TecArt
Showing 61–75 of 93 results
-
LED drivers
TecArt LEDrive CV 4 Desktop DMX/RDM
LEDrive CV 4 Desktop is a constant voltage LED dimmer, utilising DMX/RDM control. Standalone speed-adjustable fade effects can be triggered by RDM. The unit has 4 channels of output, each with 2A fuse protection.
RDM compliant device “ANSI/ESTA E1.20 Entertainment Technology – Remote Device Management over USITT DMX512”.
RDM or Remote Device Management is a protocol enhancement to DMX512 that allows bi-directional communications between light fixtures and lighting consoles or RDM specific software over a standard DMX line.
LEDrive CV 4 Desktop can be supplied with an external 12 – 36VDC power supply.
FEATURES
• DMX-512 input and output.
• External power supply 12 – 36VDC.
• Terminal strip output.
• 2 main indication LEDs.
• Operating modes:
1. Pre-programmed lighting scenes: Choose from several pre-programmed scenes via RDM.
2. Control of the channels via DMX.SKU: n/a -
LED drivers
TecArt LEDrive CV 4X Desktop 0-10V
LEDrive CV 4X Desktop is a constant voltage LED dimmer, utilising 0-10V analogue control. High PWM frequency (10 KHz) makes it flicker free and film and TV compatible. The unit has 4 channels of output, each with 5A fuse protection.
LEDrive CV 4X Desktop can be supplied with an external 12 – 36VDC power supply.
FEATURES
• 0-10V control output.
• External power supply 12 – 36VDC.
• Terminal strip output.SPECIFICATIONS
• Input voltage: 10 – 36VDC.
• Power supply: External.
• Dimensions: 130mm (L) x 100mm (W) x 50mm (H).
• Mounting method: Desktop.
• Control input: Terminal strip.
• Outputs: 4 channels.
• Driving capacity: Up to 5A per channel.
• Output voltage: Equal to input voltage – stabilised voltage (PWM).
• Temperature: 0 – 40 degrees Celsius.SKU: n/a -
LED drivers
TecArt LEDrive CV 4X Desktop DMX/RDM
LEDrive CV 4X Desktop is a constant voltage LED dimmer, utilising DMX/RDM control. It features advanced 16 bit dimming technology, allowing different dimming curves to be set. High PWM frequency (10 KHz) makes it flicker free and film and TV compatible. Standalone speed-adjustable fade effects can be triggered by the onboard switches or RDM. The unit has 4 channels of output, each with 5A fuse protection.
RDM compliant device “ANSI/ESTA E1.20 Entertainment Technology – Remote Device Management over USITT DMX512”.
RDM or Remote Device Management is a protocol enhancement to DMX512 that allows bi-directional communications between light fixtures and lighting consoles or RDM specific software over a standard DMX line.
LEDrive CV 4X Desktop can be supplied with an external 12 – 36VDC power supply.
FEATURES
• DMX-512 input and output.
• External power supply 12 – 36VDC.
• Terminal strip output.
• 2 main indication LEDs.
• Operating modes:
1. Pre-programmed lighting scenes: Choose from several pre-programmed scenes via RDM.
2. Control of the channels via DMX.SKU: n/a -
LED drivers
TecArt LEDrive CV 6 DIN Rail 0-10V
LEDrive CV 6 DIN Rail is a constant voltage LED dimmer, utilising 0-10V analogue control. High PWM frequency (10 KHz) makes it flicker free and film and TV compatible. The unit has 6 channels of output, each with 2A fuse protection.
LEDrive CV 6 DIN Rail can be supplied with an external 12 – 36VDC power supply.
FEATURES
• 0-10V control input.
• External power supply 12 – 36VDC.
• Terminal strip output.SPECIFICATIONS
• Input voltage: 10 – 36VDC.
• Power supply: External.
• Dimensions: 110mm (L) x 90mm (W) x 60mm (H).
• Mounting method: DIN Rail.
• Control input: Terminal strip.
• Outputs: 6 channels.
• Driving capacity: Up to 2A per channel.
• Output voltage: Equal to input voltage – stabilised voltage (PWM).
• Temperature: 0 – 40 degrees Celsius.SKU: n/a -
LED drivers
TecArt LEDrive CV 6 DIN Rail DMX/RDM
LEDrive CV 6 DIN Rail is a constant voltage LED dimmer, utilising DMX/RDM control. It features advanced 16 bit dimming technology, allowing different dimming curves to be set. High PWM frequency (10 KHz) makes it flicker free and film and TV compatible. Standalone speed-adjustable fade effects can be triggered by RDM. The unit has 6 channels of output, each with 2A fuse protection.
RDM compliant device “ANSI/ESTA E1.20 Entertainment Technology – Remote Device Management over USITT DMX512”.
RDM or Remote Device Management is a protocol enhancement to DMX512 that allows bi-directional communications between light fixtures and lighting consoles or RDM specific software over a standard DMX line.
LEDrive CV 6 DIN Rail can be supplied with an external 12 – 36VDC power supply.
FEATURES
• DMX-512 input and output.
• External power supply 12 – 36VDC.
• Terminal strip output.
• 2 main indication LEDs.
• Operating modes:
1. Pre-programmed lighting scenes: Choose from several pre-programmed scenes via RDM.
2. Control of the channels via DMX.SKU: n/a -
LED drivers
TecArt LEDrive CV Hybrid 4X Desktop
LEDrive CV Hybrid 4X is a desktop stand alone controller for constant voltage LEDs. High PWM frequency (31.5 KHz) makes it flicker free and film and TV compatible. The unit is controlled via two potentiometers, which allows you to control the brightness and colour temperature of the LEDs. It features different modes and built-in effects. The unit has a PL7 locking connector and driving capacity of 24A.
LEDrive CV Hybrid 4X can be supplied with an external 12 – 36VDC power supply.
FEATURES
• Potentiometer control.
• External power supply 12 – 36VDC.
• PL7 locking connector output.
• 1 multicoloured indication LED.
• Overdrive mode and fire effect included.SPECIFICATIONS
• Input voltage: 10 – 36VDC.
• Power supply: External.
• Dimensions: 160mm (L) x 100mm (W) x 40mm (H).
• Mounting method: Desktop.
• Outputs: 2 channels.
• Driving capacity: Up to 24A.
• Output voltage: Equal to input voltage – stabilised voltage (PWM).
• Temperature: 0 – 40 degrees Celsius.SKU: n/a -
LED drivers
TecArt LEDrive CV Hybrid Desktop
LEDrive CV Hybrid is a desktop stand alone controller for constant voltage LEDs. High PWM frequency (31.5 KHz) makes it flicker free and film and TV compatible. The unit is controlled via two potentiometers, which allows you to control the brightness and colour temperature of the LEDs. It features different modes and built-in effects. The unit has driving capacity of 8A (male barrel input) and 16A (Phoenix connector).
LEDrive CV Hybrid can be supplied with an external 12 – 36VDC power supply.
FEATURES
• Potentiometer control.
• External power supply 12 – 36VDC.
• Terminal strip output.
• 1 multicoloured indication LED.
• Overdrive mode and fire effect included.SPECIFICATIONS
• Input voltage: 10 – 36VDC.
• Power supply: External.
• Dimensions: 100mm (L) x 70mm (W) x 40mm (H).
• Mounting method: Desktop.
• Outputs: 2 channels.
• Driving capacity: Up to 8A (male barrel input) and 16A (Phoenix connector).
• Output voltage: Equal to input voltage – stabilised voltage (PWM).
• Temperature: 0 – 40 degrees Celsius.SKU: n/a -
Data and DMX distribution
TecArt Main/Backup Switcher Desktop DMX 2 in 1 out
The TecArt Main/Backup Switcher is primarily used for main and backup consoles. The unit automatically detects incoming DMX512, and automatically switches to the backup DMX stream as soon as the main input is disconnected or lost.
The TecArt Main/Backup Switcher can also be used to connect an external console to a live DMX network and will automatically switch over to take control.
The units are available with a choice of 3 or 5 pin connectors.
SKU: n/a -
Data and DMX distribution
TecArt Main/Backup Switcher Rack Mount DMX 8 in 4 out
The TecArt Main/Backup Switcher is primarily used for main and backup consoles. The unit automatically detects incoming DMX512, and automatically switches to the backup DMX streams as soon as the main inputs are disconnected or lost.
The TecArt Main/Backup Switcher can also be used to connect an external console to a live DMX network and will automatically switch over to take control.
The unit is available with up to 4 main DMX streams and 4 backup DMX streams. The inputs are connected via front panel XLR connectors and the output connectors are on the rear of the unit. Each input/output has a separate power supply and is electrically isolated to ensure the highest possible level of protection.
SKU: n/a -
Data and DMX distribution
TecArt Manual Switcher Rack Mount DMX 8 in 4 out
The TecArt Manual Switcher is used to switch between two lighting desks, with up to 4 DMX universes for each desk. The inputs are connected via front panel XLR connectors and the output connectors are on the rear of the unit. Each input/output has a separate power supply and is electrically isolated to ensure the highest possible level of protection.
The units are available with a choice of 3 or 5 pin connectors, and are also available in 1, 2 or 3 inputs/outputs.
SKU: n/a -
-
Data and DMX distribution
TecArt Merger Rack Mount DMX 2 in 8 out
The TecArt Merger is a 19” rack mount unit with 2 into 1 merging.
The DMX512 Merger combines data from two separate DMX512 inputs and provides a single merged data output on a HTP (Highest-Takes-Precedence) basis.
The unit can also have the merged output split across 8 opto-isolated outputs with separate drivers and power supplies.
The units are available with a choice of 3 or 5 pin connectors.
SKU: n/a -
Dimmers and power distribution
TecArt Motor Controller 8 way
Contact us for dealer pricing.
The Motor Controller is designed to operate electric chain hoists. The unit includes main breaker, indicators on mains input and forward/reverse switch. Indicators demonstrate up, down and off for each channel. Output via Weiland 6-pin or 16-pin connector. Unit is available in 4-way and 8-way options.
SKU: n/a -
Dimmers and power distribution
TecArt Power Distribution Rack Mount 12 channel 2.5kW
Contact us for dealer pricing or custom configurations.
The TecArt power distribution system is designed for permanent or touring applications where power distribution is required. The unit features an MCB and RCD (Residual Current Device) per channel. The TecArt distro is suitable for the standard 19 inch equipment rack.
SKU: n/a -
Dimmers and power distribution
TecArt Power Distribution Rack Mount 400A 4 way
Contact us for dealer pricing.
The TecArt power distribution system is designed for permanent or touring applications where power distribution is required. The unit features a main Residual Current Device (RCD), main 3 phase circuit breaker and individual breaker per output. The TecArt distro is suitable for the standard 19 inch equipment rack.
The 4-way variant features 400A power lock in/out, with four 32A 3 phase outputs at the back and three 20A single phase outlets at the front.
SKU: n/a
