Featured categories
Your Recently Viewed Products
Domke F-34R 28cm (11″) Protective Wrap Gray
The Domke 11×11″ Color Coded Protective Wraps (Gray) are constructed of padded knit nylon with a non-scratch nylon backing. These squares can be wrapped around small cameras, lenses, electronic flashes, tools, or anything else that will fit inside a bag or case. Touch fastener tabs on all four corners allow them to be wrapped in any shape.
Mean Well GST160A12-R7B Desktop Power Supply 138W 12V 11.5A 2.1mm Plug

Mean Well GST160A12-R7B Desktop Power Supply 138W 12V 11.5A 2.1mm Plug
Universal AC input/full range
3-pole AC inlet IEC320-C14
Built-in active PFC function
No load power consumption 0.15W
Energy efficiency Level VI
Comply with EISA 2007/DoE, NRCan, AU/NZ MEPS,EU ErP and CoC Version 5
Class I power (with earth pin)
Protections: Short ircuit/Overload/Over-voltage
/Over-temperature
Fanless design with -30 to +70°C working temperature
Fully enclosed plastic case
LED indicator for power on
3 years warranty
Avenger AV-I1024 Avenger Flag Cutter 120 x 120 cm/48 x 48 in Square
The Avenger I1024 Cutter is a 48 x 48 in/122 x 122 cm square flag made using black commando fabrics.
Flags are designed to control light whether the light is natural or artificial. Flags are used to control spill from other lights or keep light from hitting areas where light is not wanted on sets, in studio or on location.
The built in 3/8 in/10 mm mounting pin allows for easy connection to Avenger grip heads, grip arms and C-Stands. Flags are a great tool that can be used to protect cameras and lens from unwanted flare too! All Avenger flags, floppies and cutters are made using a strong webbing all around the frame to protect the edges from wear and the frames are a black powder coated mild steel.
Recommended Accessories: A2030DKIT, A2030DCBKIT, A2033LKIT, A2033FKIT, A2033FCBKIT, D200, D200B, D520L, D500L, AVCSA1301B, A5029
Canson Infinity Arches Aquarelle Rag 310gsm A2 25 Sheets
Rode WS8 Deluxe Windshield for Small Diaphragm Microphones
The WS8 is a high-performance windshield that can be used with any RĂ˜DE small-diaphragm condenser microphone (or ‘pencil mic’). Designed for use in windy recording environments, the WS8 combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber base prevents any wind noise from entering the rear of the microphone pickup area.
Key Features:
High-performance windshield for RĂ˜DE small-diaphragm microphones
Compatible with any microphone with a capsule 20-27mm in diameter
Suitable for NT5, NT55, NT6, M5 and TF-5 microphones
Acoustically transparent synthetic fur
Easy to fit and remove
Laserworld CS-1000RGB MKIII Analogue Laser Projector 1000mW
The Laserworld CS-1000RGB MKIII is an Analogue Laser Projector 1000mW. This powerful semi-professional pure diode laser is capable of intense standard laser effects like; beams, waves and tunnels but also basic graphics
Photographic Solutions PEC-12 Archival Film & Print Cleaner Refill Can 946ml

Photographic Solutions PEC-12 Archival Film & Print Cleaner Refill Can 946ml
PEC-12 Photo Emulsion Cleaner is a non-water based film and print cleaner which removes virtually all non-water based stains from color and black & white slides, negatives, and prints.
PEC-12 removes grease pencil, adhesive residue, finger oils, ball-point pen, fungus, smoke & soot damage, laser separation oil and most permanent inks.
Containing no water, PEC-12 dries instantly with no emulsion swelling and leaves no residue.
This is a 946ml can of cleaning solution.
Canson Infinity Baryta Photographique II 310gsm 24″ x 15.2m
SmallRig Cage for DJI Osmo Action 4 / 3 4119C
Dedicated full cage for DJI Osmo Action 5 Pro, DJI Osmo Action 4 and 3 action cameras, provides protection and mounting solutions.
Supports DJI Mic, gives full access to top ports and battery door.
Magnetic quick-release mounts on the bottom and right side, compatible with the original magnetic quick-release adapter for a quick switch between horizontal and vertical modes.
A cold shoe mount at the top and anti-twist 1/4″-20 threaded holes on three sides.