Featured categories
Your Recently Viewed Products
Rycote Connbox Cb10 (Lemo)
Connbox CB10 (LEMO)
Product Code: 016918
The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox CB10 (LEMO) is suitable for single Schoeps CCM_L in a WS 9 Kit. The Lemo tail is hardwired to the Connbox.
Main Benefits:
An effective and ready-to-use solution to connection problems, the Connbox will enable professional sound recorders to achieve clean, high quality audio recordings.
Acting as a transition connector and anchor point for the microphone tail, the lengths of cable are set to work perfectly with the microphone fitted in the windshield, without touching the internal surface of the basket. The soft cable then greatly reduces the transmission path of cable-borne noise, thus further reducing cable rumble.
The Connbox is made of the highest quality components, using Gold 3-pin Neutrik X-series XLR connectors, and an ultra soft Mogami star-quad cable.
Connbox 6 is suitable for a M/S stereo pair of Schoeps CCM in a mono extended ballgag with Lemo connectors
Tech Specs
INPUT
Input connector: Lemo
Input Connbox Connector: Hardwired
Input Cable outside diameter: 2.5mm
Input Cable Exposed Length: 100mm
Input Cable Band Colour: Plain
OUTPUT
Output Connector: XLR – 3M
Output Connbox Connector: Hardwired
Output Cable Outside Diameter: 4.8mm
Output Cable Exposed Length: 240mm
Output Cable Band Colour: Plain
MyMic – https://mymic.rycote.com/products/connbox-cb10-lemo/
Inovativ Long Crossbar For Echo/ranger 30
Replacement Crossbars for INOVATIV workstation carts.
Crossbars feature accessory passthrough holes for attachment of accessories like Cable Hooks as well as threaded accessory mounting points along its length, providing further customization options for your workstation setup. Add an additional crossbar to your workstation for enhanced functionality and organization.
Profoto Bounce Card for A1 Flash
The Bounce Card comes in a soft microfiber pouch and easily clicks on and off thanks to the smart magnetic mount, and it’s stackable so it can be used in combination with other A1 Light Shaping Tools like gels, for example. All of which allow you to be more creative with light.
RODE WS9-G (Green) Deluxe Furry Windshield for VideoMicro & VideoMic Me Range
The RODE WS9-G is a deluxe microphone windshield for the RØDE VideoMicro and VideoMic Me range in Green. It features an open-cell foam that is covered by an acoustically transparent synthetic fur. As a result, it will minimise wind noise when recording outdoors. It is a perfect solution for preserving the audio quality when you find yourself capturing audio in external locations.
Colours that match the mood of your production
The RODE WS9-G is both easy to fit and remove and is available in 5x colours. It comes in grey, pink, green, blue and orange. So you can switch the perfect colour that suits your mood or just add an additional colour to your production. The different colours also provide the additional opportunity of allocating different coloured windshields to individual camera operators for identification. The RODE WS9-G is a high-performance deluxe windshield and is compatible with the RØDE: VideoMicro, VideoMic Me, VideoMic Me-L and VideoMic Me-C.
Benefits of using a Deluxe Furry Windshield
An additional benefit of using the RODE WS9-G is that it will assist in reducing excessive pressures on a microphone’s element. These pressures may come in the form of wind current, breath blasts and vocal plosives. The WS9-G offers superior wind protection with its acoustically transparent synthetic fur outer layer and open-cell foam. It’s great for outdoor adventures and fast-moving subjects as it eliminates the wind noise or thumping blasts caused by the wind hitting the microphone.
Because audio contamination is very difficult to remove in the post-production process it often results in poor audio quality. By using a Deluxe Furry Windshield will save you valuable time and effort in the post-production process and untimely enhance your production quality.
The WS9-G (Green) is also available in GREY, PINK, ORANGE and BLUE.
WANDRD ROGUE Sling 6L Yuma Tan
RED Compact Top Handle
The RED Compact Top Handle easily mounts to the top of the KOMODO-X or V-RAPTOR camera body while offering a combination of comfort and utility for carrying or shooting with your camera. This top-mounted machined handle features ergonomic Bcote wood inlays with camera trigger control. The handle includes handle trigger, rear 3 inch piece, front 1 inch piece and 15mm Monitor Mount.
The RED Compact Top Handle is not compatible with DSMC, DSMC2 or RED RANGER camera systems.
Brother TZeM941 Labelling Tape 18mm x 8m Black on Silver Matt
Brother TZeM941 Labelling Tape 18mm x 8m Black on Silver Matt. Printer Compatibility: BROTHER PT-D610BT,BROTHER PT-D460BT,BROTHER PT1400,BROTHER PT1650,BROTHER PT1750,BROTHER PT1830,BROTHER PT1830SP,BROTHER PT1880,BROTHER PT1950,BROTHER PT2030,BROTHER PT2100,BROTHER PT2300,BROTHER PT2420PC,BROTHER PT2430PC,BROTHER PT2700,BROTHER PT2730,BROTHER PT320,BROTHER PT330,BROTHER PT340,BROTHER PT3600,BROTHER PT540,BROTHER PT580C,BROTHER PT7600,BROTHER PT9500PC,BROTHER PT9600,BROTHER PT9700PC,BROTHER PT9800PCN,BROTHER PTD400,BROTHER PTD450,BROTHER PTD600,BROTHER PTD800W,BROTHER PTE300VP,BROTHER PTE550WVP,BROTHER PTH300LI,BROTHER PTP700,BROTHER PTP710BT,BROTHER PTP750W,BROTHER PTP900W,BROTHER PTP950NW.
Think Tank Pixel Racing V3.0
Shoulder strap provides vertical support to Think Tank belts and beltpacks
SmallRig RA-D55 Parabolic Softbox 3585
1. Develop the latest generation of quick-release chuck design, ultra-saving pressing structure, Only press and lift simplify installation and disassembly, save time and effort.
2. Adopt high-reflective coating + Oxford lattice double fabric structure, solid outdoor grade materials, more durable; high-reflective coating, while retaining the original color temperature and CRI, give a more uniform soft light effect.
3. 16 umbrella ribs three-dimensional support, to create a more circular surface, shape a certain depth of the surface effect. using materials from the military umbrella field, lighter and tougher, high elasticity, high-temperature resistance, and can withstand tens of thousands of presses without deformation.
4. Umbrella ribs are all externally mounted to ensure smooth and even coating on the inner side, without affecting the internal reflected light function, what’s more, umbrella bones don’t come off the Velcro easily.
5. Comes with two high-quality soft cloth and grille, which can be freely selected according to needs.
QTY: 4 PCS.