Stabilisers

This waist support attaches to the Armorman 3.0 vest as the main support for the vest which positions the weight of the Armorman 3.0 and gimbal/camera setup onto the operator’s midsection. Padding surrounds the waist support for maximum comfort and an adjustable strap allows for the support to fit to any body type.

Protect and store your Armor Man 3.0 with this travel-sized waterproof rolling safety case. Custom foam cutouts tightly pack your vest and two shock-absorbing stabilized arms into the case for maximum protection and portability.

• Designed for the DJI RS 2 Gimbal
• Stabilizer Arm with Support Vest
• Easy Assembly and Transport
• Wireless Thumb Controller and Receiver
• V-Mount Battery Plate
• Smartphone and Monitor Brackets
• Easy High and Low Modes

This Hard Shell Safety Case is designed to store and protect the Hydra Alien.

This allows you to safely transport the system between shooting locations and neatly store the system when it is not in use.

The waterproof design protects the case and equipment from hazards like rain and snow.

This case functions as a replacement for the one included with the Hydra Alien, but can also be used to store other equipment if needed.

Various camera setups supported by durable mounting surface.
Highly efficient when switching between camera setups.
Flexible installation angles
Multiple built-in expansion screw holes for mounting accessories.
Creative freedom is at your fingertips with efficient and flexible run/stop functionality.
8 hours of continuous operation for enhanced battery life
Custom-made power supply base plate and side holding bracket for RS 2 provides additional protection for your camera during high speed driving and bumpy shooting conditions.
Various and flexible mounting options. Supports high and low shooting angles. Compatible with a wide range of car types and complex mounting surfaces.
Operating from inside the camera car with full control: Remote run/stop control / Real-Time monitoring / Accurate follow focus
Achieve truly cinematic camera movements. High spring stiffness with the compensation from the hydraulic damping pole. Reduce the amplitude to stabilize the image during sudden movements. Optimized stability provides smooth camera movement and outstanding image.
The Pro Kit includes the Hydra Alien Car Mounting System, plus the Remote Control Kit  and the Hydra Alien Monitor Bracket.
The Hydra Alien Pro Kit offers a complete package for flexible car mounting while including additional accessories to offer more accurate control and improved ease of use.
The Pro Kit features the Remote Control Kit which offers full wired or wireless control of the DJI RS2 or RS3 Pro and includes the Hydra Alien Monitor Bracket which makes it easier to monitor your footage while controlling the Ronin.
The Hydra Alien Car Mounting System was designed from the ground up to work in conjunction with smaller gimbals to allow for a lightweight solution to car-mounted cinematography.
The system utilizes a highly customizable combination of dovetail-like plates and suction cups that can support a payload of 50kg each.
Highly elastic shock-absorbing silicon provides longer durability and less abrasion, while the updated suction cup plungers create a stronger seal for improved security in colder weather.
When interconnected, the system allows users to fine-tune the exact placement of their shot to achieve almost any angle possible when mounting to a vehicle.
The system also uses a shock absorbing arm to better stabilize the camera for certain shots as well as a spring-loaded cradle head if the intended shot requires that the gimbal be flipped upside down.
The newly included Hydraulic Dampening Pole further stabilizes the arm to provide smoother results when driving conditions are less than optimal.
The Hydra Alien supports full wireless control of the RS2 and RS3 Pro via the included Remote Control Kit, which allows you to control your gimbal’s settings as well as the record and photo functions of your camera via either a wired or wireless connection.
It also includes a thumbstick that allows you to control the pan and tilt of your gimbal for maximum precision while operating.
The new Hard Shell Safety Case is designed to store and protect the Hydra Alien.
This allows you to safely transport the system between shooting locations and neatly store the system when it is not in use.
The waterproof design protects the case and equipment from hazards like rain and snow.
This case functions as a replacement for the one included with the Hydra Alien, but can also be used to store other equipment if needed.
High, low. To the side of the car, mounted on top of it — almost any car mounted shot can be configured using the Hydra Alien Car Mounting System. Let your imagination run wild!
NOTE: This system supports any gimbal that can mount via 1/4″-20 screws and power via P-Tap. The Remote Control Handle only supports the RS2 and RS3 Pro. 
CAUTION: We do not recommend using the suction cups on wrapped vehicles due to suction issues related to direct sunlight and heat. 
RS3/RS3 Pro: The M Key is NOT able to mimic the function of the gimbal. The M Key on this unit can ONLY change the Mode setting.
V-Mount
1：Hydra Alien Dovetail Plate L1（HDA-T02-L1）*1
2：Hydra Alien Dovetail Plate L2（HDA-T02-L2）*1
3：Hydra Alien Dovetail Plate L3（HDA-T02-L3）*1
4：Hydra Alien Dovetail Plate L4（HDA-T02-L4）*1
5：Hydra Alien Dovetail Connector Plate（HDA-T02-DCP）*1
6：Hydra Alien Large Suction Cup（HDA-T02-LSC）*1
7: Hydra Alien Small Suction Cup（HDA-T02-SSC）*2
8：Hydra Alien Shock Absorbing Arm with Hydraulic Damping Pole（HDA-T02-SAA）*1
9：Power Supply Base Plate for RS 2 with power cable（TGA-PBP）*1
10：220g Counterweight（TGA-CW-220）*8pcs
11：Hydra Alien Cable Clamp Suction Cup（HDA-T02-CSC）*1set（10pcs/set）
12：Hydra Alien Tool Kit（HDA-T02-TK）*1
13：Safety Belt（219-000000-089）*1
14：Hydra Dual Battery Plate Cradle Head – V Mount（HDA-BCH-V）*1
1：Hydra Alien V-Mount Battery Plate(HDA-T02-BP-V)*2
2：Hydra Alien 90 Degree Adapter for Shock Absorbing Head（HDA-T02-ASA）*1
3: Hydra Alien Shock Absorbing Head（HDA-T02-SAH）*1
4：Hydra Alien Dual Battery Plate Support Bracket（HDA-T02-DPS）*1 are included
15：Hydra Alien Car Mounting Hard Shell Waterproof Safety Case（HDA-T02-WSC）*1
16：Hydra Alien Monitor Bracket（HDA-T02-MB）*1
17：Remote Control Handle for RS 2/Ronin S（TGA-RCH）*1
18：Remote Control Receiver Module for RS 2（TGA-RCR）*1
19：6-Pin Lemo to 6-Pin Lemo Cable（500 cm) (TCB-6LE-6LE-500)*1
Gold Mount
1：Hydra Alien Dovetail Plate L1（HDA-T02-L1）*1
2：Hydra Alien Dovetail Plate L2（HDA-T02-L2）*1
3： Hydra Alien Dovetail Plate L3（HDA-T02-L3）*1
4：Hydra Alien Dovetail Plate L4（HDA-T02-L4）*1
5：Hydra Alien Dovetail Connector Plate（HDA-T02-DCP）*1
6：Hydra Alien Large Suction Cup（HDA-T02-LSC）*1
7: Hydra Alien Small Suction Cup（HDA-T02-SSC）*2
8：Hydra Alien Shock Absorbing Arm with Hydraulic Damping Pole（HDA-T02-SAA）*1
9：Power Supply Base Plate for RS 2 with power cable（TGA-PBP）*1
10：220g Counterweight（TGA-CW-220）*8pcs
11：Hydra Alien Cable Clamp Suction Cup（HDA-T02-CSC）*1set（10pcs/set）
12：Hydra Alien Tool Kit（HDA-T02-TK）*1
13： Safety Belt（219-000000-089）*1
14：Hydra Dual Battery Plate Cradle Head – Gold Mount（HDA-BCH-AB）*1
1：Hydra Alien Gold Mount Battery Plate(HDA-T02-BP-AB)*2
2：Hydra Alien 90 Degree Adapter for Shock Absorbing Head（HDA-T02-ASA）*1
3: Hydra Alien Shock Absorbing Head（HDA-T02-SAH）*1
4：Hydra Alien Dual Battery Plate Support Bracket（HDA-T02-DPS）*1 are included
15：Hydra Alien Car Mounting Hard Shell Waterproof Safety Case（HDA-T02-WSC）*1
16：Hydra Alien Monitor Bracket（HDA-T02-MB）*1
17：Remote Control Handle for RS 2/Ronin S（TGA-RCH）*1
18：Remote Control Receiver Module for RS 2（TGA-RCR）*1
19：6-Pin Lemo to 6-Pin Lemo Cable（500 cm) (TCB-6LE-6LE-500)*1
Dimensions: 35 x 17 x 10 inches
Weight: 44 lbs
Net Weight: 14.5 lbs
Materials: Aluminum alloy, stainless steel
Color: Black

The Hydra Alien Monitor Bracket allows you to easily monitor your shot, pull focus on your lens, and have full control over your RS 2 gimbal all in one ergonomic, compact setup.
The Bracket includes a NATO Rail Mount on the left side that supports both the Nucleus Nano Hand Unit and Dual Channel Wireless Lens Control Handle for Advanced Ring Grip.
The Rosette Mount on the right side allows you to mount the RS 2 Remote Control Handle or any other handle that connects via Rosette.
The clamp in the middle allows you to mount your smartphone or small monitor with a height of 89mm or smaller.
An integrated V-Mount Plate and 1/4″-20 threads allow you to mount and power any other additional accessories.

Hydra-Arm Mini is the ultimate cinema camera car crane. Complex vehicle mounted cinematography is now more within reach for filmmakers than ever before.
The system is portable, lightweight, and relatively easy to use for filming vehicles from multiple angles while in movement.
Designed specifically for the RS 3 PRO and RS 2, but compatible with a range of gimbals and camera systems such as the Ronin 4D, Ronin MX, Freefly Movi Pro.
The lightweight, counterweight-free design makes the system faster to set up and safer to operate as users will only need to focus on one end of the arm at any given time.
The Pro Kit includes suction cups, speed rail and ratchet straps allow you to mount the system easily to most vehicles that can support the 176lb weight of the arm not including a gimbal or camera.
The Basic Kit will be available in the near future without mounting hardware for users who already own 50mm Speed Rail or who are looking to build their own permanent mount.
There are optional suction cup kits for vehicles with various sized sunroofs including panoramic sunroofs and an optional Electronic Kit that allows users to monitor the suction cup pressure remotely for added safety.
The Shock Absorbing Arm helps stabilize the gimbal when operating on uneven surfaces and can be adjusted for various payloads.
The Shock Absorbing Head of the arm can be individually adjusted for both the horizontal and vertical axis.
The included Controller connects via a wired connection ensuring reliable communication to the arm.
The Controller gives the operator access to various options for the tilt and pan axis, including speed, dampening, and range of motion limitations for each axis individually.
Custom user settings allow the operator to select from a range of configurations so that they can operate in a way that is most comfortable to them.
Pro Mode is an expanded control option that allows users to control the Hydra Arm Mini and an RS2/RS3 Pro Gimbal simultaneously through the controller.
Please note this is not recommended for most shooting situations and is only advised with proper precautions.
The system can support speeds of up to 74 mph (120 km/h) in ideal conditions, but we recommend keeping speeds at or below 37 mph (60km/h) especially when using heavier cameras or lighter gimbals.
The primary factors that will impact operating speeds are camera weight, gimbal strength, and weather conditions.
Other gimbals can be used as well as long as they can be mounted via 1/4″-20 threads, powered via V-Mount batteries and stay within the 22lb weight limit.
The system includes a V-Mount Battery Plate mounted on the end of the arm which allows users to power their gimbal via the included P-Tap to 2 Pin Power Cable or with a different cable if needed.
*An optional Gold Mount Battery Plate will be available as an additional purchase in the near future.*
The arm itself does not have any power or video passthrough features meaning you will need to utilize a wireless video transmitter (not included) and power your camera via onboard batteries or the Gold/V-Mount battery plate found on the arm.
To power the system, you will need a 220V 1800wH+ power source which is NOT INCLUDED.
We recommend the EcoFlow Delta and a 110 to 220V Power Converter (3000W+) if needed. 
RETURN POLICY: This system  can be returned within 30 days, but will be subject to a 30% RESTOCKING FEE unless the system arrives defective.
Return shipping for non-defective units will not receive return labels.

The Predator Hard Shell Safety Case is designed to store and protect the Hydra Predator system while remaining lightweight and compact.

This allows you to safely transport the system between shooting locations and neatly store the system when it is not in use.

The waterproof design protects the case and equipment from hazards like rain and snow.