DJI Two-Way Battery Charging Hub for Neo
For DJI Neo Intelligent Flight Batteries
Charge Up to 3 Batteries Simultaneously
Requires 45W or Higher Power Adapter
Can Double as Power Bank with 1 Battery
$49.00
The DJI Two-Way Battery Charging Hub for Neo allows you to rapidly recharge up to three drone batteries simultaneously. This hub is designed to accommodate one, two, or three Neo intelligent flight batteries, fully charging them in around 60 minutes when paired with a 45W or higher charger (not included). Additionally, when only one battery is placed in the hub, it can function as a power bank, enabling you to recharge devices such as DJI Goggles or smartphones.
Related products
-
Battery adapters and DC couplers
Aputure Power Station V-Lock 2-Bay
The Aputure 2-Bay Battery Power Station is a battery inverter that uses two industry-standard 14.4V/14.8V Gold or V Mount batteries and outputs a 48V DC current via 3-pin XLR. With this power station, users can bring the flexibility of battery power to any 48V lighting fixture, such as the Nova P300c or Amaran 100 & 200 series of LED lights.
SKU: APU-25.2BAYPWST -
Battery adapters and DC couplers
Dynacore D-C Multi-Voltage Splitter V-Lock for camera rigs
Dynacore D-C Voltage splitter allows for connection of Multiple devices requiring different voltages on a camera rig.Multi-output adapter designed for DSLR cameras and accessories.
Output Voltage: 5V/7.2V/12V/15V(11V to 17V).
Built-in HDMI distributor, one standard signal input and two standard signal output.
V-Mount ENG batteries are required for the power.SKU: DYN-D-C Mount(With out HDMI) -
Battery adapters and DC couplers
Tether Tools Case Relay Camera Power System
- Continually power your camera with USB battery packs
- Hot swap batteries mid-shooting with no downtime
- No need to purchase multiple camera batteries
- Compatible with most camera brands
- Can be adapted to work with D-Tap batteries; use D-Tap to USB Converter
- More cost effective than purchasing multiple proprietary camera batteries
- Power sources are non-proprietary. Power your camera with the same 5V battery you use to charge phones or tablets.
- Never need to charge camera batteries again. And never run out power.
- A Relay Camera Coupler (sold separately) is required to use Case Relay External Power System.
SKU: TET-30.CRUPS110 -
Battery adapters and DC couplers
Dynacore D-2BS-24 Converter V-Lock 14.8V input to 24V output
D-2BS/A-24 is a power station designed to utilise two 14.4 volt V-Lock batteries creating a power source outputing power for any device needing 24Volts, such as an LED panel.
It can supply up to 240Watt output (24V, 10A).
Designed to work with equal power batteries where a larger capacity is preferredLCD Display indicates Output Voltage
The unit has a Low Voltage Indicator LED to warn of potential problems shown here:
Color Red=Under/Over Voltage
Color Green=Good
Green Blinking=Battery LowOutput is via 3 Pin Female XLR Output
24V, 10A, 240W(Max)A Hexagon connector can be mounted to a stand using a super clamp or convi clamp.
SKU: DYN-D-2BS-24 -
