounting points. Can be used with original Sony handle. Sony XDCA-FX9 Extension Unit can also be attached to the rear of the camera without obstruction.
SKU: WOO-54.275100 -
Camera rig attachments, brackets and components
SmallRig 1241 Cold Shoe
1. Attached to camera accessories with 1/4″-20 and M2.5 threads.
2. Allows mounting on-camera lights, shoe handles, microphones, and more.
3. Comes with bending bevels to prevent accessory removal.
4. Two white arrows show the way of mounting accessories.SKU: SRI-1241 -
Camera rig attachments, brackets and components
Manfrotto Rods 300mm for Camera Cage Fits MVCCS, MVCCM, MVCCL paired with MVCCBP
Camera rig attachments, brackets and componentsManfrotto Rods 300mm for Camera Cage Fits MVCCS, MVCCM, MVCCL paired with MVCCBP
These 300mm (11.8”) long Rods are one of the basic building blocks of all SYMPLA rigs, and are always used in parallel pairs to create a track which allows components to be mounted and positioned correctly.
Rods can be united to make longer tracks (using the included screw junctions), joined at different heights using the V-Offset component, or shifted laterally using the H-Offset component. Although the possible uses are numerous, these long Rods primarily serve as the track for SYMPLA Fixed or Variable Plates, since the extra length allows a wide range of camera and lens (and viewfinder) combinations to be correctly positioned for the operator and for other SYMPLA components, such as the Flexible Mattebox.
Made in 15mm (0.59”) diameter tubular aluminum for strength and reduced weight, 300mm Rods are the longer of SYMPLA’s two sizes. Supplied as a pair, with two 1/2”-13UNC screw junctions included.
SKU: MAN-MVA520W -
