Grip
Showing 946–960 of 1149 results
-
Stands Basic Lighting, Baby, Backlite and Nano
Nanlite LS-FL-T12 Floor Light Stand for Pavotube 15C 30C
Stands Basic Lighting, Baby, Backlite and NanoNanlite LS-FL-T12 Floor Light Stand for Pavotube 15C 30C
Nanlite Floor Light Stand for Pavotube. Compatible with: PavoTube 15C/30C/II 15X 30X series tube light.
Key features: This metal tripod provides stable support with protruding clips that connect to the stand by 1/4 mount. The two clip design strengthens the grip of the tube for multi-layer protection and enhanced stability in use. Easy connection: The protruding clips well utilize the remaining space between the tube end and the tripod without affecting the emitting surface, allowing for easy DMX/Power cables connection on the stand to achieve both practicality and esthetics at the same time.
SKU: NAN-NNLSFLT12 -
Stands Basic Lighting, Baby, Backlite and Nano
Nanlite LS-FL-T12-PT-8FT Floor Light Stand for Pavotube 60X
Stands Basic Lighting, Baby, Backlite and NanoNanlite LS-FL-T12-PT-8FT Floor Light Stand for Pavotube 60X
Nanlite Floor Light Stand for Pavotube. Mount your Pavotube II 60X upright with this floor stand.
Key features: This metal tripod provides stable support with protruding clips that connect to the stand by 1/4 mount. The two clip design strengthens the grip of the tube for multi-layer protection and enhanced stability in use. Easy connection: The protruding clips well utilize the remaining space between the tube end and the tripod without affecting the emitting surface, allowing for easy DMX/Power cables connection on the stand to achieve both practicality and esthetics at the same time.
SKU: NAN-NNLSFLT12PT8FT -
Stands Basic Lighting, Baby, Backlite and Nano
Nanlite LS-FL-T8 Floor Light Stand for T8 LED tubes
Mount your Pavotube T8-7X upright with this floor stand.
Key features: This floor stand made of robust plastic can fold to be used as a hand grip with great tenacity and load capacity. A stainless steel knurled spigot can be attached through the 1/4 thread for mounting the tube light with great convenience and steadiness. Easy connection: The knurled spigot extends the space between the tube end and the tripod, allowing for easy DMX/Power cable connection on the stand to achieve both practicality and esthetics at the same time.
SKU: NAN-NNLSFLT8 -
Clamps Ball Joint, Boom and Tilt Head
Nanlite Mini Ball Head with Hot Shoe Adapter and 1/4-20 Mount for Nanlite PavoTube II 6C
Clamps Ball Joint, Boom and Tilt HeadNanlite Mini Ball Head with Hot Shoe Adapter and 1/4-20 Mount for Nanlite PavoTube II 6C
Easy Swivel adjustment and light stand mount for small LED lights.
The Nanlite AS-BH-1/4 is an ideal mini ballhead to adjust the position of any small on-camera LED panels or a Pavotube II 6C on a light stand
Combining this ballhead with either a Kupo Superclaw or Mini Viser clamp will also allow you to mount and angle a small LED almost anywhere.
SKU: NAN-NNASBH14 -
-
Tube and Bar Holders and Connectors
Nanlite T12 Tube Clip with 16mm baby receiver
NNHDT121LA
Clip a Pavotube to a light stand.
This affordable LED tube mount will allow you to secure the pavotube to a light stand, and position them vertically or horizontally.
Features a 16mm baby receiver to mount onto a stand or a boom.
SKU: NAN-NNHDT121LA -
Tube and Bar Holders and Connectors
Nanlite T12 Tube Clip with mini ballhead
Clip a Pavotube to a light stand.
The Nanlite HD-T12+BH is an affordable Pavotubtube mount. It will allow you to secure the pavotube to a light stand, and swivel them on the mini ballhead to any angle. This clip is compatible with the Pavotube II 6C, 15C, and 30C.
Features a 16mm baby receiver to mount onto a stand or a boom.
SKU: NAN-NNHDT12BH -
Tube and Bar Holders and Connectors
Nanlite T12 Tube Holder Ball Head Yoke with Gooseneck for 2 tubes
Tube and Bar Holders and ConnectorsNanlite T12 Tube Holder Ball Head Yoke with Gooseneck for 2 tubes
Tube Holder Ball Head Yoke with Gooseneck for 2 tubes.
This unit will allow you to clip up to 2 Pavotube LED tubes to a light stand, and position them vertically or horizontally.
Features a 16mm baby receiver to mount onto a stand or a boom.
SKU: NAN-NNHDT122BHG -
Tube and Bar Holders and Connectors
Nanlite T12 Tube Holder Ball Head Yoke with Gooseneck for 4 tubes
Tube and Bar Holders and ConnectorsNanlite T12 Tube Holder Ball Head Yoke with Gooseneck for 4 tubes
Tube Holder Ball Head Yoke with Gooseneck for 4 tubes.
This unit will allow you to clip up to 4 Pavotube LED tubes to a light stand, and position them vertically or horizontally.
Features a 16mm baby receiver to mount onto a stand or a boom.
SKU: NAN-NNHDT124BHG -
Tube and Bar Holders and Connectors
Nanlite T12 Tube Holder Ball Head Yoke with Swivel Pin for 1 tube
Tube and Bar Holders and ConnectorsNanlite T12 Tube Holder Ball Head Yoke with Swivel Pin for 1 tube
Tube Holder Ball Head Yoke with Swivel Pin for 1 tube.
The Nanlite HD-T12-1-BHP Pavotube holder unit will allow you to clip in a Pavotube 15C/15X or 30C/30X and easily adjust it into any angle and position. The robust ballhead mechanism is easy to adjust and fine-tune.
Features a steel 16mm baby pin to mount into a grip head.
SKU: NAN-NNHDT121BHP -
Background Supports and Autopoles
Photoflex BackDrop Pole – Extends to 3.6m
The BackDrop Pole is designed to be a secure, stable, and easy-to-use solution for holding backdrops and background rolls on your photo set. The unibody design with telescoping sections results in fast, secure set ups.
Use with Photoflex BackDrops or with your existing backgrounds. Photoflex BackDrop features a sewn channel that easily slides over our BackDrop Pole.
Our backdrop pole requires two LiteStands to support it. If you do not already have LiteStands for it, then we suggest purchasing either the First Studio BackDrop support kit or the ProDuty Backdrop support kit.
Extends to 3.8m (12 feet, 6 inches). Collapses to 1.4m (4 feet, 7 inches) for easy storage and travel.
SKU: PFL-DP-BP412 -
Background Supports and Autopoles
Photoflex ProDuty Heavy Duty BackDrop Support Kit
The Photoflex ProDuty BackDrop Support Kit includes a BackDrop Pole, two LiteStands: Large, and a rugged carry bag to hold the whole kit. Shoot with confidence with this strong, stable outfit.
The BackDrop Pole is a single-unit with telescoping sections that constructs easily. The Pole stores collapsed at 1.4m (4’ 7”) and extends to 3.8m (12′ 6″).
Each LiteStand extends to 3.7m (12′) high. The extra height afforded with these stands means you can shoot your model from a low angle without seeing the top of the backdrop in your shot. These are exceptionally sturdy stands with a maximum load rating of 18kg (40 pounds). The “flip-top” design of the brass post adds versatility for multiple uses in your studio.
SKU: PFL-DP-SHDBGSPKT
