Microphone Accessories

Triangular Black Mic Flag

Product Code: 107302

A three-sided, black, triangular mic flag, suitable for microphone with 19 to 38 mm diameters.

Main Benefits:

• Fits A Wide Range Of Microphones
• Lightweight But Tough

Rycote’s Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber ‘vanes’ secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.

Customising your mic flag in Australia & New Zealand

We suggest that you have your custom designs & logos printed on high-quality, hard-wearing, UV-resistant vinyl stickers, this helps to reduce glare and to be fixed directly onto the flag. Each triangular flag requires a minimum of three stickers, opposed to the square flags that require four stickers per flag. It’s also a good idea to get a few additional stickers printed at the same time.

Typically, we suggest for a quick and effective method of printing, you contact your printing company directly with the details above, that said if the stickers are required urgently most (just-in-time) franchised printing companies across Australia can assist with quick printing solutions. As always, please feel free to reach out if you have any further questions.

Fits A Wide Range Of Microphones

With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag.

Lightweight But Tough

Lightweight and extremely hard-wearing, Rycote’s Mic Flags provide a large printable area for sponsors’ logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm.

Grey Undercovers Pack Of 30 Uses

Product Code: 065102

Suitable for Lavalier Mics

Main Benefits:

• Mount Lavalier mics silently under clothing for on-camera interview

Undercovers have been specifically designed for use with Lavalier mics under clothing.

Using Stickies to affix the microphone, a soft fabric disc is then added on top to minimise the sounds of clothing rustle and low wind noise.

Undercover Packs contain Stickies and fabric discs, and are available in white, grey and black colours.

Tech Specs

Dimensions
Width: 20 mm
Length: 25 mm

Suitable for
Microphone Diameters: 4.5 mm
Microphone Length (up to): 15 mm
Maximum Wind-noise Attenuation: 10 dB

Dimensions Width: 20 mm Length: 25 mm Suitable for Microphone Diameters: 4.5 mm Microphone Length (up to): 15 mm Maximum Wind-noise Attenuation: 10 dB

M58/SM58/MCE82 Mini Windjammer

Product Code: 055318

Suitable for M58/SM58/MCE82

Main Benefits:

• Using both foam and windjammer together provides up to 20dB wind and pop
• Excellent resistance to moisture and UV light from the durable, high quality open-cell acoustic foam
• The Windjammer offers a further 12 dB wind noise attenuation

The Mini Windjammer for the M58 / SM58 / MCE82 provides excellent wind isolation for capturing audio in high-wind environments. Made from high-quality synthetic fur specifically designed for wind isolation,  easy-to-fit slip-on fur covers for use when recording outside with the built-in microphones found on portable cameras, external camera mics and handheld reporter microphones.

Some of our Mini Windjammers have 10 mm fur, while others have 25 mm Softie fur for use in more unsettled conditions, and can be fitted to a wide variety of devices.

Note: This Mini Windjammer is specifically designed for the M58 / SM58 / MCE82.

White Lavalier Windjammer (Pair)

Product Code: 065503

Suitable for use with Lavalier Mic Foams

Main Benefits:

• High-level protection against wind noise for lavalier mics in the open air
• Reduces lavalier microphone noise and clothes rustle

Designed for use with Lavalier microphones worn on the outside of clothing, the Lavalier Windjammer (or Furry) is the most heavy-duty of Rycote’s subminiature Lavalier microphone products. It is suitable for use in windy outdoor interview conditions, and greatly reduces microphone noise and clothes rustle, while also providing effective wind protection. The Lavalier Windjammer comes in a range of black, grey, and white as standard. Other colours are also available on request to allow you to select the right match for your chosen piece of clothing.

Tech Specs

Dimensions
Width: 40 mm
Length: 40 mm
Height: 30 mm

Suitable for
Microphone Diameters: 4.5 mm
Microphone Length (up to): 15 mm
Maximum Wind-noise Attenuation: 12 dB

White Ristretto Lavalier Windjammer (Single)

Product Code: 065557

Suitable for use with Lavalier Mic Foams

Main Benefits:

• High-level protection against wind noise for lavalier mics in the open air
• Reduces lavalier microphone noise and clothes rustle

Windjammer RØDE Blimp

Product Code: 021563

 Main Benefits:

• Specially designed for the purpose – our Windjammer® give the most effective wind-noise protection available
• Secure and snug fitting, using a draw-string and toggle
• First introduced and invented by Rycote in 1987, we are the original makers of first-class Windjammer

The Windjammer first introduced by Rycote is a high quality synthetic fur-cover, which provides the highest possible protection against extreme wind-noise. When using a Windjammer fitted over a Windshield up to 50 dB of wind-noise attenuation can be achieved, producing excellent standard audio recordings.

Each Windjammer fits one size of windshield, and comes supplied in every Modular Windshield Kit. Windjammer is also available in sizes to fit Stereo Windshields, Softies & BBGs, please see their relevant product family for details.

The Windjammer is made from materials which are specially designed and manufactured for the purpose, and as a result has virtually no adverse effect on High-Frequency. To be totally effective it is important that the pile of the Windjammer remains in prime condition, so each is supplied with a fold flat hairbrush for ongoing maintenance.
Standard Windjammer is fitted with a drawstring and toggle to allow snug and easy fitting, however some users prefer the zipped version which are available on request.

Tech Specs

Finding the correct Windjammer will depend on your Windshield. Each Windjammer is designed to fit over it’s corresponding Windshield, for example a Windjammer 1 will fit over a Windshield 1 etc.

Because the Windjammer is most effective when fitted tightly, their approximate length is 50mm longer than their corresponding Windshield.