TecArt – Page 35

GET YOURS

View Products

Main photo – cinematographic and photographic

PRO SOLUTIONS

ABOUT US

TWO DECADES OF CINEMATOGRAPHIC, PHOTOGRAPHIC, ARCHITECTURAL AND STAGE SOLUTIONS

EXPERTS IN SERVICE AND REPAIRS

LEARN MORE

AUSTRALIA'S LEADING SERVICE CENTRE FOR ADVANCED REPAIRS

MONOLIGHTS
AND FRESNELS

VIEW THE RANGE

CONTINUOUS

Your Recently Viewed Products

Fixed par lighting

Chauvet DJ Slimpar-Q12 BT Quad LED Par Can with Bluetooth

Fixed par lighting

Chauvet DJ Slimpar-Q12 BT Quad LED Par Can with Bluetooth

0 out of 5

(0)

Chauvet DJ Slimpar Q12 BT
The Chauvet DJ Slimpar Q12 BT is a versatile LED parcan with integrated Bluetooth making controlling the light easier than ever. Simply connect via your favourite Bluetooth enabled smartphone or tablet device with the BTAir app and access the full control of the light without any additional hardware needed. The SlimPAR Q12 BT features 12 quad-colour (RGBA) LEDs that deliver a vibrant colour wash and its compact design easily fits inside sticks of truss making it perfect for truss warming. An optional IRC-6 remote can also be used for control as well as DMX, automated and sound-activated programs. Compatible with BTAir.

SKU: CDJ-SLIMPAR-Q12BT

Fixed par lighting

Chauvet DJ FXPar 9 Multi Effect LED Par Can

Fixed par lighting

Chauvet DJ FXPar 9 Multi Effect LED Par Can

0 out of 5

(0)

Chauvet DJ FXPar 9
The Chauvet DJ FXpar 9 is a compact and dynamic multi-effect LED wash light fixture. Perfect for giving your stage or dance floor amazing colour and ‘wow’ factor!
Featuring a unique 3-tier design with an outer ring of RGB+UV LEDs, and a central tri-colour COB LED with an SMD strobe ring, each featuring separate control. The FxPar comes loaded with a host of static colour setting and auto programs. And can also be use as master / slave, or controlled with DMX for a more dynamic look.
The Chauvet DJ FXPar9 is ready to use straight-from-box and is the perfect addition to your lighting show. And to make it even easier you can power link up to 13 units together from 1 mains power outlet.
The perfect dynamic LED wash effect for DJs, bands, venues, and more.

SKU: CDJ-FXPAR9

Photo tripod accessories

Manfrotto R123.91 Handle w Bolt Assy

Photo tripod accessories

Manfrotto R123.91 Handle w Bolt Assy

0 out of 5

(0)

Manfrotto R123.91 Handle w Bolt Assy

SKU: MAN-R123.91

Microphone Accessories

Rycote Modular Windshield Ws 3 Kit, (30mm, No Cb)

Microphone Accessories

Rycote Modular Windshield Ws 3 Kit, (30mm, No Cb)

0 out of 5

(0)

Modular Windshield Kit 3 (30mm, No CB)

Product Code: 086071

Suitable for Neumann RSM191

Main Benefits:

Flexible, complete windshield and suspension package, which provides varying levels of windshielding for numerous microphone configurations

The iconic Windshield Kit is the industry standard, and leads the way in windshielding and suspension technology

The iconic Modular Windshield Kit is the professionals’ choice when maximum isolation from wind and handling noise is required.

This complete modular system can be configured to allow almost any microphone to be shock-mounted and provided with varying degrees of windshielding. Components may be ordered separately, or as one of a series of kits, which simplify the selection process for many common configurations.

A Modular Windshield Kit is comprised of the following three main components: Modular Suspension, Modular Windshield and Windjammer.

Tech Specs

Suitable for Neumann RSM191

Compatibility – https://www.mymic.rycote.com/products/modular-windshield-kit-3-30mm-no-cb/#compatibility

MyMic – https://www.mymic.rycote.com/products/modular-windshield-kit-3-30mm-no-cb/

SKU: RYC-RY086071

Microphone Accessories

Rycote Hyper Cardioid Shotgun Microphone 22cm, Long Directional Mono Mic 3 Pin XLR Connection

Microphone Accessories

Rycote Hyper Cardioid Shotgun Microphone 22cm, Long Directional Mono Mic 3 Pin XLR Connection

0 out of 5

(0)

The Rycote HC-22 is a hypercardioid shotgun microphone designed for a wide range of applications in cinema, TV, ENG, live broadcast, sound design, studio and field recording.

The HC-22 combines a highly directional polar pattern with extremely low self-noise. This provides solid off-axis rejection and isolation with a precise sound quality to match, making the HC-22 a great all around mic for recording environments which may require a more focused recording approach.

FEATURES

Capsule:
• Professional broadcast quality and individually fine-tuned back electret capsule

Preamp:
• Compact design
• Ultra low noise circuitry
• Sophisticated RF shielding
• Low power consumption

Connector:
• Gold-plated Neutrik XLR connector

RF-Protection:
• Active in-line filtering
• Fine-tuned mechanical RF shielding
• Thoroughly tested against digital wireless systems and walkie talkies

Materials:
• Preamp made from non-corrosive machined brass – low impedance to ensure best possible and longest lasting RF shielding
• Capsule / Interference tube made from lightweight machined aluminium
• Weight balanced to help keep center of gravity further back to provide improved handling when using Rycote Lyre shock mounts and slip-on wind protection

PRODUCT CODE: RYC079002

SPECIFICATIONS:

Frequency Range: 50 Hz – 20 kHz
Self Noise: 8.5 dB A (+/- 2 dB)
Polar Pattern: Hyper cardioid
Capsule Type: Back Electret Condenser
Output Sensitivity: 48.0 mV/Pa (-26.3 dB)
Max. Output Voltage: 5 V (if relative load is < 2kΩ)
Output Impedance: 100 Ω
Min. Recommended Load: 1 kΩ
Signal / Noise Ratio: 85 dB typical (@ 1 kHz/Pa A-weighted)
CMRR (@ 1 kHz): > 60 dB
Max. Cable Length: 100 m
Powering: P-48
Powering Valid Range: 48-24V (Max SPL reduced at 24V)
Current Consumption: ~ 3.0 mA
Max. SPL: 133 dB SPL (@ 1 kHz (1.0% THD typical)
RFI Shield: Yes
Connector: XLR-3M
Weight: 100 g
Colour: Matte Black w/ Red Accent
Dimensions: Length 221mm x Diameter 19mm

COMPATIBLE RYCOTE WINDSHIELDS
• 18cm SGM Foam
• 18cm Classic Softie
• 18cm Short Fur Softie
• 18cm Super Softie
• Nano Shield Kit NS4-DB
• Cyclone Windshield, Medium
• Modular Windshield Kit 3

SKU: RYC-RYC079002

Microphone Accessories

Rycote Invision Usm-Vb

Microphone Accessories

Rycote Invision Usm-Vb

0 out of 5

(0)

InVision USM-VB

Product Code: 044912

Universal microphone shock-mount for microphones weighing up to 900 grammes & between 55mm and 68mm in diameter.

Main Benefits:

Offers up to twice the isolation from cable and stand-borne noise of traditional ‘cat’s cradle’ elasticated microphone mounts.

Virtually indestructible

No elasticated parts – never sags or needs rethreading

For several years, Rycote InVision mounts have been available for narrow-barrelled shotgun and stick microphones in broadcast and videography applications, but not until 2010, and the release of the striking Universal Studio Mount (USM) was there an InVision shock-mount capable of accommodating large-diaphragm recording microphones for use in recording studios.

Like the other InVision mounts, the USM makes use of Rycote’s patented vibration-resistant Lyre mount, but on this mount the W-shaped Lyres are placed around a central mounting ring with adjustable fasteners, allowing the USM to accommodate any microphone with a diameter of between 18 and 68 millimetres.

The Rycote USM updates the concept of the microphone suspension for the 21st century, completely omitting any elasticated parts and using modern materials to create a virtually indestructible shock-mount with a performance that far outstrips that of the humble ‘cat’s cradle’ suspension. In controlled tests at the Rycote factory, the USM provided up to twice the isolation of traditional microphone suspension systems.

Tech Specs

Suitable for Large Diaphragm recording microphones

Suspension weight: 145g (5.1 oz)
Overall diameter: 120mm (4.72″)
Length: 170mm (6.39′)
Depth: 70mm (2.75″)
Mic diameters: 55-68 mm
Microphone length: up to 300 mm
Maximum Weight (vertical): 900 g (26.5 oz)
Maximum weight (horizontal): 500g (17.6 oz)
Suspension Rotation (maximum): 175%

Product Height: 8 cm
Product Length: 17 cm
Product Width: 14 cm
Gross Weight: 0.2735 Kg
Net Weight: 0.1408 Kg

Compatibility – https://mymic.rycote.com/products/invision-usm-vb/#compatibility

MyMic – https://mymic.rycote.com/products/invision-usm-vb/

SKU: RYC-RY044912

Gels and filters

Lee Gel Roll 443 1/4 CT Straw (CTS) 1.2m x 7.6m

Gels and filters

Lee Gel Roll 443 1/4 CT Straw (CTS) 1.2m x 7.6m

0 out of 5

(0)

Lee Gel Roll 443 1/4 CT Straw (CTS) 1.2m x 7.6m. Daylight to Tungsten 4600K with a slight yellow bias. (Transmission = 81%).

SKU: LEE-LEE.443R

Photo tripod heads

Manfrotto 324RC2 Light Duty Grip Ball Head, Compact and Portable

Photo tripod heads

Manfrotto 324RC2 Light Duty Grip Ball Head, Compact and Portable

0 out of 5

(0)

Easy-to-use and transport, the Light Duty Grip Ball Head is an ideal choice for new photographers. Adjust to the perfect angle in a flash for better shooting accuracy. This tripod head is super lightweight and compact so you won’t even notice it in your kit bag.

Made from durable and reliable aluminium, the Light Duty Grip Ball Head is designed to last. It has an innovative horizontal joystick to help you move around quickly and without hesitation. The lock mechanism comes equipped with friction control so you can be sure everything is tightly in place when you’re in position.

This clever piece of equipment features an innovative built-in spirit level, helping you achieve an accurate angle position every single time. The quick release camera plate helps you setup faster. All the tools you need to improve your shots, all in one convenient package.

SKU: MAN-324RC2