Matthews
Showing 16–30 of 69 results
-
Clamps Half Coupler, Barrel, Grab, C-Clamp and Piper
Matthews C-Clamp 2X Pin 10″
Matthews C Clamps are available in 4″, 6″, 8″, 10″ and 12″ with or without 5/8″ mounting pins or Junior Receivers. Each clamp has a steel channel welded to both sides of the opening for better and safer locking. Clamps made for mounting Baby fixtures have two separate pins at different angles so that the light fixtures may fit with minimal clearance. Junior Receivers are made in two fixed versions. Horizontal and Vertical and a Universal Mounting Junior Receiver which can be used in any one of eight different positions.
Matthews C Clamps are manufactured from premium drop forged steel. It should be noted however, that since the Matthews clamp is an adaptation of a standard C Clamp, there is no effective warranty on the part.
SKU: MAT-429228 -
Clamps Half Coupler, Barrel, Grab, C-Clamp and Piper
Matthews C-Clamp Wmt 2X Pin 12”
Matthews C Clamps are available in 4″, 6″, 8″, 10″ and 12″ with or without 5/8″ mounting pins or Junior Receivers. Each clamp has a steel channel welded to both sides of the opening for better and safer locking. Clamps made for mounting Baby fixtures have two separate pins at different angles so that the light fixtures may fit with minimal clearance. Junior Receivers are made in two fixed versions. Horizontal and Vertical and a Universal Mounting Junior Receiver which can be used in any one of eight different positions.
Matthews C Clamps are manufactured from premium drop forged steel. It should be noted however, that since the Matthews clamp is an adaptation of a standard C Clamp, there is no effective warranty on the part.
SKU: MAT-429603 -
Clamps Half Coupler, Barrel, Grab, C-Clamp and Piper
Matthews C-Clamp WMT 2X Pin 4.0”
Matthews C Clamps are available in 4″, 6″, 8″, 10″ and 12″ with or without 5/8″ mounting pins or Junior Receivers. Each clamp has a steel channel welded to both sides of the opening for better and safer locking. Clamps made for mounting Baby fixtures have two separate pins at different angles so that the light fixtures may fit with minimal clearance. Junior Receivers are made in two fixed versions. Horizontal and Vertical and a Universal Mounting Junior Receiver which can be used in any one of eight different positions.
Matthews C Clamps are manufactured from premium drop forged steel. It should be noted however, that since the Matthews clamp is an adaptation of a standard C Clamp, there is no effective warranty on the part.
SKU: MAT-429594 -
Clamps Half Coupler, Barrel, Grab, C-Clamp and Piper
Matthews C-Clamp Wmt 2X Pin 6.0”
Matthews C Clamps are available in 4″, 6″, 8″, 10″ and 12″ with or without 5/8″ mounting pins or Junior Receivers. Each clamp has a steel channel welded to both sides of the opening for better and safer locking. Clamps made for mounting Baby fixtures have two separate pins at different angles so that the light fixtures may fit with minimal clearance. Junior Receivers are made in two fixed versions. Horizontal and Vertical and a Universal Mounting Junior Receiver which can be used in any one of eight different positions.
Matthews C Clamps are manufactured from premium drop forged steel. It should be noted however, that since the Matthews clamp is an adaptation of a standard C Clamp, there is no effective warranty on the part.
SKU: MAT-429596 -
Clamps Half Coupler, Barrel, Grab, C-Clamp and Piper
Matthews C-Clamp Wmt 2X Pin 8.0”
Matthews C Clamps are available in 4″, 6″, 8″, 10″ and 12″ with or without 5/8″ mounting pins or Junior Receivers. Each clamp has a steel channel welded to both sides of the opening for better and safer locking. Clamps made for mounting Baby fixtures have two separate pins at different angles so that the light fixtures may fit with minimal clearance. Junior Receivers are made in two fixed versions. Horizontal and Vertical and a Universal Mounting Junior Receiver which can be used in any one of eight different positions.
Matthews C Clamps are manufactured from premium drop forged steel. It should be noted however, that since the Matthews clamp is an adaptation of a standard C Clamp, there is no effective warranty on the part.
SKU: MAT-429598 -
Clamps Cardellini, Gaffer Grip, Scissor and Table
Matthews Extendallini
Provides strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes. Features ergonomic handle design and reinforced jaws, and the shaft is 1010 chrome plated steel. Available with 2″ or 3″ Center Jaw and 2″ or 6″ End Jaw. The Center Jaw has a fixed jaw mounted at the base of the Baby Pin portion of the shaft providing strong support for the pin. The End Jaw has the fixed jaw mounted at the end of the threaded portion of the shaft. The Mini Matthellini 3/8″ threaded version is perfect for mounting camera, lighting and many other devices w/ 3/8″ female holes, and also comes with a jam nut to prevent rotation. Superior in tight places!
SKU: MAT-420113 -
Clamps Half Coupler, Barrel, Grab, C-Clamp and Piper
Matthews Grid Clamps
Made to clamp securely on overhead grids, car rigs, or camera car rails for mounting light fixtures. The Baby Grid Clamp can also be inverted with the pin mounting into a Grip Head for spanning pipe between two stands. Clamp will grip a pipe having a minimum diameter of 1-1/4″ (1.660) OD and a maximum diameter of 1-1/2″ (1.990) OD.
SKU: MAT-425157 -
-
-
-
-
Clamps Grip Head
Matthews Griphead 4.5” Magic
Plates now feature two holes of 3/8″ and 5/8″ diameter that eliminate any confusion. New casting offers positive lock in all directions. The strongest and most popular 4-1/2″ GripHead in the industry. Guaranteed to hold.
Weight: 5lbs
Features and Benefits:
Serrated gobo heads insure a strong bite and prevents side roll.
Thrust bearing ensures ease of operation when tightening and loosening head.
Aluminum Magic Gasket ensures once grip head is engaged it will not slip and load won’t sag.
Thick threaded collars ensuring a solid bite from t-handles and set screws.
V-shaped positive lock junior receiver.SKU: MAT-349581 -
Clamps Grip Head
Matthews Griphead 4.5”Magic Black
Matthews Grip Heads are the strongest in the business! Set it and forget it…plates feature two holes of 3/8″ and 5/8″ diameter that eliminate any confusion. New castings offer positive lock in all directions.
Mini Grip Head comes standard in our MiniGrip Kit with 3/8″ and 5/8″ mounting holes.
MICROGrip Head comes in our new MICROGrip series of mounting products for 3/8″ mounting holes (does not accept 5/8″).SKU: MAT-B349581
