TecArt – Page 14

Well suited to interviews, dialogue, voice-overs, DIY journalism, film and broadcast applications.

Mic weighs only 10 gm

Features a built-in shock mount and 10.16 cm gooseneck which allows for a wide range of positioning options on set.

Lighter and more flexible than traditional boom mics making it easier to interview subjects from a distance.

The small footprint makes it exceptionally good as a directional plant mic delivering great audio from tight spots.

The narrow pickup pattern reduces reflections and noise for better voice-overs in hotel rooms and other on-the-go locations.

Low self-noise, high sensitivity and capable of handling high SPLs for natural undistorted results even during unpredictable shoots when a subject yells or shouts.

Optimised for speech with a flat-frequency response up until the 2 dB soft boost in the 10 kHz range.

Optimal powering is provided via 48V phantom power.

The mic will also run on 12v phantom power but at a reduced capacity to handle high SPLs.

Similarly, it can operate on 5-10V from bodypack transmitters and 3-4V from low DC transmitters but again the reduced power means the mic is more likely to distort if the talent or interview subject shouts or gets loud.

The 4097 is built to handle tough location conditions and is IP58 certified for resistance to moisture, extreme temperatures and humidity.

The housing is covered with a water-repellant nano coating and the sensitive amp at the core of the mic is hermetically seals.

The 10.16 cm gooseneck and redesigned swiveling MicroDot connection offers a wide variety of positioning options to give you optimal sound with booms and wireless transmitters.

SKU: DPA-DP-4097-C-G-B00

Nanlite PavoTube II 30X 4ft RGBWW LED tube 8 Kit with hard roller case

Nanlite PavoTube II 30X 4ft RGBWW LED tube 8 Kit with hard roller case

The new Pavotube II 30X Tube lights will let your creativity run wild. The new model of LED tubes now encompass pixel control, giving creatives endless ways to light. Put a splash of colour onto a background, or light up your subject with a specific hue. The PavoTubes feature 0 to 100% dimming with a maximum illumination of 2850 lumens at 5600K, as well as a full spectrum RGB and pre-programmed special lighting effects. With the colour temperature adjustable from 2700K-12000K, a CRI of 98 and a TLCI of 95 this RGB LED tube exceeds most studio lighting needs.

It also features a choice of over 360 static light colours on the RGB spectrum and can cycle through the entire spectrum at a speed of your choice. Now with more advanced effect modes, the 30X has 15 in built practical effects and with the new pixel feature adds another 10 pixel effects to enhance your lighting and creativity.

With easy-to-use dials and buttons built into the light tube, as well as built-in 2.4GHz radio control, this RGB tube light is versatile enough to fit right into your existing set up without needing a lot of extra preparation.

SKU: NAN-NNPAV30X8KIT

Gels and filters

Rosco E-Colour Gel Roll 464 Quiet 1/4 Grid Cloth 1.5m x 6.1m

Gels and filters

Rosco E-Colour Gel Roll 464 Quiet 1/4 Grid Cloth 1.5m x 6.1m

Rosco E-Colour Gel Roll 464 Quiet 1/4 Grid Cloth 1.5m x 6.1m. Produces a weak diffusion effect.

SKU: ROS-102304646020

LED panels

Nanlite Mixpad II 11 LED Panel RGB 13W

LED panels

Nanlite Mixpad II 11 LED Panel RGB 13W

All the colours of the rainbow in a small but powerful on-camera LED light.

The Nanlite Mixpad 11 Series II LED panels offer a soft, diffused light mode, and a high-power long-throw mode to throw the light a good distance. Being an RGB on-camera light offers you the ability to control the precise colour and power output you are after. In addition to that, the Mixpanel11 are super slim and compact with a diffused front panel that takes up the whole front surface for maximum softness in the smallest space.

The Mixpanel 11 has a rear adjustment dial to to control colour temperature between 6500K cool white, adjustable to 2700K warm white.

SKU: NAN-NNMIXPADII11P

Stands C-Stand

Avenger A2033FCBKIT Kit C-Stand 33 Black Inc. A2033F D200 & D520

Stands C-Stand

Avenger A2033FCBKIT Kit C-Stand 33 Black Inc. A2033F D200 & D520

The Avenger A2033FCBKIT in Chrome Steel Black comes complete with the A2033F 40” 3 Section, 2 riser Fixed Base Chrome Steel C-Stand (max height of 330 cm/129.1 in) a silver D200 2 1/2 in grip head and a silver 40” D520 Grip Arm. Avenger C-Stands feature captive locking handles that do not vibrate free, use a black paint process that is more durable than powder coating and perform in the most demanding environments. Avenger C-Stands chrome plated finishes are second to none and provide long lasting durability. They are the most durable in the industry! Avenger fixed bases are not welded and as a result spare parts are easily available should you damage a leg or casting. Couple this with the unbeatable braking power of the D200 grip head and D520 grip arm, this Avenger kit will work flawlessly with flags, gobos, floppies, cutters and all types of lighting whether you be on motion picture sets, shooting video or working in photo studios. Recommended accessories: D600CB, E650, F830, E390, Roller Bag AVCSA1301B, D800KIT, D240, D250, D050, D220.

SKU: AVN-A2033FCBKIT

Road cases

Beamz FLC5402 Flight Case for 2 x StarColour 540

Road cases

Beamz FLC5402 Flight Case for 2 x StarColour 540

This flight case transports 2 x Beamz Star Color 540 LED Wash Lights effectively. The construction makes it easy to use by only taking the cover off. Sturdy handles and wheels, butterfly locks, aluminum profiles, ball corners and solid foam on the inside keep your lighting fixtures protected.

SKU: BMZ-FLC5402

Nanlite PavoTube II 30XR 4ft RGBWW LED tube 1KIT

Nanlite PavoTube II 30XR 4ft RGBWW LED tube 1KIT

Monitor screen accessories

Go wireless with PavoTube II XR!

The LumenRadio CRMX function has been integrated into the previous PavoTube II X series, while all other outstanding features have been maintained, including ultra-wide CCT Range of 2700K to 12000K, G/M ± 100 and built-in batteries.

With its inclusion in the lighting arsenal, creators will be able to unleash their unlimited creative inspirations free of messy cables. CRMX was specifically developed to meet the demand for reliable, easy to use, and cost effective wireless lighting controls.

The new Pavotube II 30XR Tube lights will let your creativity run wild. The new model of LED tubes now encompass pixel control, giving creatives endless ways to light. Put a splash of colour onto a background, or light up your subject with a specific hue. The PavoTubes feature 0 to 100% dimming with a maximum illumination of 2850 lumens at 5600K, as well as a full spectrum RGB and pre-programmed special lighting effects. With the colour temperature adjustable from 2700K-12000K, a CRI of 98 and a TLCI of 95 this RGB LED tube exceeds most studio lighting needs.

SKU: NAN-NNPAV30XR1KIT

Gravity Stands Universal Laptop Stand with Adjustable Holding Pins and Steel Base Black

Monitor screen accessories

Gravity Stands Universal Laptop Stand with Adjustable Holding Pins and Steel Base Black

Simple and elegant height-adjustable stand

Stable and flat steel base plate

Tiltable tray

Adjustable holding pins to keep laptops, tablets and other items in place

Can be used as a lectern and home office solution

SKU: GRA-GLTST02B

On light modifiers

Coemar Lens Tube 26° Fixed Beam (for LED Profile)

On light modifiers

Coemar Lens Tube 26° Fixed Beam (for LED Profile)

Coemar Lens Tube 26° Fixed Beam (for LED Profile).

SKU: COE-BC10011A013

Lens filters

Tiffen 4×5.65 Pearlescent 1/4

Lens filters

Tiffen 4×5.65 Pearlescent 1/4

The Tiffen 4 x 5.65″ Pearlescent 1/4 Filter can be applied to purposely soften contrast and reduce sharpness. This can be useful for high-resolution digital cinematography in order to create a more flattering result of a subject by reducing the appearance of blemishes and softening highlights. Additionally, a pearlescent halo around highlights is created which can further enhance a subject’s appearance or produce a desired effect.

This filter has a grade of 1/4. Grades of 1/8, 1/2, 1, and 2 are also available where this filter type’s effect becomes approximately twice as strong with each grade number increase.

This filter is made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch.

Softens contrast and reduces sharpness
Reduces the appearance of blemishes and softens highlights
Creates pearlescent halo around highlights
Padded pouch included for storage and transport

SKU: TIF-45650PEARL14

Manfrotto R4190.22 ASM Knob

Manfrotto R4190.22 ASM Knob

Wireless DMX distribution

Manfrotto R4190.22 ASM Knob

SKU: MAN-R4190.22

LumenRadio CRMX Outdoor Slim RX IP65 w/RDM & DALI Single Universe Receiver

Wireless DMX distribution

LumenRadio CRMX Outdoor Slim RX IP65 w/RDM & DALI Single Universe Receiver

CRMX Slim™ RX RDM is an IP65 rated receiver for one DMX/RDM universe being transmitted by any CRMX transmitter. It supports one full DMX/RDM universe of up to 512 channels at maximum refresh rate. CRMX Slim RX RDM is the smallest available RDM enabled wireless lighting control product rated for true outdoor use. It can easily be mounted inside light poles, or any other place where space is constrained. Together with an RDM compliant CRMX transmitter, the CRMX Slim RX RDM also supports RDM (ANSI E1.20). Use it together with our prized CRMX SuperNova RDM controller and management software to monitor signal strength and make settings from a remote location. Connect it to any RDM enabled fixture to get wireless feedback from the fixture.

Based on our advanced CRMX technology, the CRMX Slim RX RDM brings you all the advanced features such as Automated Cognitive Coexistence, DMX fidelity, lowest latency in the industry at 5ms, 128 bit encryption and much more. In addition to this, you will get the possibility to configure and monitor your fixtures over RDM, without having to drag a cable. To fit into old wireless systems with legacy equipment, the CRMX Slim RX RDM is compatible with W-DMX™ transmitters working on the 2.4 GHz band. Using it in this way will not allow you to make use of the benefits of the advanced CRMX technology or RDM.

SKU: LRD-LR-800-5001

Manfrotto R055.04 Lever w Screw w Washer

Manfrotto R055.04 Lever w Screw w Washer

Epson SC-P6070, P7070, P8070 and P9070

Manfrotto R055.04 Lever w Screw w Washer

SKU: MAN-R055.04

Epson T54W9 Ligth Light Black Ink 350ml Cartridge for P6070, 7070, 8070 & 9070

Epson SC-P6070, P7070, P8070 and P9070

Epson T54W9 Ligth Light Black Ink 350ml Cartridge for P6070, 7070, 8070 & 9070

UltraChrome HDX pigment ink technology

HDX ink features improved Matte and Photo Black formulations

UltraChrome HDX ink includes Orange and Green inks

Delivers an extended colour gamut with high durability

Violet is an option for specialist proofing and packaging work

Please Make sure Firmware is update for new series ink

SKU: EPS-T54W9

Clamps Super and Spring

Nanlite AS-SCH-FZ Forza Ballast Clamp with Hook to fit larger light stands

Clamps Super and Spring

Nanlite AS-SCH-FZ Forza Ballast Clamp with Hook to fit larger light stands