InVision INV-8

Product Code: 041108

Suitable for mics including the Neumann RSM190 and RSM191, Pearl MS8 and MSH10, and Sony ECM 999, ECM 979, and ECM 959.

Main Benefits:

Part of the larger InVision range of noise-reducing microphone shock-mounts, Rycote’s InVision Broadcast, are designed for discreet, low-profile on-camera use in broadcast studio environments where windshielding is not required.

The InVision Broadcast mounts feature Rycote’s latest Lyre suspension systems to offer broadcast professionals the cleanest possible sound, free from unwanted cable or stand-borne noise. They may be used with microphones mounted on desks, stands or boom poles, or suspended mics.

Tech Specs

Suitable for mics including the Neumann RSM190 and RSM191, Pearl MS8 and MSH10, and Sony ECM 999, ECM 979, and ECM 959.

Fitted with:

2 x 30mm clips, with Standard (70mm wide) Lyre
Long bar with 70mm (2.75″) centres

An InVision set contains two Lyre, an appropriate length mounting bar, and in some cases, a reducing sleeve (InVision INV-4). The Lyre suspension webs of our InVision come in two sizes: – InVision Lyre width: 43 mm – Standard Lyre width: 70 mm Mounting bars come in two sizes: – Standard length: 25 mm – Large length: 70 mm The reducing sleeve allows for smaller microphones (e.g. Schoeps CCM series) to be held by the Lyre.

InVision INV-2

Product Code: 041102

Suitable for the Røde NT6 and Sennheiser MKH8000 series (remote), amongst others.

Main Benefits:

A range of shock mounts and accessories intended for use in studio recording.

The Universal Studio Mount (USM) combines with a new Universal Pop Filter to make a complete vocal microphone suspension and pop filter system that will accommodate virtually any large side address microphone.

Rycote’s InVision models 1 to 3, are designed for discreet, low-profile use of compact microphones in broadcast studio environments where windshielding is not required.

Tech Specs

Width: 11cm
Height: 6cm
Length: 18cm

– 1 x 20mm clip at the front and 1 x 9.5mm clip at the rear, with InVision (43mm wide) Lyre
– Standard bar with 25mm (1″) centres

Lyre Web: InVision
Front clip: 20 mm
Back clip: 9.5 mm
Sleeve: No
Bar size: Standard

* not suitable for Boom Pole use

InVision INV-1

Product Code: 041101

Suitable for the AKG C747, Audio-Technica ATM350, Sennheiser ME36, Schoeps CCM, amongst others.

Main Benefits:

A range of shock mounts and accessories intended for use in studio recording.

The Universal Studio Mount (USM) combines with a new Universal Pop Filter to make a complete vocal microphone suspension and pop filter system that will accommodate virtually any large side address microphone.

Rycote’s InVision models 1 to 3, are designed for discreet, low-profile use of compact microphones in broadcast studio environments where windshielding is not required.

Tech Specs

Width: 11cm
Height: 6cm
Length: 18cm

Fitted with:

– 2 x 9.5mm clips with InVision (43mm wide) Lyre, and a reducing sleeve
– Standard bar with 25mm (1″) centres
– Sleeve clips onto the microphone connector and the cable, leaving the microphone casing free to be fitted with a foam windscreen if required

Lyre Web: InVision
Front clip: 9.5 mm
Back clip: 9.5 mm
Sleeve: Yes
Bar size: Standard

* not suitable for Boom Pole used