Avenger
Showing 196–210 of 234 results
-
Arms Grip/Extension, Boom and Tripod Mount
Avenger D800KIT Kit Grip Head & Arm for Scrims incl D200B Grip E600 16m Pin D520B 40″ Arm C1575B Clamp
Arms Grip/Extension, Boom and Tripod MountAvenger D800KIT Kit Grip Head & Arm for Scrims incl D200B Grip E600 16m Pin D520B 40″ Arm C1575B Clamp
The Avenger D800KIT Grip Kit is a set of 4 grip tools that can be used all together, individually or in combination with stands to support scrims, flags, light shaping tools and lighting fixtures. The Grip Kit consists of the C1575B Super Clamp, D200B Grip Head, D520B Grip Arm and E600 snap-in baby pin. The C1575B Super Clamp can be clamped on to stands and AutoPoles, connects to the E600 Hex snap-in pin which can be inserted into the D200B and then you can add the D520 Grip Arm to position scrims, flags, floppies and other light shaping tools as needed. Total flexibility and control using 4 great tools! Recommended Accessories: A0025B, A0030CS, A0045B, 032B, 432-3.7B, A2030DCB, A2033FCB, A5033, A5029.
SKU: AVN-D800KIT -
Adaptors, Spigots and Studs
Avenger E200 Adaptor for Stand 1 1/8 to 5/8 or 28mm to 16mm attach lights and accessories
Adaptors, Spigots and StudsAvenger E200 Adaptor for Stand 1 1/8 to 5/8 or 28mm to 16mm attach lights and accessories
The Avenger E200 stand adapter (converts a Junior Female 28 mm/ 1 1/8 inch Receiver to a 16 mm/ 5/8 inch baby male spigot/stud). This versatile adapter is ideal for use on any light stand, clamp or roller stand that has a universal head or combo mount. The small hole on the junior side of the adapter allows for safety pins to be engaged when needed for additional safety especially when suspending fixtures from clamps like the C150. The E200 works well with: Combo Stands (A1020B, A1020CS, A4050CS, A5036CS, B6030CS, B6039CS, B6029X, B6040X, B6040XK), Roller Bases (297BBASE, 299BBASE), C-Stands (A2030D, A2030DCB, A2030DKIT, A2030DCBKIT), Clamps C150, C100, C345-1, C345K-1.
SKU: AVN-E200 -
Adaptors, Spigots and Studs
Avenger E270 Adaptor 25mm male spigot 17mm female socket
The Avenger E270 is an adapter in chrome steel that converts a 25 mm Japanese junior style receiver to a Japanese style 17 mm baby receiver. This adapter works well with any type of 25 mm receiver. Recommended Accessories: D210J, D210JB, D420, C1575B,C820, C822, E600, D800KIT.
SKU: AVN-E270 -
Adaptors, Spigots and Studs
Avenger E600 Pin Snap-In 16mm Male Alu Perfect for Super Clamp
The Avenger E600 Snap In Baby Pin in aluminium is designed to mate seamlessly with the hexagonal receivers found on 035, C1575B and C1550 Super Clamp™. It has a hexagonal end that fits into hex 16 mm/ 5/8 inch receiver. The 16 mm/ 5/8 inch pin works with many LED panels, HMI’s, compact lights, strobe units and other lighting and grip accessories.
Recommended Accessories: C1575B, C1550, D244N, 244, 014-14, 014-38, 026, F831TH, 244MINI.
SKU: AVN-E600 -
Adaptors, Spigots and Studs
Avenger E600C 5/8” Snap-In Steel Pin For Super Clamp
The Avenger E600C Snap In Pin has a hexagonal end that snaps into a Super Clamp or similar grip accessory. The other end will accept a lighting fixture that has a 5/8″ female receiver. It is fabricated from chrome-plated steel.
SKU: AVN-E600C -
Adaptors, Spigots and Studs
Avenger E610 Snap In Baby Pin 5/8″ 16mm to Wood Screw
The Avenger E610 Baby Pin is a zinc-plated 5/8″ steel stud with a wood screw that can be permanently or temporarily mounted directly into a wood surface. The zinc-plating prevents corrosion of the steel pin.
SKU: AVN-E610 -
Adaptors, Spigots and Studs
Avenger E650 Pin with Collar 6” 5/8” 16mm Stud 7/8” Collar
The Avenger E650 6.0″ Pin with Collar is a zinc-plated steel 16mm (5/8″) diameter stud with a 22mm (7/8″) collar. The collar acts as an anchor to prevent the pin from sliding completely through a grip clamp.
SKU: AVN-E650 -
-
Arms Grip/Extension, Boom and Tripod Mount
Avenger F100 Arm Jr Offset Chrome Steel 50cm 28mm Pin 28mm Receiver
Arms Grip/Extension, Boom and Tripod MountAvenger F100 Arm Jr Offset Chrome Steel 50cm 28mm Pin 28mm Receiver
The Avenger F100 Junior Offset Arm allows you place a light over an obstruction such as a wall or offset a large light fixture from its stand. It has a length of 50cm. The F100 mounts to a stand with a 28mm (1 1/8″) Junior receiver and will accept a light fixture that has a Junior 28mm (1 1/8″) pin.
SKU: AVN-F100 -
Pump Cups
Avenger F1000 Pump Cup Swivel w 16mm Spigot 2kg Payload Non-porpous surfaces
The Avenger F1000 Pump Cup (suction cup) with a 16 mm/ 5/8 in baby Swivel Spigot or pin is ideal for mounting small lights and camera systems onto flat, non-porous surfaces like glass and metal. Pump cups are ideal for rigging car shoots especially when combined with other grip accessories like grip heads and grip arms. Place the pump on the desired surface and pump the blue plunger until you no longer can see the red line. If the red line appears you need to re-pump the pump cup. Capable of holding up to 2 kg/ 4.4 lb, the F1000 is a perfect tool when non-traditional surfaces are used for positioning of lighting and grip tools. Recommended Accessories: D200, D520, D500, 014-14, 014-38, C155.
SKU: AVN-F1000 -
Pump Cups
Avenger F1100 Pump Cup w 16mm spigot 2kg Payload Non-porous surfaces
The Avenger F1100 Pump Cup (suction cup) with a 16 mm/ 5/8 in baby fixed spigot or pin is ideal for mounting small lights and camera systems onto flat, non-porous surfaces like glass and metal. Pump cups are ideal for rigging car shoots especially when combined with other grip accessories like grip heads and grip arms. Place the pump on the desired surface and pump the blue plunger until you no longer can see the red line. If the red line appears you need to re-pump the pump cup. Capable of holding up to 2 kg/ 4.4 lb the F1100 is a perfect tool when non-traditional surfaces are used for positioning of lighting and grip tools. Recommended Accessories: D200, D520, D500, 014-14, 014-38, C155.
SKU: AVN-F1100 -
-
Polyholders/Forks Foamcore
Avenger F1504 Fork w Pin for Foam/Styrene Connect to a Super Clamp or Grip Head
Polyholders/Forks FoamcoreAvenger F1504 Fork w Pin for Foam/Styrene Connect to a Super Clamp or Grip Head
This useful tool made in aluminium alloy can hold a piece of foam core, used usually to soften lights in studio and on location. It has four tines to pierce and hold a sheet. The 16mm pin can be attached to either a super clamp or grip head.
SKU: AVN-F1504 -
Polyholders/Forks Foamcore
Avenger F1521 Polyholder 2” w 5/8” Spigot Connect to a Super Clamp or Grip Head
Polyholders/Forks FoamcoreAvenger F1521 Polyholder 2” w 5/8” Spigot Connect to a Super Clamp or Grip Head
The polyholder has a 16mm spigot. The “board” clamp has two sides, one white for the reflective side of the polystyrene; one black for the black lightstopping side. It doesn’t damage the poly. Plate dimensions: 150 x 220mm. You can connect it to a super clamp or grip head.
SKU: AVN-F1521
