Dynacore D-SA V-Lock to Gold Mount Adaptor
It may convert the V-plate to the Gold Mount bracket. It offers a solution to allow the use of Gold Mount batteries on V-Mount cameras.
It can also be used as a charger adapter, enabling you to charge Gold Mount batteries on V-lock chargers.
- Lock Gold Mount battery to the Gold Mount side of the D-SA, then the battery converts into V-Mount.
- Lock V-Mount side of D-SA with the camera, then the battery ready to work.
Weight: Approx 0.15Kg
Dimension: 120×84×24.5mm
$100.00
Related products
-
Battery adapters and DC couplers
Nanlite BT-BA-SNP/DC Battery adaptor NPF
Attach a pair of NPF batteries to extend the runtime of your Pavotube 15C or 30C.
The Nanlite BT-BA-SNP/DC can be easily mounted to a light stand or boom, and provide power to a high mounted Pavotube or Forza. The 15V DC output is designed for the Pavotube 15C, and Pavotube 30C, Forza 60, and Forza 60B.
A pair of NPF970 batteries mounted onto this adaptor will provide 88Wh of capacity. That is nearly as much as a small (98Wh) V-Mount battery.
SKU: NAN-NNBASNPDC -
Battery adapters and DC couplers
SmallRig NP-F Battery Adapter Plate Lite for BMPCC 4K, 6K – 3093
1. The plate fits Sony NP-F type batteries to provide greater battery life for BMPCC 4K & 6K.
2. It provides different output ports, including a 12V DC output port and a 7.4V DC output port.
3. LED indicator for low battery warning.
4. Rubber pads on the bottom for a more stable installation.
5. Two Charging Cables – LP-E6 Dummy Battery Cable and a DC to 2 Pin LEMO Cable.SKU: SRI-3093 -
Battery adapters and DC couplers
Dynacore D-2BS-24 Converter V-Lock 14.8V input to 24V output
D-2BS/A-24 is a power station designed to utilise two 14.4 volt V-Lock batteries creating a power source outputing power for any device needing 24Volts, such as an LED panel.
It can supply up to 240Watt output (24V, 10A).
Designed to work with equal power batteries where a larger capacity is preferredLCD Display indicates Output Voltage
The unit has a Low Voltage Indicator LED to warn of potential problems shown here:
Color Red=Under/Over Voltage
Color Green=Good
Green Blinking=Battery LowOutput is via 3 Pin Female XLR Output
24V, 10A, 240W(Max)A Hexagon connector can be mounted to a stand using a super clamp or convi clamp.
SKU: DYN-D-2BS-24
