The Blackmagic Design URSA Cine Battery Plate (B Mount) is specifically designed to work with the URSA Cine camera. The sturdy plate enables the attachment of a single third-party B-mount battery directly to the rear of your camera without the need for any extra cabling.
Blackmagic Design URSA Cine Battery Plate (B-Mount)
For Mounting B-Mount Batteries
Attaches Directly to Camera
No Additional Cabling Required
$151.00
Related products
-
Battery adapters and DC couplers
Jupio ProLine V-Mount Adapter plate for 2x Sony NP-F Series Batteries
Battery adapters and DC couplersJupio ProLine V-Mount Adapter plate for 2x Sony NP-F Series Batteries
0 out of 5(0)- V-Mount Adapter plate allows you to use 2 x Sony NP-F series batteries
SKU: JUP-BVM0250 -
Battery adapters and DC couplers
Dynacore D-MS-CA Mount Tiny V-Lock for camera cage
0 out of 5(0)Dynacore Tiny V-Lock Cage mount.
It can be fixed in any position in the camera cage with 1/4 thread.
It includes Two D-tap outputs for powering of multiple devices.
Weight: 0.1Kg
Size: 112*83*26mm
SKU: DYN-D-MS-CA -
Battery adapters and DC couplers
Dynacore D-AS Gold Mount to V-Lock Adaptor
0 out of 5(0)It may convert the Gold Plate to the V-Lock bracket. It offers a solution to allow the use of V-lock batteries on Gold mount cameras.
It can also be used as a charge adapter, enabling you to charge V-lock batteries on Gold mount chargers.
- Lock V-Mount battery to the V mount side of the D-AS, then the battery converts into AB mount.
- Lock Gold Mount side of D-AS with the camera, then the battery ready to work.
Weight: Approx 0.15Kg
Dimension: 124×97×40mmSKU: DYN-D-AS -
Battery adapters and DC couplers
Dynacore D-2BS-24 Converter V-Lock 14.8V input to 24V output
0 out of 5(0)D-2BS/A-24 is a power station designed to utilise two 14.4 volt V-Lock batteries creating a power source outputing power for any device needing 24Volts, such as an LED panel.
It can supply up to 240Watt output (24V, 10A).
Designed to work with equal power batteries where a larger capacity is preferredLCD Display indicates Output Voltage
The unit has a Low Voltage Indicator LED to warn of potential problems shown here:
Color Red=Under/Over Voltage
Color Green=Good
Green Blinking=Battery LowOutput is via 3 Pin Female XLR Output
24V, 10A, 240W(Max)A Hexagon connector can be mounted to a stand using a super clamp or convi clamp.
SKU: DYN-D-2BS-24 -
Battery adapters and DC couplers
Nanlite BH-FZ60 Battery handle NPF
0 out of 5(0)A handheld grip, battery buckle, and low mount stand all-in-one.
This clever Nanlite battery mount holds two Sony NP-F (L series) batteries to power the Nanlite Forza 60. The battery handle also doubles as a low-mount light stand.
The BH-FZ60 handle also makes it easy to handhold the Foza 60 for lighting moving subjects, for light painting, and for creating a ‘wash of light’ effect in your video.
The battery handle grip can be mounted on a light stand when you wish to power your Nanlite Forza 60 from NP-F batteries.
The BH-FZ60 battery handle includes a 5.5mm DC-out cable to connect to the DC-in port on the Nanlite Forza 60 or Forza 60B.
SKU: NAN-NNBHFZ60