Microphone Accessories
Showing 571–585 of 744 results
-
Microphone Accessories
Rycote Sennheiser Mke 400 Mini Windjammer
Sennheiser MKE 400 Mini Windjammer
Product Code: 055364
Suitable for Sennheiser MKE 400
Main Benefits:
- Record, interview or broadcast in any weather
The Mini Windjammer for the Sennheiser MKE 400 provides excellent wind isolation for capturing audio in high-wind environments. Made from high-quality synthetic fur specifically designed for wind isolation, easy-to-fit slip-on fur covers for use when recording outside with the built-in microphones found on portable cameras, external camera mics and handheld reporter microphones.
Some of our Mini Windjammers have 10 mm fur, while others have 25 mm Softie fur for use in more unsettled conditions, and can be fitted to a wide variety of devices.
Note: This Mini Windjammer is specifically designed for the Sennheiser MKE 400.
Compatibility – https://mymic.rycote.com/products/sennheiser-mke-400-mini-windjammer/#compatibility
MyMic – https://mymic.rycote.com/products/sennheiser-mke-400-mini-windjammer/
SKU: RYC-RY055364 -
Microphone Accessories
Rycote Single Duo-Lyre 68 (19/34) (With Stereo Risers)
Duo-Lyre 68 (19/34) (with stereo risers)
Product Code: 040138
Main Benefits:
- Second-to-none isolation against handling noise and vibrations
- Virtually unbreakable
- No elasticated parts — never sags or needs rethreading
The patented Lyre are extremely robust, and virtually unbreakable, as they do not use no elastic or rubber components which are prone to wear and tear. These completely backward compatible Lyre have replaced the original silicone O-rings suspension, and can be bought separately to upgrade older suspensions.
The different hardness’ can be easily identified by their new colour combinations. The lower the number, the softer the Shore hardness. So 62 shore is softer that 72 shore, and 82 shore is the stiffest we make. Shore Hardness Colour Combination 62 shore Black rigid part & Black Soft-grip 72 shore Black rigid part & Grey Soft-grip 82 shore Light Grey rigid part & Black Soft-grip
Shore Hardness Colour Combination
62 shore Black rigid part & Black Soft-grip
72 shore Black rigid part & Grey Soft-grip
82 shore Light Grey rigid part & Black Soft-gripSKU: RYC-RY040138 -
Microphone Accessories
Rycote Single Duo-Lyre 72 (19/34) (With Stereo Risers)
Duo-Lyre 72 (19/34) (with stereo risers)
Product Code: 040136
Main Benefits:
- Second-to-none isolation against handling noise and vibrations
- Virtually unbreakable
- No elasticated parts — never sags or needs rethreading
The patented Lyre are extremely robust, and virtually unbreakable, as they do not use no elastic or rubber components which are prone to wear and tear. These completely backward compatible Lyre have replaced the original silicone O-rings suspension, and can be bought separately to upgrade older suspensions.
The different hardness’ can be easily identified by their new colour combinations. The lower the number, the softer the Shore hardness. So 62 shore is softer that 72 shore, and 82 shore is the stiffest we make. Shore Hardness Colour Combination 62 shore Black rigid part & Black Soft-grip 72 shore Black rigid part & Grey Soft-grip 82 shore Light Grey rigid part & Black Soft-grip
Shore Hardness Colour Combination
62 shore Black rigid part & Black Soft-grip
72 shore Black rigid part & Grey Soft-grip
82 shore Light Grey rigid part & Black Soft-gripSKU: RYC-RY040136 -
Microphone Accessories
Rycote Single Square Black Mic Flag
Square Black Mic Flag
Product Code: 107301
A four-sided black, square mic flag, suitable for microphones with 19 to 38 mm diameters.
Main Benefits:
- Fits A Wide Range Of Microphones
- Lightweight But Tough
Rycote’s Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber ‘vanes’ secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.
Customising your mic flag in Australia & New Zealand
We suggest that you have your custom designs & logos printed on high-quality, hard-wearing, UV-resistant vinyl stickers, this helps to reduce glare and to be fixed directly onto the flag. Each square flag requires a minimum of four stickers, opposed to the triangular flags that require three stickers per flag. It’s also a good idea to get a few additional stickers printed at the same time.
Typically, we suggest for a quick and effective method of printing, you contact your printing company directly with the details above, that said if the stickers are required urgently most (just-in-time) franchised printing companies across Australia can assist with quick printing solutions. As always, please feel free to reach out if you have any further questions.
Fits A Wide Range Of Microphones
With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag.
Lightweight But Tough
Lightweight and extremely hard-wearing, Rycote’s Mic Flags provide a large printable area for sponsors’ logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm.
MIC FLAG BROCHURE – CLICK HERE
Compatibility – https://www.mymic.rycote.com/products/square-black-mic-flag/#compatibility
MyMic – https://www.mymic.rycote.com/products/square-black-mic-flag/
SKU: RYC-RY107301 -
Microphone Accessories
Rycote Single Square White Mic Flag
Square White Mic Flag
Product Code: 107307
A four-sided, white, square, mic flag, suitable for microphones with 19 to 38 mm diameters.
Main Benefits:
- Fits A Wide Range Of Microphones
- Lightweight But Tough
Rycote’s Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber ‘vanes’ secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.
Customising your mic flag in Australia & New Zealand
We suggest that you have your custom designs & logos printed on high-quality, hard-wearing, UV-resistant vinyl stickers, this helps to reduce glare and to be fixed directly onto the flag. Each square flag requires a minimum of four stickers, opposed to the triangular flags that require three stickers per flag. It’s also a good idea to get a few additional stickers printed at the same time.
Typically, we suggest for a quick and effective method of printing, you contact your printing company directly with the details above, that said if the stickers are required urgently most (just-in-time) franchised printing companies across Australia can assist with quick printing solutions. As always, please feel free to reach out if you have any further questions.
Fits A Wide Range Of Microphones
With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag.
Lightweight But Tough
Lightweight and extremely hard-wearing, Rycote’s Mic Flags provide a large printable area for sponsors’ logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm.
MIC FLAG BROCHURE – CLICK HERE
Compatibility – https://www.mymic.rycote.com/products/square-white-mic-flag/#compatibility
MyMic – https://www.mymic.rycote.com/products/square-white-mic-flag/
SKU: RYC-RY107307 -
Microphone Accessories
Rycote Single Triangular White Mic Flag
Triangular White Mic Flag
Product Code: 107308
A three-sided, white, triangular mic flag, suitable for microphone with 19 to 38 mm diameters.
Main Benefits:
- Fits A Wide Range Of Microphones
- Lightweight But Tough
Rycote’s Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber ‘vanes’ secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.
Customising your mic flag in Australia & New Zealand
We suggest that you have your custom designs & logos printed on high-quality, hard-wearing, UV-resistant vinyl stickers, this helps to reduce glare and to be fixed directly onto the flag. Each triangular flag requires a minimum of three stickers, opposed to the square flags that require four stickers per flag. It’s also a good idea to get a few additional stickers printed at the same time.
Typically, we suggest for a quick and effective method of printing, you contact your printing company directly with the details above, that said if the stickers are required urgently most (just-in-time) franchised printing companies across Australia can assist with quick printing solutions. As always, please feel free to reach out if you have any further questions.
Fits A Wide Range Of Microphones
With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag.
Lightweight But Tough
Lightweight and extremely hard-wearing, Rycote’s Mic Flags provide a large printable area for sponsors’ logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm.
MIC FLAG BROCHURE – CLICK HERE
Compatibility – https://www.mymic.rycote.com/products/triangular-white-mic-flag/#compatibility
MyMic – https://www.mymic.rycote.com/products/triangular-white-mic-flag/
SKU: RYC-RY107308 -
Microphone Accessories
Rycote Small Mini Windjammer
Small Standard Mini Windjammer
Product Code: 055301
Suitable for camera-mounted mics, for use over a foam windshield of 30 mm diameter and 30 mm long
Main Benefits:
- Record, interview or broadcast in any weather
The Mini Windjammer suitable for use over a foam windshield of 30 x 30mm, provides excellent wind isolation for capturing audio in high-wind environments. Made from high-quality synthetic fur specifically designed for wind isolation, easy-to-fit slip-on fur covers for use when recording outside with the built-in microphones found on portable cameras, external camera mics and handheld reporter microphones.
Some of our Mini Windjammers have 10mm fur, while others have 25mm Softie fur for use in more unsettled conditions, and can be fitted to a wide variety of devices.
Note: Specifically designed for use over a foam windshield of 30 mm diameter and 30 mm long
Compatibility – https://mymic.rycote.com/products/small-standard-mini-windjammer/#compatibility
MyMic – https://mymic.rycote.com/products/small-standard-mini-windjammer/
SKU: RYC-RY055301 -
Microphone Accessories
Rycote Softie Duo-Lyre Mount W/Cca
InVision Softie Lyre Mount CCA
Product Code: 037306
Suitable for shotgun microphones from 19-25 mm in diameter
Main Benefits:
- Excellent isolation against lens motor noise and general handling noise
- Allows you to attach a shotgun or rifle mics to many Sony & Canon models via the CCA
The Softie Lyre Mount with Camera Clamp Adaptor (CCA) allows you to attach a shotgun or rifle microphone to camcorders fitted with a microphone clamp (25 to 27mm diameter) or a boom pole with 3/8″ thread.
The clip is designed to hold shotgun microphones from 19 to 25mm in diameter, included the slab sided Sennheiser MKH range. A “Soft feel” grip is moulded into the clip, to prevent the microphone twisting or slipping.
Suitable for many Sony & Canon models, the Softie Lyre Mount uses the patented Lyre technology and provides excellent isolation against lens motor noise and general handling noise.
For customers requiring an on-camera mount, by either hot shoe or ¼” thread, please see our InVision Video range which uses an identical Lyre mount.
Tech Specs
Suitable for shotgun microphones from 19-25 mm in diameter
Compatibility – https://mymic.rycote.com/products/invision-softie-lyre-mount-cca-/#compatibility
MyMic – https://mymic.rycote.com/products/invision-softie-lyre-mount-cca-/
SKU: RYC-RY037306 -
Microphone Accessories
Rycote Softie Duo-Lyre Mount W/Mhr
InVision Softie Lyre Mount MHR
Product Code: 037324
Suitable for shotgun microphones from 19-25 mm in diameter
Main Benefits:
- Virtually indestructible
- Offers much improved isolation from camera noise compared to other on-camera microphone mounts
- No elasticated parts — never sags or needs rethreading
Although many camcorders have built-in or add-on microphone holders or clamps allowing users to attach high-quality shotgun or rifle mics to their camcorders, these are susceptible to camera and general handling noise, and do little or nothing to attenuate vibrations passing through connected video and microphone cables. The new Softie Lyre Mount with MHR replaces built-in or accessory camera mounts or clamps, and is supplied with three sets of metric screws (20mm-long M2.5, M3 and M4 types), allowing the mount to be connected directly to many common camcorders, such as the Panasonic DVX-series, Sony NXCAM, DSR, HVR, PMW and HDR-series, and many Canon X-series models.
The mic clip, based on Rycote’s established and patented Lyre technology, accommodates mics from 19 to 25mm in diameter and up to 300mm in length (including the slab-sided Sennheiser MKH range). The virtually indestructible W-shaped Lyre clips are made of hard-wearing, heat-resistant thermoplastic, and do not perish like elastic suspension systems. In the Softie Lyre Mount, they dramatically reduce the effects of the unwanted vibrations that can reach the mic capsule in undamped mic suspensions and are heard as noise, whines or low-frequency thumps. On a camcorder, the Softie Lyre Mount is particularly effective at reducing or eliminating lens motor and cable-borne noise. The mount can be rotated and tilted freely on any axis, and may be stored in bags with a mic still fitted. The mount can also be removed quickly should it be required, leaving the MHR in place on the camcorder.
Tech Specs
Suitable for shotgun microphones from 19-25 mm in diameter
Compatibility – https://mymic.rycote.com/products/invision-softie-lyre-mount-mhr/#compatibility
MyMic – https://mymic.rycote.com/products/invision-softie-lyre-mount-mhr/
SKU: RYC-RY037324 -
Microphone Accessories
Rycote Softie Duo-Lyre Mount W/Pg Handle
InVision Softie Lyre Mount with Pistol Grip
Product Code: 033702
Suitable for shotgun microphones from 19-34 mm in diameter.
Main Benefits:
- High quality shock-mounting for an affordable price
The InVision Softie Lyre Mount uses the Lyre system to provide complete isolation against handling and cable-borne noises. The Mount is supplied either with a lightweight Pistol-grip handle. Together the suspensions and the handle provides a quick, simple, robust and cost effective shock-mount for the tough environment of modern day ENG and location recording.
This universal shock-mount has a soft-feel grip moulded into the clip which securely holds the microphone, preventing any slipping or twisting. The Lyre are extremely robust, and virtually unbreakable, as they do not use elastic or rubber components that are prone to wear and tear.
The Pistol-grip has an added element of versatility having a 3/8″ thread fitting for use with a boom pole. For customers who require an on-camera mount, by either hot shoe or ¼” thread, please see our InVision Video range which uses an identical Lyre mount.
Tech Specs
Suitable for shotgun microphones from 19-34 mm in diameter
Net Weight (kg): 0.28
Gross Weight (kg): 0.36
Width: 70mm
Length: 60mm
Height: 65mmAn InVision set contains two Lyre, an appropriate length mounting bar, and in some cases, a reducing sleeve (InVision INV-4). The Lyre suspension webs of our InVision come in two sizes: – InVision Lyre width: 43 mm – Standard Lyre width: 70 mm Mounting bars come in two sizes: – Standard length: 25 mm – Large length: 70 mm The reducing sleeve allows for smaller microphones (e.g. Schoeps CCM series) to be held by the Lyre.
Compatibility – https://mymic.rycote.com/products/invision-softie-lyre-mount-with-pistol-grip/#compatibility
MyMic – https://mymic.rycote.com/products/invision-softie-lyre-mount-with-pistol-grip/
SKU: RYC-RY033702
