Avenger
Showing 166–180 of 234 results
-
Clamps Cardellini, Gaffer Grip, Scissor and Table
Avenger C500 Grip Gaffer Pelican style 10Kg Payload 15-80mm Wide 16 & 17mm Studs
Clamps Cardellini, Gaffer Grip, Scissor and TableAvenger C500 Grip Gaffer Pelican style 10Kg Payload 15-80mm Wide 16 & 17mm Studs
The Avenger C500 Pelican Gaffer Grip is one of the most robust clamps you will use on location, on set or in studio! Made in Gravity Cast aluminium this clamp has a clamping range from 15 to 80 mm/0.59 to 3.14 inch and can support up to 10 kg/22 lb. The clamp has 2- 16 mm/ 5/8 In spigots with one of the spigots that is removable converting it to a receiver. The clamp is 371 mm/14.6 in long and is 80 mm/3.14 in wide. Recommended Accessories: C155, D200, D200B, A0025B, A0035B, E390, 014-14, 014-38, D244N.
SKU: AVN-C500 -
Arms Grip/Extension, Boom and Tripod Mount
Avenger C590 Stand Extension Conka Bonka set of 3
This is a chrome-plated Avenger/Manfrotto C590 Conka Bonka Stand Extension Kit. This three piece kit can be used to extend the height or reach of a cine-stand or boom.
Each extension is fitted with a junior stud on one end, and a locking junior receptor on the other. Their respective lengths are: 67.5cm/26.6″, 27cm/10.6″, 15cm/6.0″.
SKU: AVN-C590 -
Hangers Telescopic, Pantographs, Sky Track and Operating Poles
Avenger C820 Hanger Telescopic with stirrup 117 cm weight 5.4Kg
Hangers Telescopic, Pantographs, Sky Track and Operating PolesAvenger C820 Hanger Telescopic with stirrup 117 cm weight 5.4Kg
The Avenger C820 telescopic hanger with stirrup is a 2 section hanger, with a single riser extension. This telescopic hanger has a minimum length of 117 cm/46.1 in and can extend as long as 197 cm/77.6 in and will hold capacities up to 40 kg/88 lb. The stirrup attachment on the end of this hanger is Ø 40 mm/1.6 in. The grid clamp attaches to pipes, truss or grids and is also used to control the extension of the first section of the hanger. The clamping range is 25 to 55 mm/1 to 2.16 in. A safety cable with locking pin is included to add extra security for the extension. Recommended Accessories: C155, C1575B, C210, C150, C100, C338, C339UH, C461-1, C465-1, C345-1, C345K-1.
SKU: AVN-C820 -
Hangers Telescopic, Pantographs, Sky Track and Operating Poles
Avenger C822 Hanger Long Telescopic with stirrup 210-379 cm 6.8kg weight
Hangers Telescopic, Pantographs, Sky Track and Operating PolesAvenger C822 Hanger Long Telescopic with stirrup 210-379 cm 6.8kg weight
The Avenger C822 telescopic hanger with stirrup is an extra long 2 section hanger, with a single riser extension. This telescopic hanger has a minimum length of 210 cm/82.7 in and can extend as along as 379 cm/149.2 in and will hold capacities up to 40 kg/88 lb. The stirrup attachment on the end of this hanger is Ø 40 mm/1.6 in The grid clamp used to attach to pipes, truss or grids is also used to control the extension of the first section of the hanger. The clamping range is 25 to 55 mm/1 to 2.16 in. A safety cable with locking pin is included to add extra security for the extension. Recommended Accessories: C155, C1575B, C210, C150, C100, C338, C339UH, C461-1, C465-1, C345-1, C345K-1.
SKU: AVN-C822 -
Hangers Telescopic, Pantographs, Sky Track and Operating Poles
Avenger C825 Hanger Double Telescopic 121-201cm weight 5.1Kg
Hangers Telescopic, Pantographs, Sky Track and Operating PolesAvenger C825 Hanger Double Telescopic 121-201cm weight 5.1Kg
The Avenger C825 telescopic hanger with universal (combo) head is a 2 section hanger, with a single riser extension. This telescopic hanger has a minimum length of 121 cm/47.6 in and can extend as long as 201 cm/79.1 in. The junior receiver will hold capacities up to 40 kg/88 lb while the retractable 16 mm/ 5/8 in pin can hold a capacity up to 10 kg/22 lb. The grid clamp attaches to pipes, truss or grids and is also used to control the extension of the first section of the hanger. The clamping range is 25 to 55 mm/1 to 2.16 in. Two safety cables with locking pins are included to add extra security for the extension and the inserted junior pins which mount into the receiver. Recommended Accessories: C155, C1575B, C210, C150, C100, C338, C339UH, C461-1, C465-1, C345-1, C345K-1.
SKU: AVN-C825 -
Hangers Telescopic, Pantographs, Sky Track and Operating Poles
Avenger C827 Hanger Long Telescopic with universal head 212-381cm 6.8kg weight
Hangers Telescopic, Pantographs, Sky Track and Operating PolesAvenger C827 Hanger Long Telescopic with universal head 212-381cm 6.8kg weight
The Avenger C827 telescopic hanger with universal (combo) head is an extra long 2 section hanger, with a single riser extension. This telescopic hanger has a minimum length of 121 cm/47.6 in and can extend as along as 201 cm/79.1 in. The junior receiver will hold capacities up to 40 kg/88 lb while the retractable 16 mm/ 5/8 in pin can hold a capacity up to 10 kg/22 lb. The grid clamp attaches to pipes, truss or grids and is also used to control the extension of the first section of the hanger. The clamping range is 25 to 55 mm/1 to 2.16 in. Two safety cables with locking pins are included to add extra security for the extension and the inserted junior pins which mount into the receiver. Recommended Accessories: C155, C1575B, C210, C150, C100, C338, C339UH, C461-1, C465-1, C345-1, C345K-1.
SKU: AVN-C827 -
Hangers Telescopic, Pantographs, Sky Track and Operating Poles
Avenger C880 Head Universal
The Avenger C880 Universal Head is part of the C825 Double Telescopic Hanger. It accepts a Junior (28mm, 1-1/8″) stud or spigot. Its retractable 16mm (5/8″) stud can also support a fixture or grip accessory with a matching receiver.
SKU: AVN-C880 -
Hangers Telescopic, Pantographs, Sky Track and Operating Poles
Avenger C888UH Hanger Triple Telescopic with universal head 76-161cm 5.6kg weight
Hangers Telescopic, Pantographs, Sky Track and Operating PolesAvenger C888UH Hanger Triple Telescopic with universal head 76-161cm 5.6kg weight
The Avenger C888UH offset telescopic hanger with universal (combo) head is a 3 section compact hanger, with a double riser extension. This compact telescopic hanger has a minimum length of 76 cm/29.9 in and can extend as long as 161 cm/63.4 in. The junior receiver will hold capacities up to 40 kg/88 lb while the retractable 16 mm/ 5/8 in pin can hold a capacity up to 10 kg/22 lb. The offset swivel grid clamp attaches to pipes, truss or grids and is also used to control the extension of the first section of the hanger. The clamping range is 10 to 55 mm/0.4 to 2.16 in. One safety cable with locking pin is included to add extra security for the inserted junior pins which mount into the receiver. Recommended Accessories: C155, C1575B, C210, C150, C100, C338, C339UH, C461-1, C465-1, C345-1, C345K-1.
SKU: AVN-C888UH -
-
Clamps Grip Head
Avenger D100 Grip Double Head 2 Heads on 3/8” Diameter Rod Rod is 13.46cm Long
The Avenger D100 Double Grip Head is a combination of two joined 6.35cm (2.5″) grip heads, mounted on a steel plate with a 10mm (3/8″) diameter rod. The D100 allows mounting of double the amount of light modifiers as the standard head.
SKU: AVN-D100 -
Clamps Grip Head
Avenger D200 Grip Head T-Top Handle 2 5in 5/8 3/8 1/2 1/4 Dia Accesories Polished Alum weighs 55g
Clamps Grip HeadAvenger D200 Grip Head T-Top Handle 2 5in 5/8 3/8 1/2 1/4 Dia Accesories Polished Alum weighs 55g
The Avenger D200 Grip head is an industry leader in terms of its strong locking power and design. The D200 2 1/2 in/6.35 cm grip head equipped with a non-slip brake pad disc similar to what is found in the automotive industry provides superior locking power to hold scrims, floppies, flags and cutters in various positions. The D200 uses an aluminum T-Handle with a comfortable T-Top cover to provide exceptional torque when positioning equipment. Grip heads are ideal to work with on C-Stands and can be used on the Avenger range of C-Stands and others. A secondary M10 hole to accept the locking handle is available if needed for other types of spigots if a C-Stand is not near by. Ideal for film sets, photo and video applications whether in studio or on location combined with other accessories, the D200 is an extremely versatile tool and will help to solve many lighting and light shaping needs. Grip arms, gobos, flags and floppies are the most popular accessories to mount to grip heads. Recommended Accessories: D500, D520, E650, A2030D, A2033L, A2033F, E250, F800, F805, F808, C1575B, E600, Roller Bag AVCSA1301B.
SKU: AVN-D200 -
Clamps Grip Head
Avenger D200B Grip Head T-Top 2 5in BLACK 5/8 3/8 1/2 1/4 Dia Accesories Alum weighs 55g
Clamps Grip HeadAvenger D200B Grip Head T-Top 2 5in BLACK 5/8 3/8 1/2 1/4 Dia Accesories Alum weighs 55g
The Avenger D200B Grip head in black is an industry leader in terms of its strong locking power and design. The D200B 2 1/2 in/6.35 cm grip head equipped with non-slip brake pad disc similar to what is found in the automotive industry provides superior locking power to hold scrims, floppies, flags and cutters in various positions. The D200 uses an aluminum T-Handle with a comfortable T-Top cover to provide exceptional torque when positioning equipment. Grip heads are ideal to work with on C-Stands and can be used on the Avenger range of C-Stands and others. A secondary M10 hole to accept the locking handle is available if needed for other types of spigots if a C-Stand is not near by. Ideal for film sets, photo and video applications whether in studio or on location combined with other accessories, the D200 is an extremely versatile tool and will help to solve many lighting and light shaping needs. Grip arms, gobos, flags and floppies are the most popular accessories to mount to grip heads. Recommended Accessories: D500B, D520B, E650, A2030DCB, A2033LCB, A2033FCB, E250, F800, F805, F808, C1575B, E600, Roller Bag AVCSA1301B.
SKU: AVN-D200B -
Clamps Grip Head
Avenger D220 Grip Baby Helper fixed 16mm pin
Just as the name suggests, the Grip Helper is like three Grip Heads in one. Two independent grip heads sandwich a third with a fixed 16mm pin. This system allows multiple light control accessories to mount in front of fixtures without the need for numerous light stands.
SKU: AVN-D220 -
Clamps Super and Spring
Avenger D230 Clamp Super Grip Head Inc. D200B and C1575B
Avenger D230 Clamp Super Grip Head Inc. D200B and C1575B.? Black.
The Avenger Grip Head System components are designed to hold and position a range of scrims, flags, floppies, cutters, dots and fingers.
This black grip head with integrated super clamp allows to position scrims and flags in positions that C-stands cannot reach.
SKU: AVN-D230 -
Clamps Grip Head
Avenger D240 Grip Head with swivel pin
This Avenger D240 Swivel Grip Head adds versatility to any C-stand. In addition to supporting a light head, it adds tilt, accepts umbrellas, grip arms and flags. The D240 Swivel Grip Head features two famous Avenger accessories connected together to assure a wide range of fixing solutions. Attachments: 16mm male pin + 16mm female socket 28mm male pin.
SKU: AVN-D240
