Microphone Accessories
Showing 421–435 of 602 results
-
Microphone Accessories
Rycote Rode Video Mic Pro Mini Windjammer
Rode Video Mic Pro Mini Windjammer
Product Code: 055409
Suitable for Rode Video Mic Pro
Main Benefits:
- Record, interview or broadcast in any weather
The Mini Windjammer for the Røde Video Mic Pro provides excellent wind isolation for capturing audio in high-wind environments. Made from high-quality synthetic fur specifically designed for wind isolation, easy-to-fit slip-on fur covers for use when recording outside with the built-in microphones found on portable cameras, external camera mics and handheld reporter microphones.
Some of our Mini Windjammers have 10 mm fur, while others have 25 mm Softie fur for use in more unsettled conditions, and can be fitted to a wide variety of devices.
Note: This Mini Windjammer is specifically designed for the Røde Video Mic Pro
Compatibility – https://mymic.rycote.com/products/rode-video-mic-pro-mini-windjammer/#compatibility
MyMic – https://mymic.rycote.com/products/rode-video-mic-pro-mini-windjammer/
SKU: RYC-RY055409 -
Microphone Accessories
Rycote Rode Videomic (Original & Lyre) Mini Windjammer
Rode VideoMic (Original & Lyre) Mini Windjammer
Product Code: 055459
Suitable for the Rode VideoMic (Original & Lyre)
Main Benefits:
- Record, interview or broadcast in any weather
The Mini Windjammer for the Røde VideoMic Original with Rycote lyre onboard provides excellent wind isolation for capturing audio in high-wind environments. Made from high-quality synthetic fur specifically designed for wind isolation, easy-to-fit slip-on fur covers for use when recording outside with the built-in microphones found on portable cameras, external camera mics and handheld reporter microphones.
Some of our Mini Windjammers have 10 mm fur, while others have 25 mm Softie fur for use in more unsettled conditions, and can be fitted to a wide variety of devices.
Note: This Mini Windjammer is specifically designed for the Røde VideoMic Original with Rycote lyre onboard.
Compatibility – https://mymic.rycote.com/products/rode-videomic-original-lyre-mini-windjammer/#compatibility
MyMic – https://mymic.rycote.com/products/rode-videomic-original-lyre-mini-windjammer/
SKU: RYC-RY055459 -
Microphone Accessories
Rycote Rode Videomic Go Miniwindjammer
Rode Videomic Go MiniWindjammer
Product Code: 055455
Suitable for Rode Videomic Go
Main Benefits:
- Record, interview or broadcast in any weather
The Mini Windjammer for the Røde Video Mic GO provides excellent wind isolation for capturing audio in high-wind environments. Made from high-quality synthetic fur specifically designed for wind isolation, easy-to-fit slip-on fur covers for use when recording outside with the built-in microphones found on portable cameras, external camera mics and handheld reporter microphones.
Some of our Mini Windjammers have 10 mm fur, while others have 25 mm Softie fur for use in more unsettled conditions, and can be fitted to a wide variety of devices.
Note: This Mini Windjammer is specifically designed for the Røde Video Mic GO.
Compatibility – https://mymic.rycote.com/products/rode-videomic-go-miniwindjammer/#compatibility
MyMic – https://mymic.rycote.com/products/rode-videomic-go-miniwindjammer/
SKU: RYC-RY055455 -
Microphone Accessories
Rycote Roland R-26 Mini Windjammer
Roland R-26 Mini Windjammer
Product Code: 055419
Suitable for Roland R-26
Main Benefits:
- Blog, interview or podcast in any weather
- Available for over a dozen types of recorder, mono or stereo
Rycote’s Mini Windjammer range has expanded tremendously in recent years with the introduction of compact slip-on fur Windjammer for the growing numbers of portable handheld digital recorders, as used by journalists, podcasters and broadcasters everywhere. These devices are now available in such a range of shapes, sizes and types (mono and stereo), that slightly different custom Windjammer designs are needed for each one; over a dozen types are currently available.
If you want to make professional-quality recordings outdoors for TV, radio or film use on a handheld recorder, get yourself one of our Mini Windjammer.
Compatibility – https://mymic.rycote.com/products/roland-r-26-mini-windjammer/#compatibility
MyMic – https://mymic.rycote.com/products/roland-r-26-mini-windjammer/
SKU: RYC-RY055419 -
Microphone Accessories
Rycote Sc-08 Stereo Pair Super Cardioid Microphone
The Rycote SC-08 (Stereo Pair) is a pair of supercardioid pencil condenser microphones designed for a range of applications in studio and field recording.
The SC-08 microphones provide directionality with a virtually flat frequency response from 70Hz-20KHz, moderately dropping off below 60Hz. The mics are built on Rycote’s low self-noise preamp design and capsules which offer a consistent sonic signature that mixes well when cut together with other Rycote microphones in the range. The SC-08 mics can be used individually or in matched stereo pairs.
FEATURES
Capsule:
• Professional broadcast quality and individually fine-tuned back electret capsule
• Virtually flat frequency response from 70Hz to 20KHz
Preamp:
• Compact design
• Ultra low noise circuitry
• Sophisticated RF shielding
• Low power consumption
Connector:
• Gold-plated Neutrik XLR connector
RF-Protection:
• Active in-line filtering
• Fine-tuned mechanical RF shielding
• Thoroughly tested against digital wireless systems and walkie talkies
Materials:
• Preamp made from non-corrosive machined brass – low impedance to ensure best possible and longest lasting RF shielding
• Capsule made from lightweight machined aluminiumItems included in delivery:
• 2 x SC-08 Microphone
• 1 x Microphone hard case
• 2 x Microphone clamp
• 2 x Microphone foamPRODUCT CODE: RYC079007
SPECIFICATIONS PER MICROPHONE:
Frequency Range: 60 Hz – 20 kHz
Self Noise: 12.0 dB-A (+/- 2 dB)
Polar Pattern: Super-Cardioid
Capsule Type: Back Electret Condenser
Output Sensitivity: 29.7 mV/Pa (-26.9 dB)
Max. Output Voltage: 4 Vp
Output Impedance: 100 Ω
Min. Load Impedance: 1 k Ω
Signal / Noise Ratio: 81 dB typical (@ 1 kHz/Pa A-weighted)
CMRR (@ 1 kHz): > 60 dB
Max. Cable Length: 100 m
Powering: P-48
Powering Valid Range: 48-24V (Max SPL reduced at 24V)
Current Consumption: 3.0 mA
Max. SPL: 133 dB SPL (at 1 kHz 1.0% THD Typical) 127 dB SPL (at 1 kHz 0.5% THD Typical)
RFI Shield: Yes
Connector: XLR-3M
Weight: 69 g
Colour: Matte BlackCOMPATIBLE RYCOTE WINDSHIELDS
• 5cm SGM Foam
• 5cm Classic Softie
• 5cm Short Fur Softie
• 5cm Super Softie
• Nano Shield Kit NS1-BA
• Cyclone Windshield, Small
• Modular Windshield WS 10 Kit
• Baseball 19/20mmSKU: RYC-RYC079007 -
Microphone Accessories
Rycote Sc-08 Super Cardioid Microphone
The Rycote SC-08 is a supercardioid pencil condenser microphone designed for a range of applications in studio and field recording.
The SC-08 microphones provide directionality with a virtually flat frequency response from 70Hz-20KHz, moderately dropping off below 60Hz. The mics are built on Rycote’s low self-noise preamp design and capsules which offer a consistent sonic signature that mixes well when cut together with other Rycote microphones in the range. The SC-08 mics can be used individually or in matched stereo pairs.
FEATURES
Capsule:
• Professional broadcast quality and individually fine-tuned back electret capsule
• Virtually flat frequency response from 70Hz to 20KHz
Preamp:
• Compact design
• Ultra low noise circuitry
• Sophisticated RF shielding
• Low power consumption
Connector:
• Gold-plated Neutrik XLR connector
RF-Protection:
• Active in-line filtering
• Fine-tuned mechanical RF shielding
• Thoroughly tested against digital wireless systems and walkie talkies
Materials:
• Preamp made from non-corrosive machined brass – low impedance to ensure best possible and longest lasting RF shielding
• Capsule made from lightweight machined aluminiumItems included in delivery:
• 1 x SC-08 Microphone
• 1 x Microphone hard case
• 1 x Microphone clamp
• 1 x Microphone foamPRODUCT CODE: RYC079004
SPECIFICATIONS:
Frequency Range: 60 Hz – 20 kHz
Self Noise: 12.0 dB-A (+/- 2 dB)
Polar Pattern: Super-Cardioid
Capsule Type: Back Electret Condenser
Output Sensitivity: 29.7 mV/Pa (-26.9 dB)
Max. Output Voltage: 4 Vp
Output Impedance: 100 Ω
Min. Load Impedance: 1 k Ω
Signal / Noise Ratio: 81 dB typical (@ 1 kHz/Pa A-weighted)
CMRR (@ 1 kHz): > 60 dB
Max. Cable Length: 100 m
Powering: P-48
Powering Valid Range: 48-24V (Max SPL reduced at 24V)
Current Consumption: 3.0 mA
Max. SPL: 133 dB SPL (at 1 kHz 1.0% THD Typical) 127 dB SPL (at 1 kHz 0.5% THD Typical)
RFI Shield: Yes
Connector: XLR-3M
Weight: 69 g
Colour: Matte Black
COMPATIBLE RYCOTE WINDSHIELDS
• 5cm SGM Foam
• 5cm Classic Softie
• 5cm Short Fur Softie
• 5cm Super Softie
• Nano Shield Kit NS1-BA
• Cyclone Windshield, Small
• Modular Windshield WS 10 Kit
• Baseball 19/20mmSKU: RYC-RYC079004 -
Microphone Accessories
Rycote Sennheiser Mke 400 Mini Windjammer
Sennheiser MKE 400 Mini Windjammer
Product Code: 055364
Suitable for Sennheiser MKE 400
Main Benefits:
- Record, interview or broadcast in any weather
The Mini Windjammer for the Sennheiser MKE 400 provides excellent wind isolation for capturing audio in high-wind environments. Made from high-quality synthetic fur specifically designed for wind isolation, easy-to-fit slip-on fur covers for use when recording outside with the built-in microphones found on portable cameras, external camera mics and handheld reporter microphones.
Some of our Mini Windjammers have 10 mm fur, while others have 25 mm Softie fur for use in more unsettled conditions, and can be fitted to a wide variety of devices.
Note: This Mini Windjammer is specifically designed for the Sennheiser MKE 400.
Compatibility – https://mymic.rycote.com/products/sennheiser-mke-400-mini-windjammer/#compatibility
MyMic – https://mymic.rycote.com/products/sennheiser-mke-400-mini-windjammer/
SKU: RYC-RY055364 -
Microphone Accessories
Rycote Single Duo-Lyre 68 (19/34) (With Stereo Risers)
Duo-Lyre 68 (19/34) (with stereo risers)
Product Code: 040138
Main Benefits:
- Second-to-none isolation against handling noise and vibrations
- Virtually unbreakable
- No elasticated parts — never sags or needs rethreading
The patented Lyre are extremely robust, and virtually unbreakable, as they do not use no elastic or rubber components which are prone to wear and tear. These completely backward compatible Lyre have replaced the original silicone O-rings suspension, and can be bought separately to upgrade older suspensions.
The different hardness’ can be easily identified by their new colour combinations. The lower the number, the softer the Shore hardness. So 62 shore is softer that 72 shore, and 82 shore is the stiffest we make. Shore Hardness Colour Combination 62 shore Black rigid part & Black Soft-grip 72 shore Black rigid part & Grey Soft-grip 82 shore Light Grey rigid part & Black Soft-grip
Shore Hardness Colour Combination
62 shore Black rigid part & Black Soft-grip
72 shore Black rigid part & Grey Soft-grip
82 shore Light Grey rigid part & Black Soft-gripSKU: RYC-RY040138 -
Microphone Accessories
Rycote Single Duo-Lyre 72 (19/34) (With Stereo Risers)
Duo-Lyre 72 (19/34) (with stereo risers)
Product Code: 040136
Main Benefits:
- Second-to-none isolation against handling noise and vibrations
- Virtually unbreakable
- No elasticated parts — never sags or needs rethreading
The patented Lyre are extremely robust, and virtually unbreakable, as they do not use no elastic or rubber components which are prone to wear and tear. These completely backward compatible Lyre have replaced the original silicone O-rings suspension, and can be bought separately to upgrade older suspensions.
The different hardness’ can be easily identified by their new colour combinations. The lower the number, the softer the Shore hardness. So 62 shore is softer that 72 shore, and 82 shore is the stiffest we make. Shore Hardness Colour Combination 62 shore Black rigid part & Black Soft-grip 72 shore Black rigid part & Grey Soft-grip 82 shore Light Grey rigid part & Black Soft-grip
Shore Hardness Colour Combination
62 shore Black rigid part & Black Soft-grip
72 shore Black rigid part & Grey Soft-grip
82 shore Light Grey rigid part & Black Soft-gripSKU: RYC-RY040136 -
Microphone Accessories
Rycote Single Square Black Mic Flag
Square Black Mic Flag
Product Code: 107301
A four-sided black, square mic flag, suitable for microphones with 19 to 38 mm diameters.
Main Benefits:
- Fits A Wide Range Of Microphones
- Lightweight But Tough
Rycote’s Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber ‘vanes’ secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.
Customising your mic flag in Australia & New Zealand
We suggest that you have your custom designs & logos printed on high-quality, hard-wearing, UV-resistant vinyl stickers, this helps to reduce glare and to be fixed directly onto the flag. Each square flag requires a minimum of four stickers, opposed to the triangular flags that require three stickers per flag. It’s also a good idea to get a few additional stickers printed at the same time.
Typically, we suggest for a quick and effective method of printing, you contact your printing company directly with the details above, that said if the stickers are required urgently most (just-in-time) franchised printing companies across Australia can assist with quick printing solutions. As always, please feel free to reach out if you have any further questions.
Fits A Wide Range Of Microphones
With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag.
Lightweight But Tough
Lightweight and extremely hard-wearing, Rycote’s Mic Flags provide a large printable area for sponsors’ logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm.
MIC FLAG BROCHURE – CLICK HERE
Compatibility – https://www.mymic.rycote.com/products/square-black-mic-flag/#compatibility
MyMic – https://www.mymic.rycote.com/products/square-black-mic-flag/
SKU: RYC-RY107301
