Yokes & brand-specific mounts
Showing 1–15 of 30 results
-
Yokes & brand-specific mounts
Aputure LS 1200 Four Lights Bracket
- Designed for LS 1200d Pro LED Lights
- Supports up to Four Fixtures
- Allows Pan and Tilt for Each Light
- Achieves 4800W Output with LS 1200d Pro
- Four Junior Pin Receivers
- Junior Mounting Pin for Stands & Rigging
- Compatible with Other Select Fixtures
- Rosette Yoke Supports Heavy Lights
- Heavy-Duty Aluminum Frame
- Reinforced Corners for Durability
PLEASE CALL FOR AVAILABILITY
T: 03 9486 5899SKU: APU-24.APB0249A35 -
Yokes & brand-specific mounts
Aputure Motorised Yoke
Designed for Aputure’s all-new Electro Storm point-source fixtures, the Motorised Yoke is an electronic accessory that dramatically increases your workflow efficiency on set. Whether suspended or rigged in hard-to-reach areas, the Motorised Yoke allows for smooth, remote operation of 360º pan and tilt adjustments.
Precision control is key on high-end professional film sets. When pairing the Motorised Yoke with the Electro Storm CS15 or Electro Storm XT26, adjusting your light source is now faster and more accurate than ever. Control the pan and tilt of your light directly from the control box or remotely via the Sidus Link app or DMX controls, allowing you to craft the perfect shot – even when your light is rigged in hard-to-reach places. And, do it all without needing additional cables or power supplies.
SKU: APU-APP3738A91 -
Yokes & brand-specific mounts
Aputure Nova P600C Dual Head Yoke
Designed for studio use and professional applications, this Aputure Dual Head Yoke allows you to mount mount two Nova P600c lamp heads onto a single yoke, providing the equivalent surface area of a 2 x 2′ light fixture. Both lamp heads feature independent 360° tilt adjustment so you can achieve a wider spread of light or a high-intensity push in a single direction. By stacking the two units and utilizing vertical space, this dual head yoke conserves valuable space on set and allows you to consolidate stands for fast-paced shoots or to minimize rigging for long-term installations.
– Mounts two Nova P600c LED Panels onto one yoke and offers 360° tilt adjustment for both lamps
– Provides equivalent surface area of a 2 x 2′ light fixture
– Two sets of high-strength disk brake tilt locks
– Durable single piece aluminum alloy frame with built-in 1-1/8″ junior pin
– Conserves valuable space on setSKU: APU-24.NOVAP600C-DHYOKE -
Yokes & brand-specific mounts
Aputure Nova P600C Pole Operated Yoke
Designed for studio use and permanent installations, this Aputure Pole Operated Yoke allows you to mount the Nova P600c LED Panel to a lighting grid. By rotating the knobs affixed to the yoke, the pan and tilt axes of the fixture can be independently adjusted for 360° rotation. Additionally, a pole can be used to operate the pan and tilt axes from a lower height, removing the need to climb up to the lighting grid when the angle of the Nova P600c needs to be adjusted.
SKU: APU-24.NOVAP600C-POLEYOKE -
Yokes & brand-specific mounts
Aputure Quick Release Clamp for Light Storm
The versatile lightning clamp features an adjustable jaw that can clamp onto a wide variety of stand sizes, as well as a ratchet handle for easy tightening. The integrated quick release receiver has a thumb lever for easy opening, and the included quick release plate has a V-mount wedge for conveniently hanging an external battery for a light unit.
SKU: APU-25.AP0148 -
Yokes & brand-specific mounts
Arri Center Mount Yoke (SkyPanel)
The Center Mount Yoke is a ball-in-socket yoke that allows for positioning the SkyPanel in almost any orientation including vertically. The Center Mount Yoke replaces the traditional stirrup and slides on to the rail mounting system located on the back of the SkyPanel.
Ball-in-socket design
28 mm (Junior) Spigot with long “goose neck”
+/- 90OE Movement
Tool-less attached to the rail mounting system on the SkyPanel
Works with the SkyPanel S30, S60 and S120SKU: ARR-L2.0008078 -
Yokes & brand-specific mounts
Arri Fixed Center Mount Yoke (SkyPanel)
The Fixed Center Mount Yoke is a fixed 28 mm spigot that allows for direct attachment from the back of the SkyPanel to mounting hardware. The Fixed Center Mount Yoke replaces the traditional stirrup and slides on to the rail mounting system located on the back of the SkyPanel. Great for low ceilings or pointing the SkyPanel straight down or straight forward (i.e. a wall of SkyPanels)
– 28 mm (Junior) Spigot
– Tool-less attached to the rail mounting system on the SkyPanel
– Works with the SkyPanel S30, S60 and S120
– Comes with two safety loop bracketsSKU: ARR-L2.0008080 -
Yokes & brand-specific mounts
Arri Orbiter Manual Yoke with Spigot
The yokes for Orbiter come with a newly developed release system that allows for quick change from a manual version lamphead to a pole operated version. The 28 mm spigot (Junior pin) is already mounted on the yoke. No tools needed for setting up Orbiter.
- Quick release system
- No tools needed
- Manual yoke made of high strength aluminum profile
- Steel yoke for pole operation (pan, tilt)
- Includes 28 mm spigot (Junior pin)
SKU: ARR-L2.0034025 -
Yokes & brand-specific mounts
Arri Orbiter P.O. Yoke with Spigot
The yokes for Orbiter come with a newly developed release system that allows for quick change from a manual version lamphead to a pole operated version. The 28 mm spigot (Junior pin) is already mounted on the yoke. No tools needed for setting up Orbiter.
- Quick release system
- No tools needed
- Manual yoke made of high strength aluminum profile
- Steel yoke for pole operation (pan, tilt)
- Includes 28 mm spigot (Junior pin)
SKU: ARR-L2.0036642 -
Yokes & brand-specific mounts
Arri Rail Mount Adapter for SkyPanel PSU
The Rail Mount Adapter attaches to the SkyPanel PSU (no tools required) and allows for the mounting of the PSU to the rail mount system on the back of the SkyPanel lamphead. If an all-inone system is required, this accessory will accomplish the task.
– Attaches to SkyPanel PSU or Battery Adapter Plates
– Tool-less system allows for quick attachment and release from the PSU
– Slides onto rail mount system on the back of SkyPanel
– For S30, S60, S120 PSU onlySKU: ARR-L2.0008082 -
Yokes & brand-specific mounts
Arri Super Clamp Adapter for SkyPanel PSU
The Super Clamp Adapter attaches to the back of the SkyPanel PSU (no tools required) and allows for the mounting of the PSU to a wide variety of objects including light stand stems and truss.
– Attaches to SkyPanel PSU or Battery Adapter Plates
– Comes with Super Clamp for mounting to a variety of objects
– Tool-less system allows for quick attachment and release from the PSUSKU: ARR-L2.0006921 -
Yokes & brand-specific mounts
Chauvet DJ CBB6 Rigging Bracket
The Chauvet DJ CBB-6 is a rigging bracket for securing up to 6 compatible Chauvet fixtures together. Build extravagant lighting displays, or seamless pixel mapped animations with uniform spacing. Very easy to use and install.
SKU: CDJ-CBB6
