Kaiser Fototechnik
Showing 196–210 of 233 results
-
Enlargers and copy stands
Kaiser Fototechnik 5640 RB 560 AL LED Lighting Unit
LED daylight lighting unit with thermo-management, consisting of two light banks for even and soft illumination.
For best reproducibility a thermo-management is necessary because light-emitting diodes also convert energy into heat, although the efficiency of LEDs is much higher than that of conventional light sources. As the temperature rises, both the brightness and the color temperature would change.The integrated thermo-management ensures that the set brightness and color temperature always remain constant, regardless of the room and unit temperature, thus achieving reproducible results. In addition, the LEDs have a longer service life.
This thermo-management includes both sensor-controlled temperature monitoring with dynamic compensation control and elaborate passive cooling via LED board and aluminum housing.
Each light equipped with 272 selected white SMD LEDs, 5600 Kelvin, CRI = 95. Emitted light has absolutely no IR and UV content, is flicker free without residual ripple. Lights can be dimmed separately or synchronously in 1 %-steps from 10 % up to 100 %. Illuminated info screen.
The light intensity of the two LED panels is matched to each other. This results in precisely homogeneous illumination with symmetrical alignment of the two light banks.
Memory function: The copy lighting starts with the brightness that was set before the last switch-off.
Lamp housings made of sturdy anodized aluminum section, can be swiveled, shifted and adjusted in height. Detachable soft screens. Vertical arms with height markings, tiltable with detents. Mounted with strong die-cast clamp bases, clamp width up to 48 mm (1.9 in.). Comes with mains adapter.
Specifications:
Lights
LED arrays: 2 x 272 SMD LEDs
Color temperature: 5600 K
Color rendition index: CRI = 95
LED angle of radiation: 100?
Max. illumination* with soft screen: 6800 lux?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ?w/o soft screen: 8000 lux
* based on uniform illumination of a 16.5 x 11.5 in. flat subjectPower consumption: 2 x ? 40 W
Operating voltage: 24 V
Light emitting area of one light: 58 x 16.5 cm (22.8 x 6.5 in.)
Vertical arms: 76 cm (29.9 in.) length / 20 x 20 mm (0.8 x 0.8 in.) edge dimension?Mains adapter
Input: 100-240 V, 50/60 Hz
Output: 24 V, 4 A
Mains lead: approx. 2.50 m (8.2 ft.)The RB 560 AL lighting unit is suitable for copy stands of the R1 System and RD system.
Accessories
Subject to errors and technical changes.
This product is marketed for the purpose of illumination for image capture. It is not intended for use in other applications.
SKU: KFO-KF-5640 -
Enlargers and copy stands
Kaiser Fototechnik 5641 Polarizers for 5640
For RB 560 AL (5640) and RB 570 AX (5652) LED lighting units.
Eliminates and reduces reflections on non-metallic surfaces (e.g. glass, plastics, lacquer, oil paintings) when copying. (In addition a polarizing filter has to be used in front of the camera lens.)
Dimensions: approx. 60.3 x 16.9 cm (23.7 x 6.7 in.)
2 pieces.
SKU: KFO-KF-5641 -
Enlargers and copy stands
Kaiser Fototechnik 5648 RB 100D LED Lighting Unit.
Daylight-type LED lighting unit with two 100 watt soft lights for even and soft illumination. Dimmable. Vertical arms with 25 x 25 mm (1.0 x 1.0 in.) cross section and strong die-cast clamp bases.
Specifications:
Lights
LED arrays:?????????????????????? 2 x 504 High CRI LEDs
Color temperature:??????????? 5600 Kelvin
Color rendition index:??????? CRI ? 95
Angle of radiation:???????????? 85?
Light emitting area
?????? of one light:???????????????? 51 x 36 cm (20.1 x 14.2 in.)
Power consumption:????????? 2 x 100 W
Operating voltage:???????????? 100 – 240 VVertical arms
Length:?????????????????????????????? 87 cm (34.3 in.)
Cross section:?????????????????? 25 x 25 mm (1.0 x 1.0 in.)
Max. illumination*:????????????? 8200 lux
*based on uniform illumination of a 16.5 x 11.5 in. flat subjectScope of delivery: 2 x soft light, 2 x vertical arm with die-cast clamp base and angle guide for the light, 2 x mains lead, 4 x cable holder.
Suitable for rePRO system copy stands and for RSDmot 1.8 (5600).
Additional information:
Excellent lighting quality due to 504 selected LEDs in each light. 5600 Kelvin color temperature (daylight / neutral color rendering), high color rendition index (CRI) of ? 95. Flicker-free light, free of infrared and UV content.
Specially textured diffuser screens (51 x 36 cm / 20.1 x 14.2 in.) scatter and direct the emitted light and thus provide for a soft illumination and high illuminance.
Brightness can be continuously dimmed between 10 and 100 %. Lights can be controlled individually.
Light housings made of high quality plastic, tiltable and adjustable in height along the vertical arms.
Vertical arms with height markings, tiltable in detent joints. For re-producible settings.
Strong die-cast clamp bases for mounting. Clamp width up to 55 mm (2.2 in.).
Cable holders for attaching the mains leads along the vertical arms.
Lights can also be used as studio lights on suitable stands and fixtures with 16 mm (5/8″) standard spigot.
Subject to errors and technical changes.
This product is marketed for the purpose of illumination for image capture. It is not intended for use in other applications.
?
SKU: KFO-KF-5648 -
Enlargers and copy stands
Kaiser Fototechnik 5652 RB 570 AX LED Lighting Unit
LED daylight lighting unit with thermo-management, consisting of two light banks for even and soft illumination.
For best reproducibility a thermo-management is necessary because light-emitting diodes also convert energy into heat, although the efficiency of LEDs is much higher than that of conventional light sources. As the temperature rises, both the brightness and the color temperature would change.The integrated thermo-management ensures that the set brightness and color temperature always remain constant, regardless of the room and unit temperature, thus achieving reproducible results. In addition, the LEDs have a longer service life.
This thermo-management includes both sensor-controlled temperature monitoring with dynamic compensation control and elaborate passive cooling via LED board and aluminum housing.
Each light equipped with 272 selected white SMD LEDs, 5600 Kelvin, CRI = 95. Emitted light has absolutely no IR and UV content, is flicker free without residual ripple. Lights can be dimmed separately or synchronously in 1 %-steps from 10 % up to 100 %. Illuminated info screen.
The light intensity of the two LED panels is matched to each other. This results in precisely homogeneous illumination with symmetrical alignment of the two light banks.
Memory function: The copy lighting starts with the brightness that was set before the last switch-off.
Lamp housings made of sturdy anodized aluminum section, can be swiveled, shifted and adjusted in height. Detachable soft screens. Vertical arms with height markings, tiltable with detents. Mounted with strong die-cast clamp bases, clamp width up to 55 mm (2.2 in.). Comes with mains adapter.
Specifications:
Lights
LED arrays: 2 x 272 SMD LEDs
Color temperature: 5600 K
Color rendition index: CRI = 95
LED angle of radiation: 100?
Max. illumination* with soft screen: 6800 lux?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ?w/o soft screen: 8000 lux
* based on uniform illumination of a 16.5 x 11.5 in. flat subjectPower consumption: 2 x ? 40 W
Operating voltage: 24 V
Light emitting area of one light: 58 x 16.5 cm (22.8 x 6.5 in.)
Vertical arms: 87 cm (34.3 in.) length / 25 x 25 mm (1.0 x 1.0 in.) edge dimension?Mains adapter
Input: 100-240 V, 50/60 Hz
Output: 24 V, 4 A
Mains lead: approx. 2.50 m (8.2 ft.)The RB 570 AX lighting unit is suitable for copy stands of the rePRP System and for 5600 (from RD System).
Accessories
Subject to errors and technical changes.
This product is marketed for the purpose of illumination for image capture. It is not intended for use in other applications.
SKU: KFO-KF-5652 -
Enlargers and copy stands
Kaiser Fototechnik 5708 RSP 2motion Column
Extremely sturdy column, made of a multi-section special extrusion, black anodized, with printed cm and inch scales with two-level motor-driven adjustment.
- Camera carrier and base board with individual motorized height adjustment.
- Two travel speeds, independent of load.
- Self-limiting worm gear: any height position is exactly held.
- Automatic end switch by magnet sensor. Anti-collision device.
- Cable remote control.
- Detachable base board made of 4 mm aluminium with stabilizing substructure.
- Camera carrier made of die-cast aluminium, horizontally adjustable by parallel guides with friction drive and hand cranks for right-hand/left-hand operation.
- Two blocking screws.
- Camera mounting plate tiltable by +/- 90?.
- Built-in spirit level.
Specifications:
Total height: 216 cm (85 in.)
Column cross section: 120 x 80 mm (4.7 x 3.1 in.)
Maximum load:? on camera carrier: 10 kg (22 lbs.)
??????????????????????? on base board: 15 kg (33 lbs.)
Base board: 100 x 80 cm (39.4 x 31.5 in.)
Camera platform: 13 x 13 cm (5.1 x 5.1 in.)
Connecting thread (interchangeable): 1/4? / 3/8?Accessories
Subject to errors and technical changes.
SKU: KFO-KF-5708 -
Enlargers and copy stands
Kaiser Fototechnik 5709 RSP Xtra Column
Extremely sturdy column, made of a multi-section special extrusion, black anodized, with printed cm and inch scales.
- Camera carrier with motorized height adjustment.
- Two travel speeds, independent of load.
- Self-limiting worm gear: any height position is exactly held.
- Automatic end switch by magnet sensor.
- Cable remote control.
- Camera carrier made of die-cast aluminium, horizontally adjustable by parallel guides with friction drive and hand cranks for right-hand/left-hand operation.
- Two blocking screws.
- Camera mounting plate tiltable by +/- 90?.
- Built-in spirit level.
Specifications:
Total height: 216 cm (85 in.)
Column cross section: 120 x 80 mm (4.7 x 3.1 in.)
Maximum load: 15 kg (33 lbs.)
Camera platform: 13 x 13 cm (5.1 x 5.1 in.)
Connecting thread (interchangeable): 1/4? / 3/8?Accessories
Subject to errors and technical changes.
SKU: KFO-KF-5709 -
Enlargers and copy stands
Kaiser Fototechnik 5710 RSP 2motion Copy Stand
Heavy-duty copy stand for analogue and digital image capturing work with two-level motor-driven adjustment.
- Accepts originals up to 100 x 80 cm (39.4 x 31.5 in.).
- Extremely sturdy column, made of a multi-section special extrusion, black anodized, with printed cm and inch scales.
- Column foot made of double strutted steel tube.
- Steel socket for bolting the column.
- Four levelling feet.
- Detachable base board made of 4 mm aluminium with stabilizing substructure.
- Camera carrier made of die-cast aluminium, horizontally adjustable by parallel guides with friction drive and hand cranks for right-hand/left-hand operation.
- Two blocking screws.
- Camera mounting plate tiltable by +/- 90?. Built-in spirit level.
- Camera carrier and base board with individual motorized height adjustment.
- Two travel speeds, independent of load.
- Self-limiting worm gear: any height position is exactly held.
- Automatic end switch by magnet sensor.
- Anti-collision device.
- Cable remote control.
Specifications:
- Total height: 227 cm (89.4 in.)
- Maximum working span: 160 cm (63 in.)
- Column cross section: 120 x 80 mm (4.7 x 3.1 in.)
- Maximum load on camera carrier: 10 kg (22 lbs.)
- Maximum load on base board: 15 kg (33 lbs.)
- Base board: 100 x 80 cm (39.4 x 31.5 in.)
- Camera platform: 13 x 13 cm (5.1 x 5.1 in.)
- Connecting thread (interchangeable): 1/4? / 3/8?
- Required floor space (WxD) : 100 x 126 cm (39.4 x 49.6 in.)
Accessories
Subject to errors and technical changes.
SKU: KFO-KF-5710 -
Enlargers and copy stands
Kaiser Fototechnik 5711 RSP Xtra Copy Stand
Heavy-duty copy stand for analogue and digital image capturing work with motor-driven height adjustment.
- Extremely sturdy column, made of a multi-section special extrusion, black anodized, with printed cm and inch scales.
- Column foot made of double strutted steel tube.
- Steel socket for bolting the column.
- Four levelling feet.
- Camera carrier made of die-cast aluminium, horizontally adjustable by parallel guides with friction drive and hand cranks for right-hand/left-hand operation.
- Two blocking screws. Camera mounting plate tiltable by +/- 90?.
- Built-in spirit level.
- Camera carrier with motorized height adjustment.
- Two travel speeds, independent of load.
- Self-limiting worm gear: any height position is exactly held. Automatic end switch by magnet sensor.
- Cable remote control.
Stand is supplied without baseboard, intended to be used with Table for Copying Works?5712, with Table 5630?or custom-made devices.
Specifications:
- Total height: 227 cm (89.4 in.)
- Column cross section: 120 x 80 mm (4.7 x 3.1 in.)
- Maximum load: 15 kg (33 lbs.)
- Camera platform: 13 x 13 cm (5.1 x 5.1 in.)
- Connecting thread (interchangeable): 1/4? / 3/8?
- Required floor space (WxD): 83 x 114 cm (32.7 x 44.9 in.)
Accessories
Subject to errors and technical changes.
SKU: KFO-KF-5711 -
Enlargers and copy stands
Kaiser Fototechnik 5712 Table for Copying
Wheeled table for RSP Xtra (5711) copy stand.
- Sturdy steel tube construction, lower rods with additional track rollers for sliding on the RSP Xtra copy stand base.
- Matt-grey, plastic-laminated base board 86 x 3.2 x 60 cm (33.9 x 1.3 x 23.6 in.).
Four casters (two lockable). - Dimensions (WxHxD): 92 x 49 x 68 cm (36.2 x 19.3 x 26.8 in.)
- R1 and RD system columns can be mounted via base (optional, 4427 resp. 5625)
Accessories
SKU: KFO-KF-5712 -
Enlargers and copy stands
Kaiser Fototechnik 5771 Book Holder 44/41
Holding device with glass pressure plate for the exact positioning when doing copy work from books, magazines and newspapers.
In the photo lab the book holder is also suitable for making contact prints from negatives on photographic paper and for alternative photographic processes using contact printing.
Solid base plate with non-slip coating on top and non-slip feet underneath. 6 mm (0.2 in.) thick glass pressure plate, foldable and variable in height. To work more ergonomically, more efficiently and original-friendly at a particular height, you can lock the glass pressure plate into a position between 0 and 145 mm (5.7 in.).
Several 28 x 18 cm (11 x 7.1 in.) preformed foam elements of various thickness are used to compensate for the height of an open book.
Black cardboard sheets can be placed under the page you want to copy so that the print on the back side or subjacent side cannot shine through the paper. ?
5771: Book Holder 44/41
With high-quality, color-neutral crystal glass pressure plate.- For formats up to: 44 x 41 cm (17.3 x 16.1 in.)
- Maximum height of original (book etc.): 145 mm (5.7 in.)
- Dimensions (WxHxD): 52.9 x 22.6 x 44.4 cm (20.8 x 8.9 x 17.5 in.)Comes with 8 preformed foam elements (2 x 20 mm / 0.8 in., 2 x 10 mm / 0.4 in., 4 x 5 mm /0.2 in. thick) and 2 black A4 cardboard sheets (29.7 x 21 cm / 11.7 x 8.3 in.).
5774: Book Holder 69/50 AR (with anti-reflective coating)
With extra white glass pressure plate with anti-reflective coating on both sides. The optical interference coating ensures high color neutrality and minimum residual reflection (< 0.5 %).- For formats up to:? 69 x 50 cm (27.2 x 19.7 in.), e.g. also for Berlin or Swiss format newspapers (opened size 630 x 470 mm / 24.8 x 18.5 in. resp. 640 x 475 mm / 25.2 x 18.7 in.)
- Maximum height of original (book etc.): 145 mm (5.7 in.)
- Dimensions (WxHxD): 76.9 x 22.6 x 55.4 cm (30.3 x 8.9 x 21.8 in.)
- Comes with 16 preformed foam elements (4 x 20 mm / 0.8 in., 4 x 10 mm / 0.4 in., 8 x 5 mm /0.2 in. thick) and 4 black cardboard sheets: 2 x A4 (29.7 x 21 cm / 11.7 x 8.3 in.) and 2 x A3 (42 x 29.7 cm / 16.5 x 11.7 in.).
Subject to errors and technical changes.
SKU: KFO-KF-5771
