TecArt – Page 6

SKU: FGR-L18012DPB

Darkroom chemicals

Ilford Simplicity Film Developer Starter Pack

Darkroom chemicals

Ilford Simplicity Film Developer Starter Pack

Convenient, single-use sachets

Develops 2 x 35mm or 1 x 120 film

Designed for use in 2-reel, 600ml developing tanks

SKU: ILF-1178847

On light modifiers

Chimera Lantern Pancake Medium with skirt

On light modifiers

Chimera Lantern Pancake Medium with skirt

Writing instruments and correcting products

Chimera Pancake Lanterns features a flat-top design that allows the lightbank to be placed higher and closer to the ceiling. This maximizes placement options as well as limiting unwanted overhead bounce from the ceiling. Pancake Lanterns mount to any Chimera Speed Ring for Strobe or Video Pro lightbanks. Fixtures with a with beam angle or fully-exposed bulb/flash tube are recommended for proper illumination of the lantern.

The included skirt attaches to the Pancake Lantern to enable control over the light-spill. With adjustable zippers and velcro on all four sides, the skirt can be rolled up or down to vary light spread from an omnidirectional overhead source to a straight down-light.

Key Features
– Flat top design maximizes overhead space
– Full-diffusion body creates soft 180 degrees of illumination
– Durable high-heat construction

Product Specifications
– Diameter: 35 in / 89 cm
– Depth: 17 in / 43 cm
– Maximum Recommended Wattage: 1500W Continuous

SKU: CHI-1865

Staedtler 311-5 Lumocolour Pen Non-Permanent Superfine Green

Writing instruments and correcting products

Staedtler 311-5 Lumocolour Pen Non-Permanent Superfine Green

Universal pen for use on almost all surfaces. Suitable for overhead projection. Can be wiped off film using a damp cloth. Water-soluble ink. Fast-drying. PP barrel and cap guarantee long service life. Airplane-safe – automatic pressure equalization prevents pen from leaking on board aircraft. High colour brilliancy. Black is lightfast. Line width S – superfine, approx. 0.4 mm. Refillable with refill station 487 15. Housing made of 97% recycled plastic.

SKU: STA-311-5

Peak Design Mobile Motorcycle Mount 20mm Ball Adapter: Locking & Charging Black

Peak Design Mobile Motorcycle Mount 20mm Ball Adapter: Locking & Charging Black

Peak Design Mobile Motorcycle Mount 20mm Ball Adapter: Locking & Charging Black. Upgrade your 3rd party phone mount with the speed, strength, and streamlined form of Peak Design’s SlimLink mounting system. Features optional Qi2 wireless charging.

SKU: PEA-PD-M-MM-AG-BK-1

Microphone Accessories

Rycote 12cm Sgm Foam (19/22) (Single)

Microphone Accessories

Rycote 12cm Sgm Foam (19/22) (Single)

Up to 10 dB wind and pop noise attenuation with minimal high-frequency loss from this discreet, slip-on windshield

12cm SGM Foam (19/22)

Product Code: 104410

Suitable for shotgun microphones, with slots no further than 12 cm from the front of the mic.

Main Benefits:

Excellent resistance to moisture and UV light from the durable, high quality open-cell acoustic foam

The Shotgun Mic Foam is a discreet, slip-on foam windshield, designed to protect the microphone head against light wind and pop noise. Made of durable, high quality open-cell acoustic foam, these windshields offer up to 20 dB wind noise attenuation, whilst keeping high frequency loss to a minimum.

Engineered exclusively for Rycote, this high quality foam also provides excellent resistance against the damaging effects of moisture and UV light.

All our Shotgun Mic Foam Windshields can now also be fitted with an additional Rycote Foam Windjammer for a further 12 dB wind noise attenuation.

Compatibility – https://mymic.rycote.com/products/12cm-sgm-foam-19_22/#compatibility

MyMic – https://mymic.rycote.com/products/12cm-sgm-foam-19_22/

SKU: RYC-RY104410

Video and photo transmitters

Teradek Bolt 6 LT 750 TX/RX

Video and photo transmitters

Teradek Bolt 6 LT 750 TX/RX

3G-SDI/HDMI Transmitter & Receiver Set

Supports New 6 GHz Frequency Band

Transmits up to 228m Line of Sight

Supports up to 4K30 Resolution Input

3G-SDI/HDMI Inputs & Outputs

10-Bit 4:2:2 Support, No Delay

Compatible with Bolt 4K Series 5G TX/RX

AES-256 Encryption, 7 x Antennas

Bluetooth Mobile App, Spectrum Analyzer

SKU: TER-53.10-2260

SmallRig Attachable Filter Adapter (M-Mount) 67mm 4587

SmallRig Attachable Filter Adapter (M-Mount) 67mm 4587

Designed for use with SmallRig’s iPhone series cages.

The integration of a 67mm magnetic filter attachment is attainable on the SmallRig?s mobile video cage or lens backplane equipped with an M-mount.

Featuring a magnetic attachment system, it allows for quick installation and filter swapping.

Designed with a rotational stop feature to accommodate SmallRig?s magnetic filters with rotational stop functionality.

Comes with a magnetic adapter ring, which enables universal compatibility for attaching 67mm threaded filters.

SKU: SRI-4587

Lavalier Microphones

Sennheiser XS LAV USB-C MOBILE KIT

Lavalier Microphones

Sennheiser XS LAV USB-C MOBILE KIT

USB-C lavalier kit. Includes (1) XS Lav USB-C lavalier microphone, (1) Manfrotto PIXI Mini Tripod, (1) Smartphone clamp with cold-shoe mount, (1) Foam windshield for XS Lav, (1) Lavalier clip and (1) Pouch

SKU: SEN-509259

Film textiles and flags

LARH Textile Poly Silk White 8′ X 8′

Film textiles and flags

LARH Textile Poly Silk White 8′ X 8′

LA Rag House Textile Poly Silk White 8′ X 8′.

SKU: LAR-101562

Cloth and gaffer tapes

Tenacious K160 Cloth Tape Camera Matt Black 48mm x 25m (352 equivalent)

Cloth and gaffer tapes

Tenacious K160 Cloth Tape Camera Matt Black 48mm x 25m (352 equivalent)

Tenacious K160 Cloth Tape Camera Matt Black 48mm x 25m (352 equivalent).

SKU: TNC-K160BL48/25

Hard cases

Pelican 1630 Case With Foam Black

Hard cases

Pelican 1630 Case With Foam Black

Sensitive equipment needs protection, and since 1976 the answer has been the Pelican™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived.

Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.

4 strong polyurethane wheels with stainless steel bearings (wheel diameter is 5.3cm)
Stackable
Watertight, crushproof, and dustproof
Reinforced corners
Open cell core with solid wall design – strong, light weight
3 level Pick N Pluck™ with convoluted lid foam
Retractable extension handle
Fold down handles
Easy open Double Throw latches
Stainless steel padlock protectors
Automatic Pressure Equalization Valve – balances interior pressure, keeps water out
O-ring seal
Note: Please consult a sales specialist for more details.
Personalized nameplate service available
Lifetime Guarantee of Excellence

SKU: PEL-PE1630B

Stabilisers

Tilta Power Supply Module for Ring Grip

Stabilisers

Tilta Power Supply Module for Ring Grip