SmallRig Cooling System for Sony / Canon / FUJIFILM Cameras 4815
1. High-efficiency fan with TEC cooling module to quickly cool down the camera.
2. Automatic intelligent temperature control design.
3. Snap-on installation, easy to install and remove, compatible with more cameras.
4. Can be used with or without a camera cage, lighter and freer to use.
5. Compatible with V-Mount Battery Mount Plate Kit 4064B / 4063B, with V-Mount batteries and other uses, convenient power supply.
$82.90
SmallRig Cooling System for Sony / Canon / FUJIFILM Cameras 4815
SmallRig Cooling System for Sony / Canon / FUJIFILM Cameras 4815 is designed to cool down Sony mirrorless cameras and enhance the recording duration of high-specification videos. The cooling system utilizes a high-efficiency fan with a TEC cooling module to quickly cool the camera and effectively alleviate overheating problems. Built-in intelligent temperature control design, the cooling system automatically adjusts the cooling system power according to the temperature of the contact surface between the cooling system and the camera, easy to use. Snap-on mounting design, easy to remove and install, compatible with more models. Can be used with or without a camera cage, and it is lighter and freer to use. The cooling system is compatible with V-Mount Battery Mount Plate Kit 4064B / 4063B, with V-Mount battery 3579 / 3580 / 4292 use, heat dissipation, and power supply without worry.
Note:
1. After installing this product, the camera’s LCD screen will not be able to be stowed. If you need to store the LCD screen, please remove the cooling system first.
2. This product does not have a built-in battery and needs to be powered by connecting to an external power source for proper operation.
3. This product is not waterproof, please do not store or use it in a humid environment.
4. Do not block the air inlet or outlet when the Cooling System is in operation.
5. Do not use the Cooling System to continue cooling the camera when the camera is not operating to prevent condensation inside the camera.
6. When not in use, press and hold the power switch for about 2 seconds to enter standby mode or disconnect the power cord to turn off the device.
Related products
-
Camera rig attachments, brackets and components
SmallRig 3206 Sunhood for Sony Alpha 7S III/Alpha 7C/ZV-1/FX3 Camera
Camera rig attachments, brackets and componentsSmallRig 3206 Sunhood for Sony Alpha 7S III/Alpha 7C/ZV-1/FX3 Camera
1. Dedicated Shading Hood for Sony Alpha 7 IV / A7S III / A7C / ZV-E1 / ZV-E10 / ZV-1F / ZV-1 II / ZV-1 / FX3.
2. Reduces reflections during shooting and shades the screen.
3. Slide-in mounting, fastened by hook & loop.
4. Raised internal edges for stability and to prevent twists.
5. Folded flat for transport and storage.SKU: SRI-3206 -
Camera rig attachments, brackets and components
Manfrotto Rods 300mm for Camera Cage Fits MVCCS, MVCCM, MVCCL paired with MVCCBP
Camera rig attachments, brackets and componentsManfrotto Rods 300mm for Camera Cage Fits MVCCS, MVCCM, MVCCL paired with MVCCBP
These 300mm (11.8”) long Rods are one of the basic building blocks of all SYMPLA rigs, and are always used in parallel pairs to create a track which allows components to be mounted and positioned correctly.
Rods can be united to make longer tracks (using the included screw junctions), joined at different heights using the V-Offset component, or shifted laterally using the H-Offset component. Although the possible uses are numerous, these long Rods primarily serve as the track for SYMPLA Fixed or Variable Plates, since the extra length allows a wide range of camera and lens (and viewfinder) combinations to be correctly positioned for the operator and for other SYMPLA components, such as the Flexible Mattebox.
Made in 15mm (0.59”) diameter tubular aluminum for strength and reduced weight, 300mm Rods are the longer of SYMPLA’s two sizes. Supplied as a pair, with two 1/2”-13UNC screw junctions included.
SKU: MAN-MVA520W
