Microphone Accessories
Showing 301–315 of 744 results
-
Microphone Accessories
Rycote Black Lavalier Windjammer – Single
Black Lavalier Windjammer
Product Code: 065514
Suitable for use with Lavalier Mic Foams
Main Benefits:
- High-level protection against wind noise for lavalier mics in the open air
- Reduces lavalier microphone noise and clothes rustle
Designed for use with Lavalier microphones worn on the outside of clothing, the Lavalier Windjammer (or Furry) is the most heavy-duty of Rycote’s subminiature Lavalier microphone products. It is suitable for use in windy outdoor interview conditions, and greatly reduces microphone noise and clothes rustle, while also providing effective wind protection. The Lavalier Windjammer comes in a range of black, grey, and white as standard.
Other colours are also available on request to allow you to select the right match for your chosen piece of clothing.
Tech Specs
Dimensions
Width: 40 mm
Length: 40 mm
Height: 30 mmSuitable for
Microphone Diameters: 4.5 mm
Microphone Length (up to): 15 mm
Maximum Wind-noise Attenuation: 12 dBCompatibility – https://mymic.rycote.com/products/black-lavalier-windjammer/#compatibility
MyMic – https://mymic.rycote.com/products/black-lavalier-windjammer/
SKU: RYC-RY065514 -
Microphone Accessories
Rycote Black Ristretto Lavalier Windjammer – Pair
Black Ristretto Lavalier Windjammer (Single)
Product Code: 065552
Suitable for use with Lavalier Mic Foams
Main Benefits:
- High-level protection against wind noise for lavalier mics in the open air
- Reduces lavalier microphone noise and clothes rustle
SKU: RYC-RY065552 -
Microphone Accessories
Rycote Black Ristretto Lavalier Windjammer – Single
Black Ristretto Lavalier Windjammer (Single)
Product Code: 065555
Suitable for use with Lavalier Mic Foams
Main Benefits:
- High-level protection against wind noise for lavalier mics in the open air
- Reduces lavalier microphone noise and clothes rustle
SKU: RYC-RY065555 -
Microphone Accessories
Rycote Blue Lavalier Windjammer – Pair
Blue Lavalier Windjammer – Pair
Product Code: 065563
Suitable for use with Lavalier Mic Foams
Main Benefits:
- High-level protection against wind noise for lavalier mics in the open air
- Reduces lavalier microphone noise and clothes rustle
SKU: RYC-RY065563 -
-
Microphone Accessories
Rycote Brass Shoe Adaptor With 1/4-Inch Male Thread
Brass Shoe Adaptor with 1/4-inch male thread
Product Code: 037327
To mount any accessory with a female 1/4″ thread onto a camera hot shoe.
MyMic – https://mymic.rycote.com/products/brass-shoe-adaptor-with-1_4-inch-male-thread/
SKU: RYC-RY037327 -
Microphone Accessories
Rycote Ca-08 Cardioid Microphone
The Rycote CA-08 is a cardioid pencil condenser microphone designed for a range of applications in studio and field recording.
The CA-08 microphones provide slight directionality with a virtually flat frequency response from 70Hz-20KHz, gradually dropping off below 60Hz. The mics are built on Rycote’s low self-noise preamp design and capsules which offer a consistent sonic signature that mixes well when cut together with other Rycote microphones in the
range. The CA-08 mics can be used individually or in matched stereo pairs.FEATURES
Capsule:
• Professional broadcast quality and individually fine-tuned back electret capsule
• Virtually flat frequency response from 70Hz to 20KHzPreamp:
• Compact design
• Ultra low noise circuitry
• Sophisticated RF shielding
• Low power consumptionConnector:
• Gold-plated Neutrik XLR connectorRF-Protection:
• Active in-line filtering
• Fine-tuned mechanical RF shielding
• Thoroughly tested against digital wireless systems and walkie talkiesMaterials:
• Preamp made from non-corrosive machined brass – low impedance to ensure best possible and longest lasting RF shielding
• Capsule made from lightweight machined aluminiumItems included in delivery:
• 1 x CA-08 Microphone
• 1 x Microphone hard case
• 1 x Microphone clamp
• 1 x Microphone foamPRODUCT CODE: RYC079003
SPECIFICATIONS:
Frequency Range: 45 Hz – 20 kHz
Self Noise: 13.0 dB-A (+/- 2 dB)
Polar Pattern: Cardioid
Capsule Type: Back Electret Condenser
Output Sensitivity: 24.3 mV/Pa (-26.9 dB)
Max. Output Voltage: 4 Vp
Output Impedance: 100 Ω
Min. Load Impedance: 1 k Ω
Signal / Noise Ratio: 80 dB typical (@ 1 kHz/Pa A-weighted)
CMRR (@ 1 kHz): > 60 dB
Max. Cable Length: 100 m
Powering: P-48
Powering Valid Range: 48-24V (Max SPL reduced at 24V)
Current Consumption: 3.0 mA
Max. SPL: 133 dB SPL (at 1 kHz 1.0% THD Typical) 127 dB SPL (at 1 kHz 0.5% THD Typical)
RFI Shield: Yes
Connector: XLR-3M
Weight: 69 g
Colour: Matte BlackCOMPATIBLE RYCOTE WINDSHIELDS
• 5cm SGM Foam
• 5cm Classic Softie
• 5cm Short Fur Softie
• 5cm Super Softie
• Nano Shield Kit NS1-BA
• Cyclone Windshield, Small
• Modular Windshield WS 10 Kit
• Baseball 19/20mmSKU: RYC-RYC079003 -
Microphone Accessories
Rycote Ca-08 Stereo Pair Cardioid Microphone
The Rycote CA-08 (Stereo Pair) is a pair of cardioid pencil condenser microphones designed for a range of applications in studio and field recording.
The CA-08 microphones provide slight directionality with a virtually flat frequency response from 70Hz-20KHz, gradually dropping off below 60Hz. The mics are built on Rycote’s low self-noise preamp design and capsules which offer a consistent sonic signature that mixes well when cut together with other Rycote microphones in the
range. The CA-08 mics can be used individually or in matched stereo pairs.FEATURES
Capsule:
• Professional broadcast quality and individually fine-tuned back electret capsule
• Virtually flat frequency response from 70Hz to 20KHz
Preamp:
• Compact design
• Ultra low noise circuitry
• Sophisticated RF shielding
• Low power consumption
Connector:
• Gold-plated Neutrik XLR connector
RF-Protection:
• Active in-line filtering
• Fine-tuned mechanical RF shielding
• Thoroughly tested against digital wireless systems and walkie talkies
Materials:
• Preamp made from non-corrosive machined brass – low impedance to ensure best possible and longest lasting RF shielding
• Capsule made from lightweight machined aluminium
Items included in delivery:
• 2 x CA-08 Microphone
• 1 x Microphone hard case
• 2 x Microphone clamp
• 2 x Microphone foamPRODUCT CODE: RYC079006
SPECIFICATIONS PER MICROPHONE:
Frequency Range: 45 Hz – 20 kHz
Self Noise: 13.0 dB-A (+/- 2 dB)
Polar Pattern: Cardioid
Capsule Type: Back Electret Condenser
Output Sensitivity: 24.3 mV/Pa (-26.9 dB)
Max. Output Voltage: 4 Vp
Output Impedance: 100 Ω
Min. Load Impedance: 1 k Ω
Signal / Noise Ratio: 80 dB typical (@ 1 kHz/Pa A-weighted)
CMRR (@ 1 kHz): > 60 dB
Max. Cable Length: 100 m
Powering: P-48
Powering Valid Range: 48-24V (Max SPL reduced at 24V)
Current Consumption: 3.0 mA
Max. SPL: 133 dB SPL (at 1 kHz 1.0% THD Typical) 127 dB SPL (at 1 kHz 0.5% THD Typical)
RFI Shield: Yes
Connector: XLR-3M
Weight: 69 g
Colour: Matte BlackCOMPATIBLE RYCOTE WINDSHIELDS
• 5cm SGM Foam
• 5cm Classic Softie
• 5cm Short Fur Softie
• 5cm Super Softie
• Nano Shield Kit NS1-BA
• Cyclone Windshield, Small
• Modular Windshield WS 10 Kit
• Baseball 19/20mmSKU: RYC-RYC079006 -
Microphone Accessories
Rycote Cable, XLR-3m To Angled XLR-3f, 260mm
Cable, XLR-3m to Lightweight 90° XLR-3f, 260mm
Product Code: 042277
The Cyclone Windshield Kit is supplied with ultra-soft, flexible Mogami cable, fitted with gold pin Neutrik XX-series XLR connectors.
Output male XLR locked in angled position on lightweight boom adaptor, allowing internal or external pole cables and plug-on transmitters to be attached securely.
MyMic – https://mymic.rycote.com/products/cable-xlr-3m-to-lightweight-90-xlr-3f-260mm/
SKU: RYC-RY042277 -
Microphone Accessories
Rycote Camera Mic Clamp / Hot Shoe Adaptor
Camera Mic Clamp / Hot Shoe Adaptor
Product Code: 037319
The Camera Mic Clamp / Hot Shoe Adaptor allows shoe accessories to be mounted onto the camcorder microphone clamp.
Main Benefits:
- Allows for shoe accessories to be mounted on camcorder microphone clamp
MyMic – https://mymic.rycote.com/products/camera-mic-clamp-_-hot-shoe-adaptor/
SKU: RYC-RY037319 -
Microphone Accessories
Rycote Canon Xf 300/305 Mini Windjammer
Canon XF 300/305 Mini Windjammer
Product Code: 055412
Suitable for Canon XF 300/305
Main Benefits:
- Record, interview or broadcast in any weather
The Mini Windjammer for the Canon XF300 & XF305 provides excellent wind isolation for capturing audio in high-wind environments. Made from high-quality synthetic fur specifically designed for wind isolation, easy-to-fit slip-on fur covers for use when recording outside with the built-in microphones found on portable cameras, external camera mics and handheld reporter microphones.
Some of our Mini Windjammers have 10 mm fur, while others have 25 mm Softie fur for use in more unsettled conditions, and can be fitted to a wide variety of devices.
Note: This Mini Windjammer is specifically designed for the Canon XF300 & XF305.
Compatibility – https://mymic.rycote.com/products/canon-xf-300_305-mini-windjammer/#compatibility
MyMic – https://mymic.rycote.com/products/canon-xf-300_305-mini-windjammer/
SKU: RYC-RY055412 -
Microphone Accessories
Rycote Canon Xf100 Mini Windjammer
Canon XF100 Mini Windjammer
Product Code: 055417
Suitable for Canon XF100
Main Benefits:
- Record, interview or broadcast in any weather
The Mini Windjammer for the Canon XF100 provides excellent wind isolation for capturing audio in high-wind environments. Made from high-quality synthetic fur specifically designed for wind isolation, easy-to-fit slip-on fur covers for use when recording outside with the built-in microphones found on portable cameras, external camera mics and handheld reporter microphones.
Some of our Mini Windjammers have 10 mm fur, while others have 25 mm Softie fur for use in more unsettled conditions, and can be fitted to a wide variety of devices.
Note: This Mini Windjammer is specifically designed for the Canon XF100.
Compatibility – https://mymic.rycote.com/products/canon-xf100-mini-windjammer/#compatibility
MyMic – https://mymic.rycote.com/products/canon-xf100-mini-windjammer/
SKU: RYC-RY055417 -
Microphone Accessories
Rycote Classic Adaptor For Pcs-Boom W/ XLR Holder – (Fits Modular Windshield Kits)
Microphone AccessoriesRycote Classic Adaptor For Pcs-Boom W/ XLR Holder – (Fits Modular Windshield Kits)
Classic Adaptor for PCS-Boom Connector
The Classic Adaptor for PCS-Boom Connector (Connector not supplied), is the neatest, lightest and simplest way to integrate the Rycote Professional Connection System into your existing Rycote windshield kit. The Classic Adaptor replaces your kit’s existing boom adaptor and has a built-in, fixed PCS tip, along with a unique new XLR holder with 360° adjustability.
1 x Classic Adaptor for PCS-Boom Connector
1 x XLR Holder (pre-fitted)
Main Benefits:
Simplest way to integrate the Rycote PCS quick attachment/quick release functionality into your existing Rycote windshield kit
• Smaller and lighter – compared to using the existing boom adaptor with a separate 3/8” PCS Tip attached
• Built-in PCS tip means your windshield is always ‘PCS-ready’ and there’s one less moving/removable part to think about!
• With a fixed PCS tip, as opposed to threaded on, it is always in perfect alignment with the windshield kit itself
• Unique XLR holder which allows for 360 degree rotation, so you can easily choose & change where the XLR sits, relative to the mount
• XLR holder designed with a slight ‘kick angle’ to help better accommodate the use of plug-in transmitters at the end of the boom
• Compatible with Rycote Modular and Pre-Modular Windshield Kits; Super-Shield Kits; ‘Perfect For’ Windshield Kits; Classic-Softie® Kits and other Rycote mounts fitted with a boom adaptor (replacing the existing boom adaptor or pistol grip handle)
• Easy to fit
SKU: RYC-RY185807 -
Microphone Accessories
Rycote Connbox Cb1 (XLR-3f)
Connbox CB1 (XLR-3F)
Product Code: 016901
The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox CB1 hardwired (XLR-3F tail not detachable) and is suitable for mono microphones with a 3-pin XLR connector.
Main Benefits:
- Isolates and minimises handling and cable-borne noise
- Greatly improves audio quality of recordings
- A ready-to-use solution to connection problems
An effective and ready-to-use solution to connection problems, the Connbox will enable professional sound recorders to achieve clean, high quality audio recordings.
Acting as a transition connector and anchor point for the microphone tail, the lengths of cable are set to work perfectly with the microphone fitted in the windshield, without touching the internal surface of the basket. The soft cable then greatly reduces the transmission path of cable-borne noise, thus further reducing cable rumble.
The Connbox is made of the highest quality components, using Gold 3-pin Neutrik X-series XLR connectors, and an ultra soft Mogami star-quad cable.
Tech Specs
INPUT
Input connector: XLR -3F
Input Connbox Connector: Hardwired
Input Cable outside diameter: 2.5mm
Input Cable Exposed Length: 130mm
Input Cable Band Colour: PlainOUTPUT
Output Connector: XLR – 3M
Output Connbox Connector: Hardwired
Output Cable Outside Diameter: 4.8mm
Output Cable Exposed Length: 450mm
Output Cable Band Colour: PlainCompatibility – https://mymic.rycote.com/products/connbox-cb1-xlr-3f/#compatibility
MyMic – https://mymic.rycote.com/products/connbox-cb1-xlr-3f/
SKU: RYC-RY016901
