Camera rigs

This Monitor Bracket is designed to be mounted to the yoke of the Tilta Float in order to support the Wireless Thumb Controller for RS 2 and other accessories such as an external monitor.

This Bracket features a 1/4″-20 mounting point as well as two Cold Shoe Receivers, allowing you to mount an external monitor via our Cold Shoe Monitor Bracket.

This Cold Shoe Mounting Plate is adjustable, allowing you to position the monitor in a way that does not limit your range of motion when using the Float.

This Bracket functions as a replacement for the one included in the Tilta Float Handheld Gimbal Support System.

This next generation Side Handle is the ultimate option for powering various cameras and accessories via an internal battery with advanced power outputs.
Featuring a high-capacity internal battery, this handle delivers 60W PD output for longer operating time, up to 170% longer than the average camera’s internal battery.
The handle features Dual USB-C ports, one with PD quick charging protocol which allows the handle to charge or power a device with the maximum amount of power that the specific device can support.
The release lever allows for quick and precise adjustments to the handle’s angle which simplifies operating and creates a more efficient workflow.
The handle comes equipped with multiple mounting options, including a cold shoe receiver and a 1/4″-20 thread for mounting accessories like small articulating arms or external monitors.
The handle also features a wrist strap for added stability and a standard USB-C port for RUN/STOP control.
The high-grade metal construction and non-slip coverage provide increased security and comfortable handling.
Take your camera rig to the next level with the Tilta Left Side PD Handle, a powerful and ergonomic camera accessory designed to provide a seamless shooting experience.
NOTE: PD Quick Charging is NOT compatible with all cameras. Please confirm your camera’s compatibility before using this handle. 
AN INTERNAL CAMERA BATTERY IS REQUIRED TO UTILIZE PD POWER.

Cross design supports two standards with one baseplate. Compatible with Manfrotto and Arca standard quick release plates.
Highly durable. Compact and lightweight.
Custom-made handle extension and monitor extension cable for mounting DJI Ronin 4D.
ARRI standard rosettes for secure mounting. Compatible with the DJI Ronin 4D handgrip.
The coiled cable and cable clamp limit cable tension and protect the ports from damage.
Custom-made USB-C cable for connecting DJI Ronin 4D monitor.
*Compatible with most compact cinema cameras and DSLRs*
NOTE: The Manfrotto/ARCA Baseplate is designed for the included Tilta Quick Release Plate.
Some other Manfrotto/ARCA Quick Release Plates may be compatible, but cannot be guaranteed.
For more information on how to adjust the tension of the lever on your Baseplate, please contact: [email protected] 
Arm your camera with the Tilta Lightweight Shoulder Rig! This is the perfect solution for lightweight handheld camera operating.
The base of this rig features a Dual Manfrotto ARCA Baseplate, which allows you to use either systems’ quick release plate or the included two in one Manfrotto/ARCA Plate.
This baseplate can be removed when needed and other baseplates or dovetails can be mounted to the main plate of this shoulder rig via 1/4″-20 threads.
When used with our Tilta Standard Dovetail, you are able to quickly transition from a tripod or other support system to this lightweight shoulder rig.
The included velcro shoulder pad can also be independently adjusted, allowing for perfect balance of the camera system on your shoulder.
The adjustable, extendable rosette arms allow you to fine tune the length and angle of the hand grips for more comfortable operating in multiple positions.
The extension arms feature a 1/4″-20 thread on the arm itself, allowing you to mount an external monitor via an articulating arm.
This allows you to mount your monitor further away from you than would be possible when mounting to the camera body directly.
The rosette bridge can rotate a full 360 degrees, allowing for this rig to be quickly folded up for transportation.
The 15mm LWS Rod Mount on the back of the rig supports a pair of 15mm rods and rod based accessories such as various battery plates.
This helps provide power for your camera and balances the rig on your shoulder as it can shift the center of gravity closer to you which makes it easier and more comfortable to operate for longer periods of time.
In the back of the rig you will also find a NATO Rail which allows you to mount counter weights and other accessories via a small adapter plate.
This NATO Adapter will also allow you to mount the included Rear Shoulder Support Pad which provides an additional point of contact when operating.
 
 
 
1：Tilta Lightweight Shoulder Rig – Black（2.01.TA-LSR-B）*1
2：Tiltaing Rosette Handgrip – Black（2.01.TA-LSR-RH-B）*2 pcs
3：Tiltaing ARCA Manfrotto Dual Baseplate – Black（2.01.TA-SR-BSP-B）*1
4：Soft Carrying Case for Lightweight Shoulder Rig（2.01.TA-LSR-SCC）*1
Dimensions: 16.5 x 5.5 x 14 inches
Weight: 7.7 lbs
Materials: Aluminum alloy, stainless steel
Color: Black

The Tilta Rotatable Phone Mounting Bracket is the perfect accessory for seamlessly integrating your smartphone with your camera or support system.
Designed with versatility in mind, this Mounting Bracket offers exceptional flexibility with a tilt range of 180 degrees and the ability to rotate 360 degrees.
This bracket securely holds your smartphone in place via an adjustable clamp that accommodates devices between 60mm and 90mm wide.
This bracket also features silicone padding which not only shields your device from scratches, but enhances the grip strength of the clamp, resulting in a more secure connection.
It features additional mounting points for both cold shoe and 1/4″-20 based accessories, allowing you to attach a variety of compatible accessories and support.
The Tilta Rotatable Phone Mounting Bracket is the ultimate companion for any photographer or videographer looking to expand their rig’s functionality via their smartphone.
Upgrade your creative workflow and unlock new possibilities with this durable, adjustable, and feature-rich mounting solution.

This Universal SSD Drive Holder allows you to mount various styles of Solid State Drives to your camera cage in order to record externally.

The adjustable 1/4″-20 mounting screw provides more flexibility in terms of where you can mount your drive on your cage.
The integrated cable clamp ensures a secure connect between the cable and drive which will prevent accidental disconnections.
Compatible with most of our camera cages and many SSDs such as Samsung T5/T7 and SanDisk E61/E81.

The Tilta 15mm LWS Baseplate Type II (Black) easily slides onto the base of the Tiltaing half and full camera cages for Sharp 8K, Panasonic GH, Fuji XT3, Nikon Z6/Z7, Sony a6, and Sony a7/a9. It provides 15mm LWS rod holders to allow you attach rod-based accessories and is compatible with Tilta-standard dovetails.