Grip
Showing 241–255 of 1149 results
-
Adaptors, Spigots and Studs
Avenger E600C 5/8” Snap-In Steel Pin For Super Clamp
The Avenger E600C Snap In Pin has a hexagonal end that snaps into a Super Clamp or similar grip accessory. The other end will accept a lighting fixture that has a 5/8″ female receiver. It is fabricated from chrome-plated steel.
SKU: AVN-E600C -
Adaptors, Spigots and Studs
Avenger E610 Snap In Baby Pin 5/8″ 16mm to Wood Screw
The Avenger E610 Baby Pin is a zinc-plated 5/8″ steel stud with a wood screw that can be permanently or temporarily mounted directly into a wood surface. The zinc-plating prevents corrosion of the steel pin.
SKU: AVN-E610 -
Adaptors, Spigots and Studs
Avenger E650 Pin with Collar 6” 5/8” 16mm Stud 7/8” Collar
The Avenger E650 6.0″ Pin with Collar is a zinc-plated steel 16mm (5/8″) diameter stud with a 22mm (7/8″) collar. The collar acts as an anchor to prevent the pin from sliding completely through a grip clamp.
SKU: AVN-E650 -
-
Arms Grip/Extension, Boom and Tripod Mount
Avenger F100 Arm Jr Offset Chrome Steel 50cm 28mm Pin 28mm Receiver
Arms Grip/Extension, Boom and Tripod MountAvenger F100 Arm Jr Offset Chrome Steel 50cm 28mm Pin 28mm Receiver
The Avenger F100 Junior Offset Arm allows you place a light over an obstruction such as a wall or offset a large light fixture from its stand. It has a length of 50cm. The F100 mounts to a stand with a 28mm (1 1/8″) Junior receiver and will accept a light fixture that has a Junior 28mm (1 1/8″) pin.
SKU: AVN-F100 -
Pump Cups
Avenger F1000 Pump Cup Swivel w 16mm Spigot 2kg Payload Non-porpous surfaces
The Avenger F1000 Pump Cup (suction cup) with a 16 mm/ 5/8 in baby Swivel Spigot or pin is ideal for mounting small lights and camera systems onto flat, non-porous surfaces like glass and metal. Pump cups are ideal for rigging car shoots especially when combined with other grip accessories like grip heads and grip arms. Place the pump on the desired surface and pump the blue plunger until you no longer can see the red line. If the red line appears you need to re-pump the pump cup. Capable of holding up to 2 kg/ 4.4 lb, the F1000 is a perfect tool when non-traditional surfaces are used for positioning of lighting and grip tools. Recommended Accessories: D200, D520, D500, 014-14, 014-38, C155.
SKU: AVN-F1000 -
Pump Cups
Avenger F1100 Pump Cup w 16mm spigot 2kg Payload Non-porous surfaces
The Avenger F1100 Pump Cup (suction cup) with a 16 mm/ 5/8 in baby fixed spigot or pin is ideal for mounting small lights and camera systems onto flat, non-porous surfaces like glass and metal. Pump cups are ideal for rigging car shoots especially when combined with other grip accessories like grip heads and grip arms. Place the pump on the desired surface and pump the blue plunger until you no longer can see the red line. If the red line appears you need to re-pump the pump cup. Capable of holding up to 2 kg/ 4.4 lb the F1100 is a perfect tool when non-traditional surfaces are used for positioning of lighting and grip tools. Recommended Accessories: D200, D520, D500, 014-14, 014-38, C155.
SKU: AVN-F1100 -
-
Polyholders/Forks Foamcore
Avenger F1504 Fork w Pin for Foam/Styrene Connect to a Super Clamp or Grip Head
Polyholders/Forks FoamcoreAvenger F1504 Fork w Pin for Foam/Styrene Connect to a Super Clamp or Grip Head
This useful tool made in aluminium alloy can hold a piece of foam core, used usually to soften lights in studio and on location. It has four tines to pierce and hold a sheet. The 16mm pin can be attached to either a super clamp or grip head.
SKU: AVN-F1504 -
Polyholders/Forks Foamcore
Avenger F1521 Polyholder 2” w 5/8” Spigot Connect to a Super Clamp or Grip Head
Polyholders/Forks FoamcoreAvenger F1521 Polyholder 2” w 5/8” Spigot Connect to a Super Clamp or Grip Head
The polyholder has a 16mm spigot. The “board” clamp has two sides, one white for the reflective side of the polystyrene; one black for the black lightstopping side. It doesn’t damage the poly. Plate dimensions: 150 x 220mm. You can connect it to a super clamp or grip head.
SKU: AVN-F1521 -
Plates Wall
Avenger F300 Wall Plate Junior 18mm socket weighs 360g
The Avenger F300 Junior Wall Plate frees up floor space and allows you suspend a large light from a wall or ceiling. Alternately, you can nail it to the floor for very low angle illumination. This Avenger wall plate has a 28mm receiver to mount larger fixtures and is provided with a T handle.
SKU: AVN-F300 -
Plates Wall
Avenger F301 Plate Baby Wall 16mm socket weighs 400g
The Avenger F301 Baby Wall Plate has a 16 mm/ 5/8 inch receiver with locking T-Knob. Baby plates are a great tool for the quick mounting of lights and fixtures in places where light stands and clamps cannot be used. With 8 mounting holes on the plate, this baby wall plate has a lot of flexibility and is capable of mounting to different types of walls, beams and structures. Recommended Accessories: E250, F825, F830, 013, C155, D200.
SKU: AVN-F301 -
Arms Grip/Extension, Boom and Tripod Mount
Avenger F600 Arm Baby Offset Chrome Steel
This baby off set arm is 38cm (14 in) long and has twin 16mm pins and mounts on a stand with a 16mm receiver. This arm enables a light to be placed over an obstruction or to offset a light fixture from its stand.
SKU: AVN-F600 -
Plates Wall
Avenger F800 Wall Plate Baby 3” 16mm stud weighs 400g 3” long
The F800 3” Baby Wall Plate has a 3 inch/7.6 cm static baby spigot or pin. Baby wall plates are a great tool for quick mounting of lights and fixtures in places where light stands and clamps cannot be used. With 8 mounting holes on the plate, this baby wall plate has a lot of flexibility and is capable of mounting to different types of walls, beams and structures. Recommended Accessories: 014-14, 014-38, 014BIM, 158, E390, F830, F830RH, 026, F831TH, C155, C1575B.
SKU: AVN-F800 -
Plates Wall
Avenger F805 Plate Wall Baby 16mm socket weighs 720g 6” long
The F805 6” Baby Wall Plate has a 6 inch/15.24 cm static baby spigot or pin. Baby wall plates are a great tool for quick mounting of lights and fixtures in places where light stands and clamps cannot be used. With 8 mounting holes on the plate, this baby wall plate has a lot of flexibility and is capable of mounting to different types of walls, beams and structures. Recommended Accessories: 014-14, 014-38, 014BIM, 158, E390, F830, F830RH, 026, F831TH, C155, C1575B.
SKU: AVN-F805
