Rycote
Showing 196–210 of 544 results
-
Microphone Accessories
Rycote Hyper Cardioid Short Shotgun Microphone 15cm, Long Directional Mono Mic 3 Pin XLR Connection
Microphone AccessoriesRycote Hyper Cardioid Short Shotgun Microphone 15cm, Long Directional Mono Mic 3 Pin XLR Connection
The Rycote HC-15 is a hypercardioid short shotgun microphone designed for a wide range of applications in cinema, TV, ENG, live broadcast, sound design, studio and field recording.
The HC-15 combines a moderately directional polar pattern with extremely low self-noise. This provides some level of off-axis rejection and isolation with a precise sound quality to match, making the HC-15 a great all around mic for many recording environments.
FEATURES
Capsule:
• Professional broadcast quality and individually fine-tuned back electret capsulePreamp:
• Compact design
• Ultra low noise circuitry
• Sophisticated RF shielding
• Low power consumptionConnector:
• Gold-plated Neutrik XLR connectorRF-Protection:
• Active in-line filtering
• Fine-tuned mechanical RF shielding
• Thoroughly tested against digital wireless systems and walkie talkiesMaterials:
• Preamp made from non-corrosive machined brass – low impedance to ensure best possible and longest lasting RF shielding
• Capsule / Interference tube made from lightweight machined aluminium
• Weight balanced to help keep center of gravity further back to provide improved handling when using Rycote Lyre shock mounts and slip-on wind protectionPRODUCT CODE: RYC079001
SPECIFICATIONS:
Frequency Range: 50 Hz – 20 kHz
Self Noise: 8.5 dBA (+/- 2 dB)
Polar Pattern: Hypercardioid
Capsule Type: Back Electret Condenser
Output Sensitivity: 45.0 mV/Pa (-26.9 dB)
Max. Output Voltage: 5 V (if relative load is < 2kΩ)
Output Impedance: 100 Ω
Min. Recommended Load: 1 kΩ
Signal / Noise Ratio: 85 dB typical (@ 1 kHz/Pa A-weighted)
CMRR (@ 1 kHz): > 60 dB
Max. Cable Length: 100 m
Powering: P-48
Powering Valid Range: 48-24V (Max SPL reduced at 24V)
Current Consumption: ~ 3.0 mA
Max. SPL: 133 dB SPL (@ 1 kHz (1.0% THD typical)
RFI Shield: Yes
Connector: XLR-3M
Weight: 90 g
Colour: Matte Black w/ Red Accent
Dimensions: Length 155mm x Diameter 19mmCOMPATIBLE RYCOTE WINDSHIELDS
• 10cm SGM Foam
• 10cm Classic Softie
• 10cm Short Fur Softie
• 12cm Super Softie
• Nano Shield Kit NS2-CA
• Cyclone Windshield, Small
• Modular Windshield Kit 2SKU: RYC-RYC079001 -
Microphone Accessories
Rycote Hyper Cardioid Shotgun Microphone 22cm, Long Directional Mono Mic 3 Pin XLR Connection
Microphone AccessoriesRycote Hyper Cardioid Shotgun Microphone 22cm, Long Directional Mono Mic 3 Pin XLR Connection
The Rycote HC-22 is a hypercardioid shotgun microphone designed for a wide range of applications in cinema, TV, ENG, live broadcast, sound design, studio and field recording.
The HC-22 combines a highly directional polar pattern with extremely low self-noise. This provides solid off-axis rejection and isolation with a precise sound quality to match, making the HC-22 a great all around mic for recording environments which may require a more focused recording approach.
FEATURESCapsule:
• Professional broadcast quality and individually fine-tuned back electret capsulePreamp:
• Compact design
• Ultra low noise circuitry
• Sophisticated RF shielding
• Low power consumptionConnector:
• Gold-plated Neutrik XLR connectorRF-Protection:
• Active in-line filtering
• Fine-tuned mechanical RF shielding
• Thoroughly tested against digital wireless systems and walkie talkiesMaterials:
• Preamp made from non-corrosive machined brass – low impedance to ensure best possible and longest lasting RF shielding
• Capsule / Interference tube made from lightweight machined aluminium
• Weight balanced to help keep center of gravity further back to provide improved handling when using Rycote Lyre shock mounts and slip-on wind protectionPRODUCT CODE: RYC079002
SPECIFICATIONS:
Frequency Range: 50 Hz – 20 kHz
Self Noise: 8.5 dB A (+/- 2 dB)
Polar Pattern: Hyper cardioid
Capsule Type: Back Electret Condenser
Output Sensitivity: 48.0 mV/Pa (-26.3 dB)
Max. Output Voltage: 5 V (if relative load is < 2kΩ)
Output Impedance: 100 Ω
Min. Recommended Load: 1 kΩ
Signal / Noise Ratio: 85 dB typical (@ 1 kHz/Pa A-weighted)
CMRR (@ 1 kHz): > 60 dB
Max. Cable Length: 100 m
Powering: P-48
Powering Valid Range: 48-24V (Max SPL reduced at 24V)
Current Consumption: ~ 3.0 mA
Max. SPL: 133 dB SPL (@ 1 kHz (1.0% THD typical)
RFI Shield: Yes
Connector: XLR-3M
Weight: 100 g
Colour: Matte Black w/ Red Accent
Dimensions: Length 221mm x Diameter 19mmCOMPATIBLE RYCOTE WINDSHIELDS
• 18cm SGM Foam
• 18cm Classic Softie
• 18cm Short Fur Softie
• 18cm Super Softie
• Nano Shield Kit NS4-DB
• Cyclone Windshield, Medium
• Modular Windshield Kit 3SKU: RYC-RYC079002 -
Microphone Accessories
Rycote Invision Inv 7hg Mkiii
InVision INV 7HG MKIII
Product Code: 041118
Suitable for Microphones from 19 to 34mm in diameter. Ideal for front-heavy microphones, or microphones used with a Softie or Baby Ballgag windshield.
Main Benefits:
- Virtually indestructible
- Offers much improved isolation from camera noise compared to other on-camera microphone mounts
- No elasticated parts — never sags or needs rethreading
Part of the larger InVision range of noise-reducing microphone shock-mounts, Rycote’s InVision Broadcast, are designed for discreet, low-profile on-camera use in broadcast studio environments where windshielding is not required.
The InVision Broadcast mounts feature Rycote’s latest Lyre suspension systems to offer broadcast professionals the cleanest possible sound, free from unwanted cable or stand-borne noise. They may be used with microphones mounted on desks, stands or boom poles, or suspended mics.
Tech Specs
An InVision set contains two Lyre, an appropriate length mounting bar, and in some cases, a reducing sleeve (InVision INV-4). The Lyre suspension webs of our InVision come in two sizes: – InVision Lyre width: 43 mm – Standard Lyre width: 70 mm Mounting bars come in two sizes: – Standard length: 25 mm – Large length: 70 mm The reducing sleeve allows for smaller microphones (e.g. Schoeps CCM series) to be held by the Lyre.
Compatibility – https://mymic.rycote.com/products/invision-inv-7hg-mkiii/#compatibility
MyMic – https://mymic.rycote.com/products/invision-inv-7hg-mkiii/
SKU: RYC-RY041118 -
Microphone Accessories
Rycote Invision Inv-1
InVision INV-1
Product Code: 041101
Suitable for the AKG C747, Audio-Technica ATM350, Sennheiser ME36, Schoeps CCM, amongst others.
Main Benefits:
- Second-to-none isolation against handling noise and vibrations
- Ideal for microphones with a diameter of 9.5mm
- The lyre system is virtually unbreakable
- No elasticated parts — never sags or needs rethreading
A range of shock mounts and accessories intended for use in studio recording.
The Universal Studio Mount (USM) combines with a new Universal Pop Filter to make a complete vocal microphone suspension and pop filter system that will accommodate virtually any large side address microphone.
Rycote’s InVision models 1 to 3, are designed for discreet, low-profile use of compact microphones in broadcast studio environments where windshielding is not required.
Tech Specs
Width: 11cm
Height: 6cm
Length: 18cmFitted with:
– 2 x 9.5mm clips with InVision (43mm wide) Lyre, and a reducing sleeve
– Standard bar with 25mm (1″) centres
– Sleeve clips onto the microphone connector and the cable, leaving the microphone casing free to be fitted with a foam windscreen if requiredLyre Web: InVision
Front clip: 9.5 mm
Back clip: 9.5 mm
Sleeve: Yes
Bar size: Standard* not suitable for Boom Pole used
Compatibility – https://mymic.rycote.com/products/invision-inv-1/#compatibility
SKU: RYC-RY041101 -
Microphone Accessories
Rycote Invision Inv-2
InVision INV-2
Product Code: 041102
Suitable for the Røde NT6 and Sennheiser MKH8000 series (remote), amongst others.
Main Benefits:
- Second-to-none isolation against handling noise and vibrations
- Ideal for microphones with a front diameter of 20mm and back diameter of 9.5mm
- The lyre system is virtually unbreakable
- No elasticated parts — never sags or needs rethreading
A range of shock mounts and accessories intended for use in studio recording.
The Universal Studio Mount (USM) combines with a new Universal Pop Filter to make a complete vocal microphone suspension and pop filter system that will accommodate virtually any large side address microphone.
Rycote’s InVision models 1 to 3, are designed for discreet, low-profile use of compact microphones in broadcast studio environments where windshielding is not required.
Tech Specs
Width: 11cm
Height: 6cm
Length: 18cm– 1 x 20mm clip at the front and 1 x 9.5mm clip at the rear, with InVision (43mm wide) Lyre
– Standard bar with 25mm (1″) centresLyre Web: InVision
Front clip: 20 mm
Back clip: 9.5 mm
Sleeve: No
Bar size: Standard* not suitable for Boom Pole use
Compatibility – https://mymic.rycote.com/products/invision-inv-2/#compatibility
SKU: RYC-RY041102 -
Microphone Accessories
Rycote Invision Inv-3
InVision INV-3
Product Code: 041103
Suitable for mics including the AKG C430, Behringer C2, DPA 4021 and Sennheiser MKH8000 series with MZX8000.
Main Benefits:
- Second-to-none isolation against handling noise and vibrations
- Fits microphones with a diameter of 20mm
- The lyre system is virtually unbreakable
- No elasticated parts — never sags or needs rethreading
Tech Specs
Width: 11cm
Height: 6cm
Length: 18cmFitted with:
2 x 20mm clips with InVision (43mm wide) Lyre
Standard bar with 25mm (1″) centresLyre Web: InVision
Front clip: 20 mm
Back clip: 20 mm
Sleeve: No
Bar size: Standard* not suitable for Boom Pole use
Compatibility – https://mymic.rycote.com/products/invision-inv-3/#compatibility
SKU: RYC-RY041103 -
Microphone Accessories
Rycote Invision Inv-4
InVision INV-4
Product Code: 041104
Suitable for compact mics such as the Schoeps CCM series and miniature shotgun mics such as the AKG C747. The 9.5mm Lyre clips feature a reducing sleeve which grips the connector and the cable, leaving the body of the microphone free to be completely covered by a foam.
Main Benefits:
- Virtually indestructible
- Offers much improved isolation from camera noise compared to other on-camera microphone mounts
- No elasticated parts — never sags or needs rethreading
Part of the larger InVision range of noise-reducing microphone shock-mounts, Rycote’s InVision Broadcast, are designed for discreet, low-profile on-camera use in broadcast studio environments where windshielding is not required.
The InVision Broadcast mounts feature Rycote’s latest Lyre suspension systems to offer broadcast professionals the cleanest possible sound, free from unwanted cable or stand-borne noise. They may be used with microphones mounted on desks, stands or boom poles, or suspended mics.
Tech Specs
Suitable for mics including the AKG C747, Sennheiser ME36 and Audio-Technica AT853a, AT831b, and AT803b.
Fitted with:
2 x 9.5mm clips with Standard (70mm wide) Lyre, and a reducing sleeve
Standard bar with 25mm (1″) centres
Sleeve clips onto the microphone connector and the cable, leaving the microphone casing free to be fitted with a foam windscreen if requiredAn InVision set contains two Lyre, an appropriate length mounting bar, and in some cases, a reducing sleeve (InVision INV-4). The Lyre suspension webs of our InVision come in two sizes: – InVision Lyre width: 43 mm – Standard Lyre width: 70 mm Mounting bars come in two sizes: – Standard length: 25 mm – Large length: 70 mm The reducing sleeve allows for smaller microphones (e.g. Schoeps CCM series) to be held by the Lyre.
Compatibility – https://mymic.rycote.com/products/invision-inv-4/#compatibility
SKU: RYC-RY041104 -
Microphone Accessories
Rycote Invision Inv-5
InVision INV-5
Product Code: 041105
The INV-5 is suitable for compact microphones such as the Schoeps CCM series when used without a large foam windshield. The single 62 (19/25) Lyre at the front holds a mic body diameter of 19-25mm and the rear single 62 (9.5) Lyre holds connectors of 8-11mm e.g. lemo.
Main Benefits:
- Virtually indestructible
- Offers much improved isolation from camera noise compared to other on-camera microphone mounts
- No elasticated parts — never sags or needs rethreading
Part of the larger InVision range of noise-reducing microphone shock-mounts, Rycote’s InVision Broadcast, are designed for discreet, low-profile on-camera use in broadcast studio environments where windshielding is not required.
The InVision Broadcast mounts feature Rycote’s latest Lyre suspension systems to offer broadcast professionals the cleanest possible sound, free from unwanted cable or stand-borne noise. They may be used with microphones mounted on desks, stands or boom poles, or suspended mics.
Tech Specs
Suitable for the Beyerdynamic CK930 and Neumann KM100 amongst others.
Fitted with:
1 x 20mm clip at the front and 1 x 9.5mm clip at the rear, with Standard (70mm wide) Lyre
Standard bar with 25mm (1″) centresAn InVision set contains two Lyre, an appropriate length mounting bar, and in some cases, a reducing sleeve (InVision INV-4). The Lyre suspension webs of our InVision come in two sizes: – InVision Lyre width: 43 mm – Standard Lyre width: 70 mm Mounting bars come in two sizes: – Standard length: 25 mm – Large length: 70 mm The reducing sleeve allows for smaller microphones (e.g. Schoeps CCM series) to be held by the Lyre.
Compatibility – https://mymic.rycote.com/products/invision-inv-5/#compatibility
SKU: RYC-RY041105 -
Microphone Accessories
Rycote Invision Inv-6
InVision INV-6
Product Code: 041106
The INV-6 is suitable for short small diaphragm condenser microphones of 19 -25mm diameter such as the Sennheiser MKH 8020/40/50 when used with their MZX XLR module. The mount features a pair of Single 72 (19/25) Lyres.
Main Benefits:
- Virtually indestructible
- Offers much improved isolation from camera noise compared to other on-camera microphone mounts
- No elasticated parts — never sags or needs rethreading
Part of the larger InVision range of noise-reducing microphone shock-mounts, Rycote’s InVision Broadcast, are designed for discreet, low-profile on-camera use in broadcast studio environments where windshielding is not required.
The InVision Broadcast mounts feature Rycote’s latest Lyre suspension systems to offer broadcast professionals the cleanest possible sound, free from unwanted cable or stand-borne noise. They may be used with microphones mounted on desks, stands or boom poles, or suspended mics.
Tech Specs
Suitable for the Audix M1280, M-Audio Pulsar II and Sennheiser e906, amongst others.
Fitted with:
2 x 19-25mm universal clips, with Standard (70mm wide) Lyre
Standard bar with 25mm (1″) centres
Maximum microphone length 120mmAn InVision set contains two Lyre, an appropriate length mounting bar, and in some cases, a reducing sleeve (InVision INV-4). The Lyre suspension webs of our InVision come in two sizes: – InVision Lyre width: 43 mm – Standard Lyre width: 70 mm Mounting bars come in two sizes: – Standard length: 25 mm – Large length: 70 mm The reducing sleeve allows for smaller microphones (e.g. Schoeps CCM series) to be held by the Lyre.
Compatibility – https://mymic.rycote.com/products/invision-inv-6/#compatibility
SKU: RYC-RY041106 -
Microphone Accessories
Rycote Invision Inv-6 Heavy
InVision INV-6 Heavy
Product Code: 041117
The INV-6 Heavy is a heavier grade version of the INV-6 which feature firmer Single 82 (19/25) Lyres which will support microphones used with lightweight windshields in ‘run and gun’ scenarios.
Main Benefits:
- Virtually indestructible
- Offers much improved isolation from camera noise compared to other on-camera microphone mounts
- No elasticated parts — never sags or needs rethreading
Part of the larger InVision range of noise-reducing microphone shock-mounts, Rycote’s InVision Broadcast, are designed for discreet, low-profile on-camera use in broadcast studio environments where windshielding is not required.
The InVision Broadcast mounts feature Rycote’s latest Lyre suspension systems to offer broadcast professionals the cleanest possible sound, free from unwanted cable or stand-borne noise. They may be used with microphones mounted on desks, stands or boom poles, or suspended mics.
Tech Specs
Fitted with:
2 x 19-25mm universal clips, with Universal 82 Lyre (70mm wide)
Standard bar with 25mm (1″) centres
Maximum microphone length 120mmAn InVision set contains two Lyre, an appropriate length mounting bar, and in some cases, a reducing sleeve (InVision INV-4). The Lyre suspension webs of our InVision come in two sizes: – InVision Lyre width: 43 mm – Standard Lyre width: 70 mm Mounting bars come in two sizes: – Standard length: 25 mm – Large length: 70 mm The reducing sleeve allows for smaller microphones (e.g. Schoeps CCM series) to be held by the Lyre.
MyMic – https://mymic.rycote.com/products/invision-inv-6-heavy/
SKU: RYC-RY041117 -
Microphone Accessories
Rycote Invision Inv-7
InVision INV-7
Product Code: 041107
A suspension mount for small diaphragm condensers such as the Schoeps CMC series and shotgun mics like the Sennheiser MKH416 when used indoors with a foam.
Main Benefits:
- Virtually indestructible
- Offers much improved isolation from camera noise compared to other on-camera microphone mounts
- No elasticated parts — never sags or needs rethreading
Part of the larger InVision range of noise-reducing microphone shock-mounts, Rycote’s InVision Broadcast, are designed for discreet, low-profile on-camera use in broadcast studio environments where windshielding is not required.
The InVision Broadcast mounts feature Rycote’s latest Lyre suspension systems to offer broadcast professionals the cleanest possible sound, free from unwanted cable or stand-borne noise. They may be used with microphones mounted on desks, stands or boom poles, or suspended mics.
Tech Specs
Suitable for use with Schoeps CMIT-5U, Audio-Technica AT4073a, Sennheiser ME66/K6, Neumann KMR81i, DPA4017, and Beyerdynamic MCE86, Sennheiser MKH range, amongst others.
Fitted with:
2 x 19-25mm universal clips, with Standard (70mm wide) Lyre
Long bar with 70mm (2.75″) centresAn InVision set contains two Lyre, an appropriate length mounting bar, and in some cases, a reducing sleeve (InVision INV-4). The Lyre suspension webs of our InVision come in two sizes: – InVision Lyre width: 43 mm – Standard Lyre width: 70 mm Mounting bars come in two sizes: – Standard length: 25 mm – Large length: 70 mm The reducing sleeve allows for smaller microphones (e.g. Schoeps CCM series) to be held by the Lyre.
Compatibility – https://mymic.rycote.com/products/invision-inv-7-/#compatibility
MyMic – https://mymic.rycote.com/products/invision-inv-7-/
SKU: RYC-RY041107 -
Microphone Accessories
Rycote Invision Inv-8
InVision INV-8
Product Code: 041108
Suitable for mics including the Neumann RSM190 and RSM191, Pearl MS8 and MSH10, and Sony ECM 999, ECM 979, and ECM 959.
Main Benefits:
- Virtually indestructible
- Offers much improved isolation from camera noise compared to other on-camera microphone mounts
- No elasticated parts — never sags or needs rethreading
Part of the larger InVision range of noise-reducing microphone shock-mounts, Rycote’s InVision Broadcast, are designed for discreet, low-profile on-camera use in broadcast studio environments where windshielding is not required.
The InVision Broadcast mounts feature Rycote’s latest Lyre suspension systems to offer broadcast professionals the cleanest possible sound, free from unwanted cable or stand-borne noise. They may be used with microphones mounted on desks, stands or boom poles, or suspended mics.
Tech Specs
Suitable for mics including the Neumann RSM190 and RSM191, Pearl MS8 and MSH10, and Sony ECM 999, ECM 979, and ECM 959.
Fitted with:
2 x 30mm clips, with Standard (70mm wide) Lyre
Long bar with 70mm (2.75″) centresAn InVision set contains two Lyre, an appropriate length mounting bar, and in some cases, a reducing sleeve (InVision INV-4). The Lyre suspension webs of our InVision come in two sizes: – InVision Lyre width: 43 mm – Standard Lyre width: 70 mm Mounting bars come in two sizes: – Standard length: 25 mm – Large length: 70 mm The reducing sleeve allows for smaller microphones (e.g. Schoeps CCM series) to be held by the Lyre.
Compatibility – https://mymic.rycote.com/products/invision-inv-8/#compatibility
SKU: RYC-RY041108 -
Microphone Accessories
Rycote Invision Inv-9
InVision INV-9
Product Code: 041109
Suitable for mics of up to 30mm in diameter, such as the Shure SM57 and SM58, and Neumann’s KMS105.
Main Benefits:
- Virtually indestructible
- Offers much improved isolation from camera noise compared to other on-camera microphone mounts
- No elasticated parts — never sags or needs rethreading
Part of the larger InVision range of noise-reducing microphone shock-mounts, Rycote’s InVision Broadcast, are designed for discreet, low-profile on-camera use in broadcast studio environments where windshielding is not required.
The InVision Broadcast mounts feature Rycote’s latest Lyre suspension systems to offer broadcast professionals the cleanest possible sound, free from unwanted cable or stand-borne noise. They may be used with microphones mounted on desks, stands or boom poles, or suspended mics.
Tech Specs
Suitable for mics of up to 30mm in diameter, such as the Shure SM57 and SM58, and Neumann’s KMS105.
Fitted with:
1 x 30mm clip front & 1 x 19/25mm lyre back , on Standard (70mm) lyres
Large bar- 70mm (2.75″) centresAn InVision set contains two Lyre, an appropriate length mounting bar, and in some cases, a reducing sleeve (InVision INV-4). The Lyre suspension webs of our InVision come in two sizes: – InVision Lyre width: 43 mm – Standard Lyre width: 70 mm Mounting bars come in two sizes: – Standard length: 25 mm – Large length: 70 mm The reducing sleeve allows for smaller microphones (e.g. Schoeps CCM series) to be held by the Lyre.
Compatibility – https://mymic.rycote.com/products/invision-inv-9/#compatibility
SKU: RYC-RY041109 -
Microphone Accessories
Rycote Invision Inv-Bh
InVision INV-BH
Product Code: 041123
Suitable for Microphones from 19 to 34mm in diameter, up to 500 grams in weight and 50 cm length maximum, with use of the 3/8″ female Boom Adaptor.
Main Benefits:
- Virtually indestructible
- Offers much improved isolation from camera noise compared to other on-camera microphone mounts
- No elasticated parts — never sags or needs rethreading
The InVision INV-BH suspension is designed to work with microphones from 19-34 mm in diameter, up to 500 gram in weight & 50 cm length maximum. As with other InVision suspensions, it cannot be used with a basket (blimp) windshield. The INV-BH can be boom mounted, with use of the 3/8″ female Boom Adaptor.
Tech Specs
Dimensions: 180 x 70 x 160 mm
Weight: 90 gram (6.7 oz)
Max. weight: 500 gram (17.6 oz)
Max. Length: 500 mm
Mic Diameters: 19-34 mm
Thread: 3/8″ UNC Female (Brass)Suitable for Microphones from 19 to 34mm in diameter, up to 500 grams in weight and 50 cm length maximum, with use of the 3/8″ female Boom Adaptor.
An InVision set contains two Lyre, an appropriate length mounting bar, and in some cases, a reducing sleeve (InVision INV-4). The Lyre suspension webs of our InVision come in two sizes: – InVision Lyre width: 43 mm – Standard Lyre width: 70 mm Mounting bars come in two sizes: – Standard length: 25 mm – Large length: 70 mm The reducing sleeve allows for smaller microphones (e.g. Schoeps CCM series) to be held by the Lyre.
Compatibility – https://mymic.rycote.com/products/invision-inv-bh/#compatibility
MyMic – https://mymic.rycote.com/products/invision-inv-bh/#compatibility
SKU: RYC-RY041123
