TecArt – Page 31

The new Pavotube II 30X Tube lights will let your creativity run wild. The new model of LED tubes now encompass pixel control, giving creatives endless ways to light. Put a splash of colour onto a background, or light up your subject with a specific hue. The PavoTubes feature 0 to 100% dimming with a maximum illumination of 2850 lumens at 5600K, as well as a full spectrum RGB and pre-programmed special lighting effects. With the colour temperature adjustable from 2700K-12000K, a CRI of 98 and a TLCI of 95 this RGB LED tube exceeds most studio lighting needs.

It also features a choice of over 360 static light colours on the RGB spectrum and can cycle through the entire spectrum at a speed of your choice. Now with more advanced effect modes, the 30X has 15 in built practical effects and with the new pixel feature adds another 10 pixel effects to enhance your lighting and creativity.

With easy-to-use dials and buttons built into the light tube, as well as built-in 2.4GHz radio control, this RGB tube light is versatile enough to fit right into your existing set up without needing a lot of extra preparation.

SKU: NAN-NNPAV30X8KIT

Manfrotto R1051.40 ASM Handle

Manfrotto R1051.40 ASM Handle

Video production hardware

Manfrotto R1051.40 ASM Handle

SKU: MAN-R1051.40

Blackmagic Design Fairlight HDMI Monitor Interface

Video production hardware

Blackmagic Design Fairlight HDMI Monitor Interface

Fixed bar and cyc lighting

If you are using the Fairlight Console components in your own custom desk with HDMI monitors, you can use Fairlight HDMI Monitor Interface to generate the graphical feedback from Fairlight Console Channel Control! This compact converter can be placed discretely on the back of your HDMI monitor and converts the Fairlight console ethernet data to HDMI. You get instant graphic feedback for the channel control status just as you would with the Fairlight Console LCD Monitor! The interface input can also be switched to SDI so you can see the talent up close for checking lip sync while editing, and an SDI output that mirrors the HDMI output lets you connect the interface to a remote SDI monitor!

SKU: BLA-DV/RESFA/MONINT

Beamz LCB288 LED Bar Wash and Strobe RGB+W

Fixed bar and cyc lighting

Beamz LCB288 LED Bar Wash and Strobe RGB+W

The Beamz LCB288 is a Wash and Strobe LED bar with 288 pieces SMD LEDs, divided into a top and bottom section of a total of 192 RGB LEDs and a center section of 96 white SMD LEDs.

SKU: BMZ-LCB288

Camera and NPF batteries

Dynacore DV-6CS SONY L Series NP-F Battery Pack

Camera and NPF batteries

Dynacore DV-6CS SONY L Series NP-F Battery Pack

SONY NP-F series battery comparable

7.2V nominal voltage Li-ion battery

47.5Wh /6600mAh capacity

30W / 4A constant power load

Built-in USB-A 5V/9V/12V output

Built-in 30W USB-C input and output

4-level LED power indicator

Multiple circuit protections

SKU: DYN-DV-6CS

Fixed par lighting

Astera AX9 PowerPAR LED Par RGBAM 105W

Fixed par lighting

Astera AX9 PowerPAR LED Par RGBAM 105W

The AX9 utilizes the AX5’s successful 3-in-1 concept which allows it to be used as wireless light and elegant uplight as well as a wired PAR light for longer or bigger installations. This makes it an extremely cost-efficient light and keeps your investment to a minimum.

The AX9 packs extreme brightness in a compact and light housing while still giving you industry-leading colors and white tones thanks to its Titan LED Engine.

SKU: AST-AX9

Manfrotto R110335 Pan Bar Level

Manfrotto R110335 Pan Bar Level

Manfrotto R110335 Pan Bar Level

SKU: MAN-R110335

Manfrotto R357.25 Block Assy

Manfrotto R357.25 Block Assy

Manfrotto R357.25 Block Assy

SKU: MAN-R357.25

Manfrotto R340.03 Sliding Pin

Manfrotto R340.03 Sliding Pin

Manfrotto R340.03 Sliding Pin

SKU: MAN-R340.03

Rycote Nano-Shield 22/25 Lyre 72-Shore (Pair)

Rycote Nano-Shield 22/25 Lyre 72-Shore (Pair)

Nano-Shield 22/25 Lyre 72-Shore (Pair)

A pair of 22/25mm Lyres designed for use with the new Nano-Shield Kits. As per the 2nd image, note the compatibility chart by way of brand and model.

SKU: RYC-RY042507

Rycote Modular Windshield Ws 5 Kit (XLR-5f)

Rycote Modular Windshield Ws 5 Kit (XLR-5f)

Flexible, complete windshield and suspension package, which provides varying levels of windshielding for numerous microphone configurations

Modular Windshield WS 5 Kit (XLR-5F)

Product Code: 086013

The Modular Windshield 5 Kit is suitable for stereo microphones from from 281mm up to 350mm in length and 19-25mm diameter with a 5-pin XLR connector such as the Sanken CSS 5

Main Benefits:

The iconic Windshield Kit is the industry standard, and leads the way in windshielding and suspension technology

The Modular Windshield Kit is the professionals’ choice when maximum isolation from wind and handling noise is required.

This complete modular system can be configured to allow almost any microphone to be shock-mounted and provided with varying degrees of windshielding. Components may be ordered separately, or as one of a series of kits, which simplify the selection process for many common configurations.A Modular Windshield Kit is comprised of the following three main components: Modular Suspension, Modular Windshield and Windjammer.

Modular Suspension

Our suspensions provides complete isolation against handling noise and cable-borne noises, by supporting the microphone in a cradle arrangement using Lyre suspension webs.

Windshield

The Windshield basket completely surrounds the microphone and its connector, sliding onto the Modular Suspension to provide up to 30dB of wind noise attenuation. This is the first layer of windshielding protection for your microphone.

Windjammer

The Windjammer introduced by Rycote in 1985, is high quality synthetic fur covers, designed to fit perfectly over the Modular Windshield. It gives an additional 20dB of wind noise attenuation. Fitted with a drawstring & toggle to allow snug and easy fitting. Modular Windshield Kits, including zipped Windjammer are also available on request.

Tech Specs

Windshield Body Length: 400mm (WS4 + Extension 70mm)
Total Windshield Length: 510mm (includes the End Caps)
Height of Windshield 100mm
Windjammer Fur Length: 40mm
Windjammer Fur Colour: Grey
Microphone Connector: XLR-5F
Max Wind-noise Attenuation: 50 dB

Compatibility – https://www.mymic.rycote.com/products/modular-windshield-ws-5-kit-xlr-5f/#compatibility

MyMic – https://www.mymic.rycote.com/products/modular-windshield-ws-5-kit-xlr-5f/

SKU: RYC-RY086013

Coemar Lens Tube 70° Fixed Beam (for LED Profile)

Coemar Lens Tube 70° Fixed Beam (for LED Profile)

Stands Combo and Overhead

Coemar Lens Tube 70° Fixed Beam (for LED Profile).

SKU: COE-BC10011A024

Avenger A3065CS Stand Overhead 65CS wide 189-638cm 30kg Payload Chrome 2 Lvl Leg w21.5kg

Stands Combo and Overhead

Avenger A3065CS Stand Overhead 65CS wide 189-638cm 30kg Payload Chrome 2 Lvl Leg w21.5kg

Avenger overhead stands are built in chrome steel, incorporate a dual purpose head that has a 4 1/2 in grip head and 28 mm/ 1 1/8 in receiver. The style of these stands are nicknamed ”Mombo Combo”. The Avenger A3065CS is a 4 section, 3 riser stand and is very popular in supporting overhead frames, Avenger fold away frames, butterflies and butterfly pipe kits. Max height on this stand is 638 cm/251.2 in and is capable of taking a max load of 40 kg/88.2 lbs. The A3065CS is the tallest stand in this series of overhead stands from Avenger and incorporates a very wide footprint of 204 cm/80.3 in allowing for great stability. Braked wheels are not available for the 30mm square legs, but this stand has 2 levelling legs for working on all types of uneven terrain. Recommended Accessories: H2012, H2008, H1200M, 087WBK, H2000M, 087WBK, E200, H9000, H2512, G200-1.

SKU: AVN-A3065CS

Aputure Iris for Spotlight Mount

Aputure Iris for Spotlight Mount