Kaiser Fototechnik
Showing 136–150 of 233 results
-
Enlargers and copy stands
Kaiser Fototechnik 5360 “reprokid” Copy Stand
Super-compact camera stand for small, lightweight cameras (digital compacts, CCD cameras, etc.).
- Non-reflective, matt-black baseboard.
- Column with cm/inch scale.
- Height-adjustable camera arm. 1/4? mounting thread.
- Baseboard (WxHxD): 32 x 1.9 x 38 cm (12.6 x 0.7 x 15 in.)
- Column height:?59 cm (23.2 in.)
- Max. load:?1 kg (2.2 lbs.)
- Includes lighting unit with two E 27 screw-in mounts for lamps up to 250 Watt (supplied without lamps).
- Power cables:?2 x 2.5 m (8 ft. 2 in.). with cord switch.
Suitable lamp:
3128: Reflector lamp 150 W, 3200 K, 1 piece?
5361:?”reprokid” Camera Stand
Same as 5360, but without lighting unit.
Accessories
?
SKU: KFO-KF-5360 -
Enlargers and copy stands
Kaiser Fototechnik 5361 Copy Stand
Super-compact camera stand for small, lightweight cameras (APS, digital compacts, CCD cameras, etc.).
- Non-reflective, matt-black baseboard.
- Column with cm/inch scale. Height-adjustable camera arm. 1/4″ mounting thread.
Specs
- Baseboard (WxHxD): 32 x 1.9 x 38 cm (12.6 x 0.7 x 15 in.)
- Column height: 59 cm (23.2 in.)
- Max. load: 1 kg (2.2 lbs.)
SKU: KFO-KF-5361 -
Enlargers and copy stands
Kaiser Fototechnik 5411 Copy Stand RS 2 XA
Non-reflective matt grey baseboard with printed fine grid and cm/inch scale.
- Matt-black anodised aluminum section tube column with cm/inch scale.
- Hand-cranked height adjustment by friction drive in plastic bearings.
- Column can be mounted rotated 180?
- With horizontally adjustable camera arm to change the distance to the column, moves approx. 7 cm (2.7 in.) back and forth. 1/4″ mounting thread.
- Baseboard (WxHxD): approx. 400 x 25 x 500 mm (15.7 x 1 x 19.7 in.)
- Column height: approx. 76 cm (30 in.)
- Maximum load: 1.5 kg (3.3 lbs)
SKU: KFO-KF-5411 -
Enlargers and copy stands
Kaiser Fototechnik 5464 RB 218N HF Daylight Lighting Unit
RB 218N HF Lighting unit with an all-electronic high-frequency operating system (approx. 40 kHz) for immediate ignition and flicker-free operation.
- Two small light banks, each equipped with a cold light fluorescent lamp, tiltable and adjustable in height.
- Angle of vertical arms adjustable by lock joint.
- Mounted with strong die-cast clamp bases. Clamp width 48 mm (1.9 in.)
- Lamps: 2 x 18 watts
- Color temperature: 5400 K
- CRI: 90-100
- Replacement lamp: 5458
SKU: KFO-KF-5464 -
-
Enlargers and copy stands
Kaiser Fototechnik 5467 RB 5020 DS2 LED Lighting Unit
LED daylight lighting unit with two light banks for even and soft illumination.
- Emitted light has absolutely no IR and UV content.
- DC operation provides for flicker free light without residual ripple.
- Each light equipped with?105 selected white SMD LEDs.
- Lights can be dimmed separately or in conjunction.
- Removable diffusing cover.
- Lights can be tilted, swiveled and adjusted in height.
- Vertical lamp arms tiltable with detents.
- Mounted with strong die-cast clamp bases, clamp width up to 48 mm (1.9 in.).
Specifications:
- LED array: 2 x 105 SMD LEDs
- Color temperature: 5600 K
- Color rendering index: CRI=95
- LED angle of radiation: 110?
- Power consumption: 2 x17 W
- Illuminance on subject surface*: 4300 lux
The RB 5020 DS2 lighting system is suitable for all R2 System copy stands.
?*?measured with highest possible evenness of?illumination of a?9 x 12? flat subject
SKU: KFO-KF-5467 -
Enlargers and copy stands
Kaiser Fototechnik 5504 Metal Base Plate
Dark grey finished steel plate with die-cast base for 4407, 4475 or other R1 system columns.
- Receptacle for accessories (e.g. 5040) with 16 mm (0.6 in.) standard spigot, mounts on right or left side. Height adjustable feet.
- Dimensions (WxD): 45 x 45 cm (17.7 x 17.7 in.)
- Thickness of plate: 8 mm (0.3 in.)
- Weight: approx. 13.5 kg (29.7 lbs.)
In combination together with the column 4407 or 4475 and the camera arm 5523 also useable as a Kaiser Vertical Stand
SKU: KFO-KF-5504 -
Enlargers and copy stands
Kaiser Fototechnik 5507 “microdrive” Copy Stand
- Non-reflecting matt gray base board with printed fine grid.
- Feet adjustable in height.
- Spirit level in column base.
- Extra-wide and extremely vibration-resistant column of dull black anodized aluminium tubing with cm and inch scales.
- Hand crank-operated height adjustment by friction drive on plastic bearings.
- Weight compensation by roll-off spring mechanism.
- Column can be mounted rotated 180?.
Specs
- Base board: approx. 450 x 500 x 28 mm (17.7 x 19.7 x 1.1 in.)
Column height: approx. 1000 mm (39.4 in.)
Downloads
SKU: KFO-KF-5507 -
Enlargers and copy stands
Kaiser Fototechnik 5508 Base Frame
For converting RS1 system and RSD (5602), RSD mot (5603) copy stands from table to free-standing model.
- Also suitable for all Kaiser baseboards from 45 x 50 cm to 60 x 80 cm (17.7 x 19.7 in. to 23.6 x 31.5 in.).
- Height-adjustable feet.
- Slide-in compartment for control box of optional lighting unit.
- Dimensions (WxHxD): approx. 580 x 510 x 595 mm (22.8 x 20.1 x 23.4 in.)
SKU: KFO-KF-5508 -
Enlargers and copy stands
Kaiser Fototechnik 5510 Copy Stand RS 1
Non-reflecting matt gray base board with printed fine grid.
- Feet adjustable in height. Spirit level in column base.
- Extra-wide and extremely vibration-resistant column of dull black anodized aluminium tubing with cm and inch scales.
- Hand crank-operated height adjustment by friction drive on plastic bearings. Weight compensation by roll-off spring mechanism.
- Column can be mounted rotated 180?.
Specs
- Base board: approx. 450 x 500 x 28 mm (17.7 x 19.7 x 1.1 in.)
- Column height: approx. 1000 mm (39.4 in.)
SKU: KFO-KF-5510 -
Enlargers and copy stands
Kaiser Fototechnik 5511 Copy Stand RS 1
Non-reflecting matt gray base board with printed fine grid. Feet adjustable in height. Spirit level in column base. Extra-wide and extremely vibration-resistant column of dull black anodized aluminium tubing with cm and inch scales. Hand crank-operated height adjustment by friction drive on plastic bearings. Weight compensation by roll-off spring mechanism. Column can be mounted rotated 180?.
Base board: approx. 450 x 500 x 28 mm (17.7 x 19.7 x 1.1 in.)
Column height: approx. 1000 mm (39.4 in.)5511: RS 1 Camera Stand?
with RT 1 copy and titling arm with two camera mounting points for portrait and landscape formats.
Mounting the camera on the inside of the camera carrier for landscape format produces images which are not upside-down. This is very convenient for comic, animation and stop-motion films.
A parallel guide makes the camera platform longitudinally adjustable, and it can be locked in any position. The entire copy and titling arm is tiltable to allow for reproduction of vertical subjects.
With interchangeable ??/1/8? connecting thread.
Maximum load: 3 kg.5510: RS 1 Camera Stand?
with RA 1 camera arm with interchangeable threaded bush 1/4?/ 3/8? and camera adjustment device.
Maximum load: 4 kg (8.8 lbs.)5507: RS 1 “microdrive” Camera Stand?
Same as RS 1 Camera Stand (5510), but with hand-cranked, rack-and-pinion height adjustment, additionally counter-balanced by a built-in scroll spring. Additional fine drive with 1:6 step-down transmission for super-fine adjustment. Locking screw prevents inadvertent changing of the adjusted heightSubject to errors and technical changes.
SKU: KFO-KF-5511 -
Enlargers and copy stands
Kaiser Fototechnik 5512 Copy Stand RSX
Big non-reflecting matt grey baseplate with printed grid, cm and inch scale.
- Feet adjustable in height.
- Spirit level in column base.
- Especially wide and low-vibration column made of matt black anodized aluminium tubing with cm and inch scale.
- Height adjustment with hand crank and rack with extra weight compensation by integrated coil spring.
- Blocking screw to stop accidental changing of height.
- Column can be mounted rotated 180?.
With RTX camera arm (5522):
- Camera carrier turns ? 90? and can be blocked in every position. With spirit level for fine adjustment.
- Camera mount horizontally adjustable via parallel guides with fine adjustment.
- Camera can be mounted on the inside or outside of the camera carrier. Mounting the camera on the inside of the camera carrier for landscape format produces images which are not upside-down. This is very convenient for comic, animation and stop-motion films.
- The entire copy and titling arm is tiltable to allow for reproductions of vertical subjects.
- With interchangeable 1/4″/ 3/8″ connecting thread.
- Base board (WxHxD): approx. 600 x 500 x 32 mm (23.6 x 19.7 x 1.3 in.)
- Height of column: approx. 1.20 m (4 ft.)
- Maximum load: 3.5 kg (7.7 lbs.)
SKU: KFO-KF-5512 -
Enlargers and copy stands
Kaiser Fototechnik 5513 Copy Stand RS 10
Large non-reflecting, matt grey baseboard with a printed fine grid and cm/inch scale.
- Height-adjustable feet. Spirit level integrated into the base.
- Especially wide, virtually vibration-free column made of matt black anodised aluminium section tube with cm/inch scale.
- Hand-cranked, rack-and-pinion height adjustment, additionally counter-balanced by a built-in scroll spring.
- Locking screw prevents inadvertent changing of the adjusted height.
- Column can be mounted rotated 180?.
- RTP camera arm (5524) with precision, parallel-guided horizontal adjustment over approx. 8 cm (3.1 in.). Reversible mounting thread 1/4″/ 3/8″.
- Including dust cover.
- Baseboard (WxHxD): approx. 600 x 32 x 500 mm (23.6 x 1.3 x 19.7 in.)
- Column height: approx. 1 m (39 in.)
- Maximum load: 4 kg (8.8 lbs.)
SKU: KFO-KF-5513 -
Enlargers and copy stands
Kaiser Fototechnik 5517 Copy Base Board 450 x 500 mm
Matt grey laminated base board with mounted base for attaching column.
- Printed fine grid with cm and inch scale.
- Spirit level in base.
- Individually height-adjustable feet.
Dimensions (WxDxH):
5517: approx. 450 x 500 x 28 mm (17.7 x 19.7 x 1.1 in.)
5518: approx. 600 x 500 x 32 mm (23.6 x 19.7 x 1.3 in.)
5519: approx. 800 x 600 x 32 mm (31.5 x 23.6 x 1.3 in.)
(Dimensions excluding base and feet)SKU: KFO-KF-5517
